• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문 발표회
• /
• pp.43-48
• /
• 2003

This paper investigate that the effect of the concrete containing mineral admixtures(pozzolanic materials such as fly-ash, ground granulated blast-furnace slag, silica fume and meta kaolin) on the resistance properties to chloride ion invasion. The purposed testing procedure was applied to the concrete added mineral admixtures for 3~4 replacement ratios under W/B ratios ranged from 0.40 to 0.55. For the electrical migration test, Tang and Nilsson's method was used to estimate the migration coefficient of chloride ion. As a results, the W/B ratios, kinds of admixture and replacement ratios, water curing periods had a great effect on the migration coefficient of chloride ion, and the optimal replacement ratios of admixture had a limitation for each admixtures. Also, the addition of mineral admixtures by mass(replacement of OPC) enhanced the resistance of the mixture to chloride penetration compared with the plain concrete. The amount of acid soluble chloride ions and water soluble chloride ions were varied with the kinds of mineral admixtures. The compressive strength was shown related to the migration coefficient of chloride ion, the compressive strength increased with the decreasing migration coefficient of chloride ion. Below the 50MPa, the variation of migration coefficient of concrete added mineral admixtures was bigger than plain concrete.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.43-48
• /
• 2003

This paper investigate that the effect of the concrete containing mineral admixtures(pozzaolanic materials such as fly-ash, ground granulated blast-furnace slag, silica fume and meta kaolin) on the resistance properties to chloride ion invasion. The purposed testing procedure was applied to the concrete added mineral admixtures for 3∼4 replacement ratios under W/B ratios ranged from 0.40 to 0.55. For the electrical migration test, Tang and Nilsson's method was used to estimate the migration coefficient of chloride ion. As a results, the W/B ratios, kinds of admixture and replacement ratios, water curing periods had a great effect on the migration coefficient of chloride ion, and the optimal replacement ratios of admixture had a limitation for each admixtures. Also, the addition of mineral admixtures by mass(replacement of OPC) enhanced the resistance of the mixture to chloride penetration compared with the plain concrete. The amount of acid soluble chloride ions and water soluble chloride ions were varied with the kinds of mineral admixtures. The compressive strength was shown related to the migration coefficient of chloride ion, the compressive strength increased with the decreasing migration coefficient of chloride ion. Below the 50MPa, the variation of migration coefficient of concrete added mineral admixtures was bigger than plain concrete.

• Nuclear Engineering and Technology
• /
• 제41권10호
• /
• pp.1333-1346
• /
• 2009

To assure the reliability of cylinders or shells with fluid-filled annulus, it is necessary to investigate the modal characteristics considering fluid-structure interaction effect. In this study, theoretical background and several finite element models are developed for cylindrical shells with fluid-filled annulus considering fluid-structure interaction. The effect of the inclusion of the fluid-filled annulus on the natural frequencies is investigated, which frequencies are used for typical dynamic analyses such as responses spectrum, power spectral density and unit load excitation. Their response characteristics are addressed with respect to the various representations of the fluid-structure interaction effect.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권8호
• /
• pp.1239-1250
• /
• 2004

This research was concerned with the enhancement of heat transfer by surfactant added to the aqueous solution of LiBr. Different vertical tubes were tested with and without an additive of normal octyl alcohol. The test tubes are a bare inner surface. a groove inner surface, a corrugated inner surface and a spring inserted inner surface tubes. The additive concentration was about 0.08 mass%. The heat transfer coefficient was measured as a function of the film Reynolds number in the range of 20~200. Experiments were carried out at higher cooling water temperature of $35^{\circ}C$ to simulate an air cooling condition for several kinds of absorber testing tubes. The experimental results were compared with and without surfactant. The enhancement of heat transfer by Marangoni convection effect which was generated by addition of the surfactant is observed in each test tube. Especially, it is clarified that the tube with an inserted spring has the highest enhancement effect.

• Nuclear Engineering and Technology
• /
• 제54권10호
• /
• pp.3962-3973
• /
• 2022

Several critical heat flux (CHF) correlations including the look-up table in the MARS code have been assessed for the prediction of CHF in a downward-flow narrow rectangular channel. For the assessment, we built an experiment database that covers pressures between 1.01 and 39.0 bar, gap sizes between 1.09 and 6.53 mm, mass fluxes up to 25,772 kg/m²s, and under one-sided and two-sided heating conditions. The results of the assessment showed that the Kaminaga correlation has the best overall prediction compared to others. However, because the correlation uses global variables, such as inlet and outlet subcooling and total heat transfer area, it is difficult to use in a system code. A new CHF correlation is then proposed by replacing the global variables in the Kaminaga correlation with local ones and adding correction factors to consider the effect of gap size, mass flux, and the number of heating walls. Additional correction factor is added to consider the effect of inlet subcooling. It is shown that the new one is better than the Kaminaga correlation and it is easy to implement to any system code.

