• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.11
• /
• pp.9-21
• /
• 2009

This paper proposes the alternative observer and controller design scheme based on T-S fuzzy model. Nonlinear systems are represented by fuzzy models since fuzzy logic systems are universal approximators. In order to estimate the unmeasurable states of a given unknown nonlinear system, T-S fuzzy modeling method is applied to get the dynamics of an observation system. T-S fuzzy system uses the linear combination of the input state variables and the modeling applications of them to various kinds of nonlinear systems can be found. The proposed indirect adaptive fuzzy observer based on T-S fuzzy model can cope with not only unknown states but also unknown parameters. The proposed controller is based on a simple output feedback method. Therefore, it solves the singularity problem, without any additional algorithm, which occurs in the inverse dynamics based on the feedback linearization method. The adaptive fuzzy scheme estimates the parameters and the feedback gain comprising the fuzzy model representing the observation system. In the process of deriving adaptive law, the Lyapunov theory and Lipchitz condition are used. To show the performance of the proposed observer and controller, they are applied to an inverted pendulum on a cart.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.148-153
• /
• 1999

In this paper, it is proposed the adaptive-sliding mode control technique which is new approach to implement the robust control of industrial robot manipulator with external disturbances and parameter uncertainties. Over the past decade, the design of advanced control systems for industrial robotic manipulators has been a very active area of research and two major design categories have emerged. Sliding mode control is a well-known technique for robust control of uncertain nonlinear systems. The robustness of sliding model controllers can be shown in continuous time, but digital implementation may not preserve robustness properties because the sampling process limits the existence of a true sliding mode. Adaptive control algorithm is designed by using the principle of the model reference adaptive control method based upon the hyperstability theory. The proposed control scheme has a simple structure is computationally fast and does not require knowledge of the complex dynamic model or the parameter values of the manipulator or the payload. Simulation results how that the proposed method not only improves the performance of the system but also reduces the chattering problem of sliding mode control. Consequently, it is expected that the new adaptive sliding mode control algorithm will be suited for various practical applications of industrial robot control system.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.513-525
• /
• 1990

This paper presents Adaptive Robust Servocontrol(ARSC) scheme, which is an explicit(or indirect) pole-assignment adaptive algorithm with the property of "robustness". It guarantees asymptotic regulation and tracking in the presence of finite parameter perturbations of the unknown plant(or process) model. The controller structure is obtained by transforming a robust control theory into an adaptive control version. This controller structure is combined with the model estimation algorithm which includes a dead-zone for bounded noise. It is proved theoretically that this combination of control and identification is globally convergent and stable. It is also shown, through a real-time simulation study, that the desired closed-loop poles of the augmented system can be assigned directly, and that the adjustment mechanism of the scheme tunes the controller parameters according to the assigned closed-loop poles.oop poles.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.12
• /
• pp.1015-1023
• /
• 2001

error behaviour can be considered as a linear combination of low amplitude random noise and abrupt jumps. The reason of jump appearance can be explained by the semi-shading effects(buildings, trees), jamming, high dynamic of vehicle and so on. This study describes the stand-alone GPS error jump smoothing algorithm which is developed based on the scalar adaptive filter. The algorithm consists of the coarse jump smoothing and the fine jump smoothing. On the coarse smoothing step, GPS velocities or position differences are used as the measurement for the scalar adaptive filter. The purpose of adaptive filter is to smooth the jump errors. The coarse positions are detennined by the integration of smoothed velocities. On the fine smoothing step, the differences between GPS positions and the coarse positions are smoothed by another scalar adaptive filter. The reason of fine smoothing is based on the facts that smoothing accuracy depends on the variance ofusefuJ signa\. The coarse smoothing which deal with the difference of positions provides the rough error removing. So the coarse smoothed velocities can have much more low amplitude than the raw ones. The fine smoothing procedure provides high quality of filtering process. Simulation results show the efficiency of proposed scheme.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.6
• /
• pp.659-665
• /
• 2010

