• The Journal of the Acoustical Society of Korea
• /
• 제15권2E호
• /
• pp.39-44
• /
• 1996

The performance of two-channel adaptive noise canceller is ofter degraded by the weights perturbation due to the speech signal. In this paper, an adaptive noise canceller employing a speech detector and two adaptation algorithms which are switched according to the speech detector is proposed. When highly correlated speech signal is detected, the tap weights of the adaptive filter are adapted by the sign algorithm. On the other hand, the weights are adapted by the NLMS algorithm when silence is detected or when the characteristics of the noise propagation channel is changed. The employed speech detector utilizes the power ratio of the input and the output of an adaptive linear prediction-error filter. According to the computer simulation, the proposed method yields better performance than conventional ones.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.758-760
• /
• 1995

The purpose of noise cancellation is to estimating signals corrupted by additive noise or interference. In this paper, an adaptive noise canceller is built from a Walsh filter with a new adaptive algorithm. The Walsh filter consists of a Walsh function. Since the Walsh functions are either even or odd functions, the covariance matrix in the tap gain adjustment algorithm can be reduced to a simple form. In this paper, minimization of the mean squre error is accomplished by a proposed adaptive algorithm. The conventional adaptation techniques use a fixed time constant convergence factor by trial and error methods. In this paper, a convergence factor is obtained that is tailored for each adaptive filter coefficient and is updated at each block iteration.

• Nuclear Engineering and Technology
• /
• 제55권12호
• /
• pp.4570-4575
• /
• 2023

Noise and Radio-frequency interference or RFI causes a significant restriction on the Free induction Decay or FID signal detection of the Nuclear Quadrupole Resonance procedure. Therefore, using this method in non-isolated environments such as industry and ports requires extraordinary measures. For this purpose, noise reduction algorithms and increasing signal-to-noise-and-interference ratio or SNIR have been used. In this research, sodium nitrite has been used as a sample and algorithms have been tested in a non-isolated environment. The resonant frequencies for the 150 g of test sample were measured at 303 K at about 1 MHz and 3.4 MHz. The main novelty in this study was, (1) using two types of antennas in the receiver to improve adaptive noise and interference cancellation, (2) using a separate helical antenna in the transmitter to eliminate the duplexer, (3) estimating the noise before sending the pulse to calculate the weighting factors and reduce the noise by adaptive noise cancellation, (3) reject the interference by blanking algorithm, (4) pulse integration in the frequency domain to increase the SNR, and (5) increasing the detection speed by new pulse integration technique. By interference rejection and noise cancellation, the SNIR is improved to 9.24 dB at 1 MHz and to 7.28 dB at 3.4 MHz, and by pulse integration 44.8 dB FID signal amplification is achieved, and the FID signals are detected at 1.057 MHz and 3.402 MHz at room temperature.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2429-2432
• /
• 2000

Adaptive filter algorithm has been used for plant identifier and noise cancellation. This algorithm has been researched for performance enhancement of filtering. The design and development of a reliable system has been becoming a key issue in industry field because the reliability of a system is considered as an important factor to perform the system's function successfully. And the computing with reliability and fault tolerance is a important factor in the case of aviation and nuclear plant. This paper presents design of reliable adaptive filter with fault tolerance. Generally, redundancy is used for reliability. In this case it needs computing or circuit for voting mechanism or computing for fault detection or switching part. But this presented Filter is not in need of computing for voting mechanism, or fault detection. Therefore it has simple computing, and practicality for application. And in this paper, reliability of adaptive filter is analyzed. The effectiveness of the proposed adaptive filter is demonstrated to the case studies of plant identifier and noise cancellation by using DSP.

• 소음진동
• /
• 제2권2호
• /
• pp.107-116
• /
• 1992

An adaptive signal processing technique is implemented for the active noise cancellation of the plane acoustic wave propagating in a duct. To avoid the instability caused by the acoustic feedback from the control speaker to the detect microphone, an off-line modeling of the acoustic feedback plant is done using the FIR filter. Auxiliary path required for the filtered-x LMS algorithm is modeled as well. Before going into the experiments, a simulation is carried out under the same conditions with experiments. The simulation shows that the longer the length of the adaptive filter is, the better the results are achieved. Experiments have been carried out at lower audio frequency range (50 - 400Hz), and the results are in good agreements with those of simulation study. As a results of this adaptive noise control, around 50dB is reduced for a pure tone noise, and for a bandlimited noise with the bandwidth of 316Hz, a maximum of 30dB noise reduction is attained.

