• 제목/요약/키워드: Adaptive arrays

검색결과 62건 처리시간 0.028초

FPGA를 이용한 single rate Rate Adaptive Shaper 설계 (Design of single rate Rate Adaptive Shaper Using FPGA)

  • 박천관
    • 한국항행학회논문지
    • /
    • 제10권1호
    • /
    • pp.70-78
    • /
    • 2006
  • 본 논문은 RFC2963에서 제안된 single rate Rate adaptive Shaper (srRAS)를 설계한 것이다. srRAS는 RFC2693에서 제안된 하향의 single rate Three Color Marker (srTCM)과 함께 사용된 쉐이퍼이다. 그것은 가변 속도로 출력되는 tail-drop FIFO (First Input First Out) 큐이다. srTCM은 srRAS로부터의 IP 패킷 스트림을 측정한 후 그 패킷을 green, yellow, 또는 red로 마킹해 준다. 이 쉐이퍼는 AF PHB (Per Hop Behavior)를 제공하는 DS (Differentiated Service) 네트워크의 입력에서 사용되도록 제안되었다. 그리고 srRAS는 srTCM의 상향 트래픽의 버스트성을 줄여줄 수 있다. 본 논문은 srRAS의 알고리즘, 구조, 그리고 FPGA 및 관련 기술을 통하여 구현할 수 있는 방안을 언급하였다.

  • PDF

안테나 배열을 이용한 FFT-Block LMS 방식의 적응형 등화기 (FFT-Based Block Least Mean Squares Adaptive Equalizer using Antenna Arrays for High Speed Wireless Communications.)

  • 류원형;오성근
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1998년도 추계종합학술대회 논문집
    • /
    • pp.167-170
    • /
    • 1998
  • 본 논문에서는 주파수 영역에서 구현되는 안테나 배열을 이용한 적응형 등화기의 구조를 제안하였다. 제안된 방식은 주파수 영역에서 블록 LMS (least mean squares) 방식을 사용하기 때문에 수렴 속도가 빠르고 계산량이 적다. 또한 안테나 배열을 사용함으로서 다중경로 환경에서 한 개의 안테나를 사용한 경우에 비해 특히 우수한 성능을 지닌다. 다중 경로를 통한 신호들을 분리하기 위해 학습신호를 사용하여 반복적으로 출력신호와의 오차를 최소화하는 방법을 사용하였다. 시뮬레이션을 통하여 안테나의 개수, 신호의 입사각, 세기 등에 따른 성능을 분석하고, 제안된 방식이 다이버시티 시스템에 사용되는 경우에 대하여도 성능을 분석하였다.

  • PDF

LMS기반 PF-OFDM엔서의 적응 빔포밍 설계 (Adaptive beamforming for a PF-OFDM system using LMS algorithm)

  • 오준석;김재윤;유경렬
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
    • /
    • pp.2998-3000
    • /
    • 2005
  • The orthogonal frequency-division multiplexing (OFDM) technique is well known to be robust against the frequency-selective fading in wireless channels. It is due to the exploitation of a guard interval that is inserted at beginning of each OFDM symbol. Based or the conventional OFDM and a polyphase filtered orthogonal frequency division multiplexing (PF-OFDM) technique, we developed an adaptive beamforming algorithm for antenna arrays. The proposed algorithm would lead to an efficient use of channel, since it is possible to eliminate a guard interval and also easily suppress interchannel interference at the same time. In this paper, a series of computer simulations have been provided to show the performance of the proposed system.

  • PDF

Signal Processing Techniques Based on Adaptive Radial Basis Function Networks for Chemical Sensor Arrays

  • Byun, Hyung-Gi
    • 센서학회지
    • /
    • 제25권3호
    • /
    • pp.161-172
    • /
    • 2016
  • The use of a chemical sensor array can help discriminate between chemicals when comparing one sample with another. The ability to classify pattern characteristics from relatively small pieces of information has led to growing interest in methods of sensor recognition. A variety of pattern recognition algorithms, including the adaptive radial basis function network (RBFN), may be applicable to gas and/ or odor classification. In this paper, we provide a broad review of approaches for various types of gas and/or odor identification techniques based on RBFN and drift compensation techniques caused by sensor poisoning and aging.

A Cooled Deformable Bimorph Mirror for a High Power Laser

  • Lee Jun-Ho;Lee Young-Cheol;Kang Eung-Cheol
    • Journal of the Optical Society of Korea
    • /
    • 제10권2호
    • /
    • pp.57-62
    • /
    • 2006
  • Adaptive optics (AO) has been applied in various fields including astronomy, ophthalmology and high power laser systems. An adaptive optics system for a high power laser is not significantly different from other AO systems in the point of configuration except that high energy absorbed by the deformable mirror distorts the deformable mirror surface and so degrades system performance. Currently we are researching a bimorph deformable mirror for beam cleaning of a high power class laser. The bimorph mirror was considered to have 99% reflective coating and 1% absorption. So this paper first presents the temperature profiles and corresponding thermal distortions of the bimorph mirror faceplate when the mirror is under a high power lasing for 10 seconds. The analysis was accomplished by the use of finite difference and finite element computer programs to generate the element arrays, calculate the temperature profiles, and determine the structural deformations. Then this paper proposes an 'embedded wafer' type water-cooling system with derived cooling parameters.

