• 한국통신학회논문지
• /
• 제22권1호
• /
• pp.40-52
• /
• 1997

OFDM을 사용하는 지상 중계 시스템은 단일 반송파를 사용하는 중계 시스템보다 고출력 증폭기에서 발생하는 비선형 왜곡에 매우 민감한 것으로 알려져 있다. 본 논문에서는 이러한 OFDM 시스템의 고출력 증폭기에서 발생하는 비선형 왜곡의 영향을 보상할 수 있는 적응 사전 보상기를 제안한다. 제안된 사전 보상기는 메모리(RAM)에 의해 구현되는 보상 테이블과 "broadcasting" 기법을 사용하여 효율적으로 보상 테이블의 값을 갱신하는 적응 알고리듬으로 구성되어 있다. 제안된 훈련 신호를 사용하여 제안된 적응 사전 보상기의 수렴속도를 향상시킬 수 있음을 부이고, 고출력 증폭기의 비선형 왜곡 영향을 받는 OFDM 시스템의 성능을 향상시킬 수 있음을 컴퓨터 모의 실험을 통해서 확인한다. 통해서 확인한다.

• 한국음향학회지
• /
• 제24권5호
• /
• pp.238-247
• /
• 2005

본 논문에서는 디지털 보청기의 보상필터와 적응 궤환제거기의 부밴드 설계기법을 다룬다 감음 신경성 난청은 주파수 대역에서 비선형 특성을 보이는 가청 한계값 (hearing thresholds)을 가지며 시변하는 궤환경로에 의해 보상이 어렵다. 그러므로 디지틸 보청기는 주파수 대역별 비선형적 이득조정이 가능하며 반향을 빠르게 제거할 수 있는 보상기를 필요로 한다. 제안한 디지털 보청기에서 보상필터는 부밴드 구조에서 적응 시스템 식별기법을 이용하여 설계되며 적응 궤환제거기는 부밴드 인접투사 알고리즘을 이용하여 설계된다. 설계된 보상필터는 비선형 이득을 각 부밴드에서 조정할 수 있으므로 보다 정확한 이득보상이 가능하다. 그리고 부밴드 적응필터를 사용하는 궤환제거기는 빠른 수렴속도를 가진다. 설계된 보상필터는 주파수 대역별로 비선형적 이득보상이 가능하다. 그리고 적응 궤환제거기는 원치 않은 반향을 빠르게 제거할 수 있다. 제안한 보상필터의 성능을 컴퓨터 시뮬레이션을 통해 이전 방법의 성능과 비교하여 입증한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권4호
• /
• pp.641-647
• /
• 2004

By most sensorless speed control schemes for induction motor. the control performances in high speed range are good, but it is difficult to obtain satisfactory results in low speed region. This paper proposes a new method controlling the low and the high speed regions separately to attain the stable operation in the overall range. The current error compensation method, in which the controlled stator voltage is applied to the induction motor so that the error between stator currents of the numerical model and the actual motor can be forced to decay to zero as time proceeds. is used in the low speed region In the high speed region. the method with adaptive observer is utilized. This control strategy contains an adaptive state observer for flux estimation. The rotor speed can be calculated from the rotor flux and the motor currents. The experimental results indicate good speed and load responses from the very low speed range to the high, and also show accurate speed changing performance between the low and the high speed range.

• Journal of Power Electronics
• /
• 제2권1호
• /
• pp.1-10
• /
• 2002

An advanced active power filter for the compensation of instantaneous harmonic current components in nonlinear current load is presented in this paper. A novel signal processing technique using an adaptive neural network algorithm is applied for the detection of harmonic components generated by three-phase nonlinear current loads and this method can efficiently determine the instantaneous harmonic components in real time. The control strategy of the switching signals to compensate current harmonics of the three-phase inverter is also discussed and its switching signals are generated with the space voltage vector modulation scheme. The validity of this active filtering processing system to compensate current harmonics is substantiated on the basis of simulation results.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.184.1-184.1
• /
• 2005

