• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.1
• /
• pp.62-68
• /
• 2014

Recently, MRI(magnetic resonance imager) scanner is continually used for medical diagnosis and many biomedical researches. When it operates, however, intense noise is generated. The SPL(sound pressure level) of the noise approaches 130 dB especially in 3 T(Tesla) MRI. Meanwhile, more than 3 T MRI scanners have been developed to get higher-resolution images, so louder noise is expected in the future. The intense noise makes patients feel nervous and uncomfortable. Moreover, it could possibly cause hearing loss to patient in extreme cases. For this reason, some active noise control systems have been researched. One of them used feedback Filtered-X LMS(FXLMS) algorithm which is able to control only narrowband noises and possible to diverge in severe case. In this paper, we determine the property of MRI noise. Using the property, we applied a method of open-loop and adaptive control for reducing MRI noise at target point inside bore. We verified performance of the method with computer simulation and preliminary experiment. The results demonstrate that the method can effectively reduce MRI noise at target point.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.7
• /
• pp.609-615
• /
• 2007

We propose an optimized adaptive PID control scheme. This paper is focused on the development of model reduction as well as a new adoptive control structure (viz. a recursive least square estimation (RLSE) method-based structure) that is constructed with smith-predictor structure and a real time estimator. The estimator adjust parameters of a reduced model in real time. It leads to robust and superb control performance for the noise or variation of parameters of process. Experimental study reveals that the proposed control structure exhibits more superb output performance in comparison to some previous methods.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.107-110
• /
• 2003

In this paper, the optimal position selection of error sensors and transducers to attenuate interior noise from outside noise sources using active control techniques is presented. To get an optimal control characteristics in adaptive noise control systems, it is necessary to optimize the positions of sensors and transducers. A new type of simulated annealing method has been proposed as searching technique to find optimal transducers and sensors positions in which the sum of the squared pressures at sensor position in an enclosure can be best minimized. Computer simulations and experiments have been performed to show the effectiveness of the proposed method.

• Journal of Industrial Technology
• /
• v.18
• /
• pp.317-322
• /
• 1998

The purpose of this present experiments was to simulate the Active noise control system using MATLAB Tool kit. The Least-Mean-Square algorithm is the most applicable one to optimize the ANC systems, even it has tight limitation. This paper shows the influence of choosing step size to the performance of the LMS adaptive filters. In addition to the simulation, this paper describes the method to design the filtered LMS algorithm to get the better performance in Active noise control. It contains the secondary-path modeling to realize the real Active noise control system in the requesting fields.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.764-769
• /
• 1994

The impedance of an electro-acoustic transducer can be controlled by motional feedback, and the noise in a duct can be reduced actively by adjusting the impedance using an additional sound. In this paper, two approaches for active noise control using motional feedback (MFB) loudspeaker are described. First configuration uses an external sensor to pickup of source directly. In this configuration, the adaptation of controller is necessary to compensate the change of transfer function from noise source to control poing. The second configuration uses a new adaptive algorithm specialized for peridic noise. Because this configuration does not require any reference input and the error sensor couples very tightly with control loudspeaker, this MFB system itself is independent of the duct condition. No microphone are required in both configurations, so that a more reliable and stable active control system can be realized under severe conditions such as high pressure, high temperature, dust, flow and so on.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.883-885
• /
• 2013

Image restoration refers to removing different kinds of noise added to image, and to reducing effect of noise upon image. For image restoration, some methods such as mean filter, median filter and weighted filter were proposed, but the existing methods have poor denoising and edge-reserved performance. Therefore, in this paper modified median filter algorithm was proposed that enlarges mask size according to median value of mask in order to remove noise efficiently. And, it was compared by simulation to the existing methods, and MSE(mean squared error) was used on a criterion of evaluation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6C
• /
• pp.343-348
• /
• 2011

This paper introduces a design for real time wireless headset using ANC (active noise control) system based on NFxLMS adaptive filter algorithm. The training time of the proposed system is significantly reduced by using the RMS delay spread of a channel as an error correction parameter, and convergence rate of the FxLMS filter has been improved with updating the coefficients of the NFxLMS filter, which we have got during the training process. Our system has shorter training time and better convergence rate at the same noise reduction level than the conventional system under real noisy environment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.10
• /
• pp.797-802
• /
• 2016

This paper proposes a noble voice recognition method based on an adaptive MFCC and deep learning for embedded systems. To enhance the recognition ratio of the proposed voice recognizer, ambient noise mixed into the voice signal has to be eliminated. However, noise filtering processes, which may damage voice data, diminishes the recognition ratio. In this paper, a filter has been designed for the frequency range within a voice signal, and imposed weights are used to reduce data deterioration. In addition, a deep learning algorithm, which does not require a database in the recognition algorithm, has been adapted for embedded systems, which inherently require small amounts of memory. The experimental results suggest that the proposed deep learning algorithm and HMM voice recognizer, utilizing the proposed adaptive MFCC algorithm, perform better than conventional MFCC algorithms in its recognition ratio within a noisy environment.

• Journal of information and communication convergence engineering
• /
• v.9 no.5
• /
• pp.591-596
• /
• 2011

Image denoising is a key issue in all image processing researches. Generally, the quality of an image could be corrupted by a lot of noise due to the undesired conditions of image acquisition phase or during the transmission. Many approaches to image restoration are aimed at removing either Gaussian or impulse noise. Nevertheless, it is possible to find them operating on the same image, which is called mixed noise and it produces a hard damage. In this paper, we proposed noise type classification method and a mixed nonlinear filter for mixed noise suppression. The proposed filtering scheme applies a modified adaptive switching median filter to impulse noise suppression and an efficient nonlinear filer was carried out to remove Gaussian noise. The simulation results based on Matlab show that the proposed method can remove mixed Gaussian and impulse noise efficiently and it can preserve the integrity of edge and keep the detailed information.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.290-292
• /
• 1993

In this paper, analysis of the noise induced by rotating machines and the mode analysis of a 3-dimensional enclosure are presented. Adaptive active noise control algorithms for the multi-channel case are proposed. Computer simulations were done to show usefulness of the designed algorithm in a 3-dimensional enclosure case.