LMS기반 PF-OFDM에서의 적응 빔포밍 설계 (Adaptive beamforming for a PF-OFDM system using LMS algorithm)

  • 유경렬;오준석
    • 대한전기학회논문지:시스템및제어부문D
    • /
    • 제55권3호
    • /
    • pp.119-123
    • /
    • 2006
  • The orthogonal frequency-division multiplexing (OFDM) technique is well known to be robust against the frequency-selective fading in wireless channels. It is due to the exploitation of a guard interval that is inserted at beginning of each OFDM symbol. Based on the conventional OFDM and a polyphase filtered orthogonal frequency division multiplexing (PF-OFDM) technique, we developed an adaptive beamforming algorithm for antenna arrays. The proposed algorithm would lead to an efficient use of channel, since it is possible to eliminate a guard interval and also easily suppress interchannel interference at the same time. In this paper, a series of computer simulations have been provided to show the performance of the proposed system.

일반 선형제약 적응배열 (General linearly constrained adaptive arrays)

  • 장병건
    • 한국음향학회지
    • /
    • 제36권3호
    • /
    • pp.151-157
    • /
    • 2017
  • 잡음신호제거 성능을 향상시키기 위하여 일반선형제약적응배열이 제안되었다. 잡음신호제거 성능이 배열계수 벡터공간에서 검토되었다. 제약면이 이득요소에 의하여 원점에 대하여 수직 방향으로 이동하는데 이득요소가 커지면 원점과의 거리는 감소하게 됨이 밝혀졌다. 따라서 이득요소의 변화가 계수벡터와 잡음신호 방향벡터와의 직교성의 정도에 영향을 주어서 일반선형제약적응배열의 잡음신호제거 성능이 이득요소에 의하여 향상되게 된다. 제안된 적응 배열은 최적의 이득요소 수치에서 간섭적인 신호환경에서는 기존의 선형제약적응배열에 비하여 더 나은 잡음신호제거 성능을 나타내고 비간섭적인 신호환경에서는 비슷한 잡음신호제거 성능을 나타냄이 관찰되었다.

광대역 chirp 신호의 방위각 추정을 위한 적응 빔 형성 (Adaptive Chirp Beamforming for Direction-of-Arrival Estimation of Wideband Chirp Signals in Sensor Arrays)

  • 김정수;최병웅;배은현;이균경
    • 한국음향학회지
    • /
    • 제27권2호
    • /
    • pp.87-91
    • /
    • 2008
  • 본 논문은 동일한 주파수 파라미터를 가지고 다른 방위에서 입사하는 chirp신호의 방위각 (DOA : Direction-of-arrival) 추정에서 상호 간섭으로 인한 bias문제를 해결하기 위하여 적응 chirp 빔형성기법을 제안한다. 제안한 기법은 기존의 STMV (STeered Minimum Variance)기법에 chirp 신호의 시간-주파수 특성을 고려함으로써 chirp신호들의 상호 간섭을 보다 효과적으로 감소시켜 방위각 추정성능을 향상시킨다. 모의 실험에서 제안한 기법과 기존의 기법들에 의한 방위각 추정성능을 비교한다.

결함 소자가 존재하는 안테나 배열을 위한 빔 형성기 (A Beamformer for Antenna Arrays with Faulty Elements)

  • 김기만;차일환
    • 한국음향학회지
    • /
    • 제15권6호
    • /
    • pp.12-15
    • /
    • 1996
  • 실제 환경에서 배열은 비정상적으로 동작하는 소자를 가질 확률이 높다. 결함 소자는 출력이 없거나 정상인 것에 비해 크게 감소된 이득을 갖는다. 이는 빔의 부엽 레벨을 높이고, 적응 빔 형성기에서 간섭 신호를 제거하지 못하도록 한다. 이 논문에서는 결함 소자들을 갖는 배열을 위한 빔 형성 방법을 제안하였다. 이상적인 경우 배열 출력 자료들로부터 계산된 자기 상관 행렬은 Toeplitz 행렬이다. 그러나 결함 소자를 갖는 배열로부터 게산된 자기 상관 행렬은 결함 행렬이다. 따라서 이 행렬의 대각항들을 평균하여 얻어진 값들로 새로운 자기 상관 행렬을 구성하고, 새로 구성된 자기 상관 행렬을 빔형성 방법에 적용한다. 제안된 방법의 성능을 고찰하기 위해 컴퓨터 시뮬레이션을 수행하였다. 그 결과 제안된 방법은 기존의 부분 처리 기법의 단점이었던 자유도 문제를 해결할 수 있었다.

  • PDF

기지국 안테나 배열을 이용한 FDD 방식의 무선통신 시스템에서 송신 빔 형성을 위한 주파수 변환 방식 (Frequency translation approach for transmission beamforming in FDD wireless communication systems with basestation arrays)

  • 오성근
    • 전자공학회논문지S
    • /
    • 제34S권5호
    • /
    • pp.1-14
    • /
    • 1997
  • We consider transmission beamforming techniques for frequency-division-duplex (FDD) wireless communication systems using adaptive arrays to improve the signal quality of the array transmission link. We develop a simple effective transmission beamforming technique based on an approximated frequency tranlsation (AFT) to derive the tranmsiion beamforming weights from the uplink channel vector. This technique exploits the invariance of the short-time averaged fast fading statistics to small frequency translations. A simple approximate relationship that relates the transmission channel vector to the reception channel vector is derived. We have developed its practical alternative in which the frequency translation of the channel vector is performed at the principal angle of arrival (AOA) of the u;link synthestic angular spectrum instead of the mean AOA. To analyze the performance of the proposed methods, we consider the power loss incurred by applying the estimated channel vector instead of the true downlink channel vector. The performance is analyzed as a function of the mean AOA, the angular spread, the number of elements, frequncy difference between the uplink and the downlink, and the angle distribution. Their performance is also compared with that of the direct weight reuse method and the AOA based methods.

  • PDF