• Journal of Welding and Joining
• /
• 제33권2호
• /
• pp.47-55
• /
• 2015

With using adaptive control of the resistance spot welding machine, the advantage on electrode life time for galvanized steels has been addressed. This study was aimed to evaluate the electrode life time of galvanized steels with applying the constant current control and the adaptive control resistance spot welding process for a comparison purpose. The growth in diameter of electrode face was similar for both the constant current and the adaptive control up to 2000 welds. The button diameter was decreased with weld numbers, however, sudden increase in button diameter with use of the adaptive control after 1500 welds was observed. The peak load was continuously decreased with increasing number of welds for both the constant current and the adaptive control. The current compensation during a weld was observed with using the adaptive control after 1800 welds since the ${\beta}$-peak on dynamic resistance curve was detected at later weld time. The current compensation with adaptive control during resistance spot welding enhanced the nugget diameter at the faying interface of steel sheets and improved the penetration to thinner steel sheet.

• 한국정밀공학회지
• /
• 제20권11호
• /
• pp.100-107
• /
• 2003

This paper represents a disturbance compensation control for attenuating disturbance responses. In the consideration of the requirements on the model accuracy in the model based compensator designs, an experimental feed forward compensator design based on adaptive estimation by Filtered-x least mean square (FXLMS) algorithm is proposed. The convergence properties of the FXLMS algorithm are discussed and its conditions for the asymptotic convergence are derived theoretically. The effectiveness of the proposed method and the theoretical proof are verified by computer simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.283-284
• /
• 2007

In this paper we introduce a compensation of nonlinearity Heterodyne laser interferometer. The Laser Interferometer is used for length measurement in various industries. However, it has nonlinearity error caused by the imperfect optical equipment. This acts as an obstacle in the measurement improvement. We propose an adaptive error compensation using least mean square(LMS) to improve precision.

• 한국광학회지
• /
• 제27권3호
• /
• pp.106-113
• /
• 2016

본 논문에서는 37채널을 갖는 적응광학계용 SiC(Silicon Carbide) 변형거울의 파면 보상 성능 검증에 관한 내용을 다룬다. 컴퓨터 시뮬레이션을 통해 SiC 변형거울의 파면 보상 성능을 예측하였고, 실제 closed-loop 적응광학계를 구성하여 파면 보상 성능을 확인 하였다. Closed-loop 적응광학계는 광원, 위상판, SiC 변형거울, 고속 샥-하트만 센서 그리고 제어용 컴퓨터로 구성되어있다. 회전하는 위상판에 의해 왜곡된 파면을 샥-하트만 센서로 측정하고, SiC 변형거울을 이용하여 왜곡된 파면을 보상해주는 시스템이다. 결과적으로 closed-loop 적응광학계에서 500 Hz의 속도로 PV(Peak-to-Valley) $0.3{\mu}m{\sim}0.9{\mu}m$, RMS(Root-Mean-Square) $0.06{\mu}m{\sim}0.25{\mu}m$의 왜곡된 파면을 PV $0.1{\mu}m$, RMS $0.03{\mu}m$이하로 보상시킬 수 있었다.

• 음성과학
• /
• 제11권2호
• /
• pp.227-235
• /
• 2004

In this paper, we proposed a new practical implementation method of the lattice transversal joint (LTJ) adaptive filter using speech codec's information. And it was applied to the adaptive echo cancellation problem to verify the efficiency of the proposed method. Realtime implementation of the LTJ adaptive filter is very difficult due to high computational complexity for the filter coefficients compensation. However, in case of using speech codec, complexity can be reduced since linear predictive coding (LPC) coefficients are updated each frame or sub-frame instead of every sample. Furthermore, LPC coefficients can be acquired from speech decoder and transformed to the reflection coefficients. Therefore, the computational complexity for updates of the reflection coefficients can be reduced. The effectiveness of the proposed LTJ adaptive filter was verified by the experiments about convergence and tracking performance of the adaptive echo canceller.