• 한국통신학회논문지
• /
• 제16권3호
• /
• pp.259-269
• /
• 1991

본 논문에서는 전력선 채널에서 가장 심각한 문제인 임펄스성 고조파 잡음을 제거하기 위한 디지털 신호 처리 기술을 LMS(Least Mean Square)와 ITLMS(Individual Tapped LMS)의 두 가지의 알고리즘을 사용한 선형 예측에 의한 전력선 고조파 잡음 제거 방식을 통해 다루었고 각종 재밍(jamming)에 강한 특징을 가지는 DS(Direct sequnce) 대역 확산 통신을 전력선 채널에 적용하여 전송 성능의 개선을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.645-651
• /
• 2003

The system in which a microphone and a loudspeaker are simultaneously used can cause an echo. The echo is caused by feedback between the output of the loudspeaker and the input of the microphone. The acoustic echo canceller is a device to cancel the echo in a communication system. Its general procedure for cancellation is first estimating the plant response of the feedback path and then eliminating the feedback signal from the input signal. In this paper, full-band and sub-band approaches are compared by using some simulation examples.

• 한국인터넷방송통신학회논문지
• /
• 제9권2호
• /
• pp.105-110
• /
• 2009

GSM 단말기에서 GSM 통신모듈과 DVB-H 방송 수신기가 복합화 되었을 경우, GSM 신호의 간섭으로 인해 DVB-H 수신 성능이 감소된다. 본 논문에서는 적응형 간섭 잡음제거 기법으로 GSM 간섭 신호성분을 제거함으로써 DVB-H 수신 성능을 개선하는 시스템을 제안한다. Low-noise ADC를 포함한 적응형 필터를 설계함으로써 RF단에서 간섭 잡음신호를 제거할 수 있다.

• 한국정보통신학회논문지
• /
• 제26권11호
• /
• pp.1713-1719
• /
• 2022

처리지연이 적은 노이즈 캔슬러일수록 샘플링 주파수를 높일 수 있으므로 더 좋은 품질의 출력 신호를 얻을 수 있다. 단일 버퍼를 사용할 경우 프로세서가 입력된 데이터를 처리하는 동안 새로운 데이터를 버퍼에 쓰기가 불가능하므로 처리지연이 발생한다. 이러한 처리지연은 안티-노이즈와 출력 신호를 합성시킬 때 위상을 일치시키기 위한 추가적인 버퍼링 오버헤드를 발생시킨다. 본 논문에서는 대칭적 Even-Odd-buffer 구조를 사용하여 읽기와 쓰기 작업을 번갈아 가며 수행함으로써 처리지연을 최소화하고 처리속도를 높일 수 있는 가속기의 구조를 제안한다. 또한, Fast Fourier Transform 기반 노이즈 캔슬링과 적응 Least Mean Square 알고리즘을 사용한 노이즈 캔슬링의 구조적 차이를 비교한다. 그 결과로 대칭적 Even-Odd-buffer를 사용하였을 때 단일 버퍼 대비 처리지연이 29.2% 줄어들었다. 제안하는 대칭적 Even-Odd-buffer 구조는 다양한 노이즈 캔슬링 알고리즘에 적용될 수 있다는 장점이 있다.

• 한국항행학회논문지
• /
• 제13권4호
• /
• pp.482-489
• /
• 2009

이 논문에서는 AWGN환경에서 발생하는 가우시안 잡음과 발진기에서 생기는 시스템 잡음을 제거할 수 있는 ALE(Adaptive Line Enhancer) 기반의 새로운 적응형 잡음 제거기를 이용한 CW(Continuous-Wave) 바이오 레이더를 제안한다. 최근에 CW 바이오 레이더를 이용해서 심장박동과 호흡을 검출하는 연구가 여러 연구기관에서 진행 되고 있다. 그러나 이 연구들은 기존 CW 바이오 레이더가 가우시안 잡음에 취약하고 그로 인해 심장박동 검출정확도도 떨어진다는 점을 설명을 하고 있긴 하지만, 그 잡음을 효과적으로 없앨 수 있는 방안은 계속 연구 중에 있다. 본 논문에서는 기저대역 신호에 포함된 잡음을 효과적으로 제거할 수 있는 ALE기반의 적응형 잡음 제거기를 적용한 것을 제안한다. 또한 타겟의 위치에 따른 복조의 민감함에 강점을 가진 quadrature 수신기를 통과한 잡음이 포함된 기저대역 신호에서 잡음만을 효과적으로 제거함으로 인해 심장박동 검출 정확도를 향상시키는 것을 모의실험을 통해 비교 분석해 본다.