• 정보처리학회논문지A
• /
• 제15A권3호
• /
• pp.151-154
• /
• 2008

서비스 이동과 자원 상태 변화 등 실행 환경 변화가 빈번히 발생하는 그리드 컴퓨팅 환경은 다양한 응용 프로그램 작업 환경을 지원하고 사용자에게 끊임없는 작업 환경을 보장하기 위하여 고가용성을 지원하는 미들웨어가 필수적으로 필요하다. 기존의 분산 환경 미들웨어 역시 고가용성 지원 서비스가 일부 연구자에 의해 진행되고 있으나 공개표준은 아니며 다양한 그리드 서비스에 대한 고려가 없다. 본 논문에서는 환경에 따라 적응하는 서비스 미들웨어 런타임 서비스 관리 시스템을 통해 자율적으로 작업 환경을 재구성하도록 하여 미들웨어의 가용성을 증대시키고 안정적으로 서비스의 계속성과 데이터 및 자료의 일관성을 보장하는 방법을 제시하고 프로토타입 Wapee(Web-Service based Application Execution Environment)를 통해 실제 환경에서 적용 가능성을 확인한다.

• 대한기계학회논문집
• /
• 제17권1호
• /
• pp.182-189
• /
• 1993

본 연구에서는 한곳에 적응효과가 중복되는 것을 피하고 해의 변화율이 상대 적으로 큰 곳에 대해 대등한 격자 적응효과를 주는 방법을 연구하였다. 전 유동장에 서 해의 변화율을 계산하여 하한값(threshold) 보다 큰 값을 갖는 cell에 대해 같은 크기의 가중함수(weight function) 값을 갖게 한다. 하한값(threshold)은 전체 cell 수에 대해 상위의 변화율을 갖는 cell의 백분율(percentage)로부터 구한다. 이 방법 은 하한값을 직접 대입해야 한다는 단점은 있으나 변황율이 상대적으로 큰 영역에 대 해 고른 격자 적응 효과를 줌으로 해서 격자 적응의 회수를 줄일 수 있으며 해의 발달 에 긍정적인 격자를 생성할 수 있다.

• 전력전자학회논문지
• /
• 제17권5호
• /
• pp.409-415
• /
• 2012

This paper presents a new software-based on-line dead-time compensation technique for a single-phase grid-connected photovoltaic (PV) inverter system. To prevent a short circuit in the inverter arms, a switching delay time must be inserted in the pulse width modulation (PWM) signals. This causes the dead-time effect, which degrades the system performance around zero-crossing point of the output current. To reduce the dead-time effect around the zero-crossing point of grid current, a harmonic mitigation of grid current is used as an additional part of the synchronous frame current control scheme. This additional task mitigates the harmonic components caused by the dead-time from the grid current. Simulation and experimental results are shown to verify the effectiveness of the proposed dead-time compensation method in the single-phase grid-connected inverter system.

• ETRI Journal
• /
• 제42권4호
• /
• pp.585-595
• /
• 2020

Integration of multiple communication technologies in a smart grid (SG) enables employing cognitive radio (CR) technology for improving reliability and security with low latency by adaptively and effectively allocating spectral resources. The versatile features of the CR enable the smart meter to select either the unlicensed or the licensed band for transmitting data to the utility company, thus reducing communication outage. Demand response management is regarded as the control unit of the SG that balances the load by regulating the real-time price that benefits both the utility company and consumers. In this study, joint allocation of the transmission power to the smart meter and consumer's demand is formulated as a two stage multi-armed bandit game in which the players select their optimal strategies noncooperatively without having any prior information about the media. Furthermore, based on historical rewards of the player, a real-time pricing adaptation method is proposed. The latter is validated through numerical results.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 춘계 학술대회논문집
• /
• pp.105-110
• /
• 2001

An Eulerian-Lagrangian method, so called immersed boundary method, is used for analysing viscous flow around arbitrary bodies, where governing equations are discretized on a regular grid by using a finite volume method. To improve the accuracy of flow near body boundaries, a second-order accurate interpolation scheme is used and a level-set based grid deformation method is presented to construct the adaptive grids around body boundaries. The present scheme is used to simulate steady flow around a semicircular cylinder mounted on the bottom of flow domain and calculated results are validated by results of a body fitted grid method. Finally, present method is applied to a complex flow around multi body and the usefulness is checked by investigating calculated results.