• 한국항공우주학회지
• /
• 제44권7호
• /
• pp.576-584
• /
• 2016

본 연구는 다단 하이브리드 로켓의 낮은 비추력 성능을 향상시키는 방법으로 AP 첨가 추진제를 제안하고 있다. 추진제에 첨가된 AP 첨가비율 변화에 따라 다단 하이브리드 로켓의 비추력 성능 변화와 연료과농 연소특성 변화를 살펴보았으며, 이때 AP 첨가비율은 하이브리드 로켓의 연소 특징을 유지하기 위해 최대 15 wt%로 제한하였다. 결과에 의하면, AP 15 wt% 추진제는 AP 0 wt% 추진제와 비교하여 비추력 성능이 약 3% 향상되었다. 또한, 동일한 연소온도를 유지함에도 불구하고, AP 첨가비율을 증가시키면 산화제 유입량, O/F비 변화량, 그리고 연소압력은 감소하며 반경반향 온도 분포가 좋아지는 등 다단 하이브리드 로켓의 성능향상에 긍정적인 효과가 나타났다. 그러나 오직 AP를 추진제에 첨가하는 것만으로 다단 하이브리드 로켓의 비추력 성능을 일반 화학로켓의 수준으로 향상시키는 것이 매우 어려운 일임을 고려할 때, 추가적으로 금속입자 첨가를 통해 비추력 성능을 향상시킬 계획이다.

• 예술인문사회 융합 멀티미디어 논문지
• /
• 제7권7호
• /
• pp.671-678
• /
• 2017

본 연구는 광고산업과 영화산업의 산업연관분석 효과를 살펴보기 위해 산업연관분석을 실시하였다. 분석 결과, 1993년부터 2008년까지 생산유발효과가 증가 추세를 보여 광고산업의 증가가 영화산업의 생산성에 긍정적인 영향력을 가지고 있는 것으로 나타났다. 그러나 2009년부터 2012년까지 다시 감소하였으며, 2014년에는 0.028원으로 이전보다 생산유발효과가 증가한 것으로 나타나 광고산업의 영향력이 안정적이진 않았다. 부가가치효과의 경우, 연도별로 등락이 빈번한 것으로 나타났다. 광고산업의 전방연쇄효과를 파악하기 위해 감응도 계수를 살펴본 결과, 점차 감소하고 있는 것으로 나타났다. 후방연쇄효과를 나타내는 영향력 계수의 경우에는 1998년 이후 감소 추세를 보이다가 2009년을 기점으로 증가한 것으로 나타났다. 본 연구결과는 광고산업이 미디어 산업에 미치는 후방연쇄효과가 크다는 기존연구의 결과를 재확인하였으며, 광고산업이 영화산업의 발전에 기여하고 있음을 나타내는 결과이다. 본 연구는 광고산업이 영화산업에 미치는 영향을 분석함으로써 광고산업의 산출물의 투입에 따른 영향력을 검증하였으나, 후속연구로서 영화산업에 대한 광고산업의 영향력과 출판, 방송 등의 타 산업 간의 비교가 필요하다.

• 공업화학
• /
• 제24권2호
• /
• pp.208-213
• /
• 2013

본 연구에서는 인계 난연제가 첨가된 연질 폴리우레탄 폼을 합성하여 난연제의 종류에 따른 난연성능 변화를 고찰하였다. 난연제로는 Tetramethylene bis(orthophosphorylurea) [TBPU]와 Phosphinyl alkylphosphate ester [CR-530], Resorcinol bis diphenylphosphate [RDP], Triethyl phosphate [TEP] 등을 사용하였다. 열중량분석기를 사용하여 난연제에 따른 폴리우레탄 폼의 열분해거동을 알아보았으며, 콘칼로리미터를 이용하여 열방출량, 질량감소율, 연기발생량, CO 및 $CO_2$ 발생량 등을 측정하였다. TBPU가 첨가된 폴리우레탄 폼은 난연제가 첨가되지 않은 폴리우레탄 폼에 비하여 낮은 온도에서 분해가 시작되었으나 고온에서는 많은 양의 char를 생성하였다. 콘칼로리미터 시험 결과 TBPU가 첨가될 경우 평균 발열량, 최대 발열량, 유효연소열, 질량감소율, CO 및 $CO_2$ 발생량이 감소하였고 다른 난연제에 비하여 낮은 값을 나타내어 우수한 난연성능을 나타냄을 알 수 있었다.

• 한국주조공학회지
• /
• 제34권6호
• /
• pp.194-199
• /
• 2014

The effect of $Al_2Ca$ on the oxidation resistance and tensile property of Al-5Mg alloys was investigated. According to the TGA (Thermogravimetric analysis) result at $550^{\circ}C$ after 24hrs, the Al-5Mg alloy showed parabolic behavior with weight gain. On the other hand, there was almost no difference in the weight changes of the $Al_2Ca$ added Al-5Mg alloys during the oxidation. It was thought that the improvement of oxidation resistance in $Al_2Ca$ added Al-5Mg alloys might be due to the formation of a protective oxide layer with CaO and MgO on the surface. The microstructures of the alloys showed grain refinement with an increasing $Al_2Ca$ content. From the tensile test, the yield strength of the alloys were improved with an increasing $Al_2Ca$ content. The 0.07 mass%$Al_2Ca$ added Al-5Mg alloy showed similar elongation and increased strength, simultaneously. It was considered that the addition of $Al_2Ca$, which was superior in the oxidation resistance of Al, reduced the formation of Mg oxides and inclusions during the alloying. This, partly led to the improvement of tensile properties.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.323-332
• /
• 2014

High-speed marine vehicles can take advantage of aerodynamically supported platforms or air wings to increase maximum speed or transportation efficiency. However, this also results in increased complexity of boat dynamics, especially in the presence of waves and wind gusts. In this study, a mathematical model based on the fully unsteady aerodynamic extreme-ground-effect theory and the hydrodynamic added-mass strip theory is applied for simulating vertical-plane motions of a tunnel hull in a disturbed environment, as well as determining its steady states in calm conditions. Calculated responses of the boat to wind gusts and surface waves are demonstrated. The present model can be used as a supplementary method for preliminary estimations of performance of aerodynamically assisted marine craft.