The finite element method(FEM) is proven to be an effective approximate method of structural analysis if proper element types and meshes are chosen, and recently, the method is often applied to solve complex dynamic and nonlinear problems. A properly chosen element type and mesh yields reliable results for dynamic finite element structural analysis. However, dynamic behavior of a structure may include unpredictably large strains in some parts of the structure, and using the initial mesh throughout the duration of a dynamic analysis may include some elements to go through strains beyond the elements' reliable limits. Thus, the finite element mesh for a dynamic analysis must be dynamically adaptive, and considering the rapid process of analysis in real time, the dynamically adaptive finite element mesh generating schemes must be computationally efficient. In this paper, a computationally efficient dynamically adaptive finite element mesh generation scheme for dynamic analyses of structures is described. The concept of representative strain value is used for error estimates and the refinements of meshes use combinations of the h-method(node movement) and the r-method(element division). The shape coefficient for element mesh is used to correct overly distorted elements. The validity of the scheme is shown through a cantilever beam example under a concentrated load with varying values. The example shows reasonable accuracy and efficient computing time. Furthermore, the study shows the potential for the scheme's effective use in complex structural dynamic problems such as those under seismic or erratic wind loads.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.1
• /
• pp.172-185
• /
• 2019

In this paper, we investigate the performance of the diffusion adaptation strategies for parameter estimation in wireless adaptive networks, where the nodes exchange information over noisy and fading wireless channels. This paper shows the differences between the effect of Rayleigh and Rician fading over wireless adaptive networks and proves that the Rician fading is a more practical model in such kinds of networks. Simulation results imply that the effect of Rayleigh fading is more degrading for the estimation process than Rician fading. Also, the simulation results show the performance of adapt then combine (ATC) diffusion algorithm is better than the combine then adapt (CTA) algorithm by merely considering noise in wireless channels. While the performance of CTA prevails ATC over the wireless adaptive network in the presence of noise plus channel fading.

• Journal of Distribution Science
• /
• v.20 no.9
• /
• pp.109-126
• /
• 2022

Purpose: The role of salespersons' emotions in effective selling behavior garners attention among scholars and practitioners. Previous studies have investigated the effects of emotional intelligence and emotional labor on sales success separately. However, to understand the whole process, the relationships among salespersons' cognition, emotions, and behaviors should be considered simultaneously. Accordingly, we uniquely examined how salespersons' emotional intelligence (emotional antecedent) and customer orientation (cognitive antecedent) influence their emotional labor (deep acting vs. surface acting), adaptive selling behavior, and the selling results in the retail environment. Research design, data, and methodology: To improve methodological rigor, we used the dyadic approach. We measured 182 salespersons' emotional intelligence, customer orientation, and emotional labor, and 364 customers assessed the salespersons' adaptive selling behavior and selling results in the insurance and duty-free department retailing sectors. Result: The findings suggest that salespersons' customer orientation and emotional intelligence relate to deep-acting of emotional labor, affecting their adaptive selling behavior and relationship quality with customers. Conclusions: As for managerial implications, sales managers may well consider emotional intelligence levels when selecting salespersons in the retail industry. Additionally, practical training programs are required to cultivate customer orientation, emotional intelligence, and deep acting while performing emotional labor.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.84-89
• /
• 2003

Fuzzy controller is one of the succeed controller used in the process control in case of model uncertainties. But it my be difficult to fuzzy controller to articulate the accumulated knowledge to encompass all circumstance. Hence, it is essential to provide a tuning capability. There are many parameters in fuzzy controller can be adapted, scale factor tuning of normalized fuzzy controller is one of the adaptation parameter. Two adaptation methods are implemented in this work on an experimental thermal process, which simulate heating process in liquefied petroleum gases (LPG) recovery process in one of petrochemical industries: Gradient decent (GD) adaptation method; supervisory fuzzy controller. A comparison between the two methods is discussed.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.10a
• /
• pp.54-59
• /
• 1998

In order to minimize straightness error of deflected shafts, a automatically bending process control system is designed, fabricated, and studied. The multi-step straightening process and the three-point bending process are developed for the geometric adaptive straightness control. Load-deflection relationship, on-line identification of variations of material properties, on-line springback prediction, and studied for the three-point bending processes. Selection of a loading point supporting condition are derved form fuzzy inference and fuzzy self-learning method in the multi-step straighternign process. Automatic straightening machine is fabricated by using the develped ideas. Validity of the proposed system si verified through experiments.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.7
• /
• pp.1223-1233
• /
• 1992

Chemical and mechanical properties of workpieces and tools are important factors for selecting machining parameters in machining process planning. As there is no universal rule representing the machinability defined by metal removal rate, the selection of machining parameters still requires experience-oriented methods. In this paper, a new approach is presented to develop mathematical models for generating optimum machinability in turning processes based on chemical and mechanical properties of workpieces. Neural-Network methodology is introduced to identify mathematical models for machinability. It is confirmed by simulations that the proposed methodology can be used for developing numerical controllers with adaptive control performance.