• 대한기계학회논문집
• /
• 제19권8호
• /
• pp.1982-1988
• /
• 1995

Methane/Air premixed flames are studied numerically, using a detailed chemical model, to investigate the flame strech effects on the extinction in a counterflow. The finite difference method, time integration and modified Newton iteration are used, and adaptive grid technique and grid smoothing have been employed to adjust the grid system according to the spatial steepness of the solution profiles. Results show that the flame stretch, or the conventional nondimensionalized stretch having the tangential flow characteristics of the stretched flame alone cannot adequately describes the extinction phenomena. On the other hand, the local flame stretch having both the normal and tangential flow characteristics of the stretched flame can give a proper explanation to the extinction of the symmetric planar premixed flames stabilized in a counter flow. The extinction condition were found to be a constant local stretch regardless of the equivalence ratio.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권3호
• /
• pp.1071-1090
• /
• 2016

Most of scheduling methods in the Grid only consider one special attribute of the resource or one aspect of QoS (Quality of Service) of the job. In this paper, we focus on the problem that how to consider two aspects simultaneously. Based on the requirements of the jobs and the attributes of the resources, jobs are categorized into three kinds: CPU-overload, memory-overload, and bandwidth-overload jobs. One job may belong to different kinds according to different attributes. We schedule the jobs in different categories in different orders, and then propose a scheduling method-MTS (multiple attributes scheduling method) to schedule Grid resources. Based on the comparisons between our method, Min-min, ASJS (Adaptive Scoring Job Scheduling), and MRS (Multi-dimensional Scheduling) show: (1) MTS reduces the execution time more than 15% to other methods, (2) MTS improves the number of the finished jobs before the deadlines of the jobs, and (3) MTS enhances the file size of transmitted files (input files and output files) and improves the number of the instructions of the finished jobs.

• 대한안전경영과학회지
• /
• 제15권1호
• /
• pp.77-85
• /
• 2013

In the location science, environmental effect becomes a new main consideration for site selection. For the unwanted facility location selection, decision makers should consider the cost of resolving the environmental conflict. We introduced the negative influence cost for the facility which was inversely proportional to distance between the facility and residents. An unwanted facility location problem was suggested to minimize the sum of the negative influence cost and the transportation cost. The objective cost function was analyzed as nonlinear type and was neither convex nor concave. Three GRASP (Greedy Randomized adaptive Search Procedure) methods as like Random_GRASP, Epsilon_GRASP and GRID_GRASP were developed to solve the unwanted facility location problem. The Newton's method for nonlinear optimization problem was used for local search in GRASP. Experimental results showed that quality of solution of the GRID_GRASP was better than those of Random_GRASP and Epsilon_GRASP. The calculation time of Random_GRASP and Epsilon_GRASP were faster than that of Grid_GRASP.

• 한국시뮬레이션학회논문지
• /
• 제12권4호
• /
• pp.51-59
• /
• 2003

Real-Time applications on Grid environment have several problems in terms of resource management addressed as follows; (1) dynamic resource allocation to provide QoS objectives, (2) heterogeneous resources that is different scale, or capacity in same unit, and (3) resource availability, and resource needs. This paper describes the techniques of resource manager (RM) handling above problems to support QoS of dynamic real-time applications on Grid. The contributions of this paper to solve problems are as follows: unification of dynamic resource requirements among heterogeneous hosts, control of resources in heterogeneous environments, and dynamic load balancing/sharing. Our heuristic allocation scheme works not only 257% better than random, 142% better than round robin, and 36.4% better than least load in QoS sensitivity, but also 38.6% better than random, 28.5% better than round robin, and 31.6% better than least load in QoS.

• 한국측량학회지
• /
• 제4권1호
• /
• pp.72-81
• /
• 1986

본 연구에서는 등고선의 곡률변화를 고려하여, 작도에 필요한 등고선점의 수를 결정하는 방법으로써 등고선도를 작성하고 실험 및 해석을 하였다. 결과로서는, 축척 1 : 2.500 수치등고선도에서 적당한 격자간격은 10∼20m이고 지형의 평균경사가 크면 등고선 작도에 알맞는 격자간격이 작음을 제시하고 있다.