• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.2
• /
• pp.96-103
• /
• 2005

The early detection of the bearing defects in rotating machinery is very important since the critical failure of bearing causes a machinery shutdown. However it is not easy to detect the vibration signal caused by the initial defects of bearing because of the high level of random noise. A signal processing technique, called the adaptive line enhancer(ALE) as one of adaptive filter, is used in this study. This technique is to eliminate random noise with little a prior knowledge of the noise and signal characteristics. Also we propose the optimal methods fir selecting the three main ALE parameters such as correlation length filter order and adaptation constant. Vibration signals f3r three abnormal bearings, including inner and outer raceways and ball defects, were acquired by Anderon(angular derivative of radius on) meter. The experimental results showed that ALE is very useful f3r detecting the bearing defective signals masked by random noise.

• Interdisciplinary Bio Central
• /
• v.6 no.1
• /
• pp.1.1-1.6
• /
• 2014

A growing body of evidence shows that most psychological traits are polygenic, that is they involve the action of many genes with small effects. However, the study of selection has disproportionately been on one or a few genes and their associated sweep signals (rapid and large changes in frequency). If our goal is to study the evolution of psychological variables, such as intelligence, we need a model that explains the evolution of phenotypes governed by many common genetic variants. This study illustrates simple statistical tools to detect signals of recent polygenic selection: a) ANOVA can be used to reveal significant deviation from random distribution of allele frequencies across racial groups. b) Principal component analysis can be used as a tool for finding a factor that represents the strength of recent selection on a phenotype and the underlying genetic variation. c) Method of correlated vectors: the correlation between genetic frequencies and the average phenotypes of different populations is computed; then, the resulting correlation coefficients are correlated with the corresponding alleles' genome-wide significance. This provides a measure of how selection acted on genes with higher signal to noise ratio. Another related test is that alleles with large frequency differences between populations should have a higher genome-wide significance value than alleles with small frequency differences. This paper fruitfully employs these tools and shows that common genetic variants exhibit subtle frequency shifts and that these shifts predict phenotypic differences across populations.

• Research in Community and Public Health Nursing
• /
• v.16 no.3
• /
• pp.249-259
• /
• 2005

Purpose: The purpose of this study was to understand the coping process that family caregivers experience during the process of care, to grasp coping behaviors used to solve problems and, finally, to develop a substantive theory by analyzing the coping process. Method: The methodology of collecting and analyzing data used in this study followed the ground theory of Strauss and Corbin(1998). Data were collected through in-depth interviews with open-ended and descriptive questions about the subjects' coping experiences, which were audio-taped and transcribed. The survey was conducted between February 2000 and February 2001. The subjects of this study were 17 women. Result: The result of the study is as follows. The coping process of family caregivers while taking care of the demented elderly was found to have six stages: problem recognition: undertaking care: struggling: mental control: burden mediation; and acceptance. These stages proceed with reciprocal action and in cycle. Conclusion: The result of this study is helpful for developing effective and individual nursing strategies suitable for each coping stage. It is necessary to develop an assessment tool that can judge caregivers' coping stage based on the result of this study. Moreover, we need continuous study to practice nursing mediation and to analyze the change about nursing effect and family members' adaptation.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.4
• /
• pp.373-379
• /
• 2012

Disruptions in manufacturing systems caused by system changes and disturbances such as the tool wear, machine breakdown, malfunction of transporter, and so on, reduce the productivity and the increase of downtime and manufacturing cost. In order to cope with these challenges, a new method to build an intelligent manufacturing system with biological principles, namely an ant colony inspired manufacturing system, is presented. In the developed system, the manufacturing system is considered as a swarm of cognitive agents where work-pieces, machines and transporters are controlled by the corresponding cognitive agent. The system reacts to disturbances autonomously based on the algorithm of each autonomous entity or the cooperation with them. To develop the ant colony inspired manufacturing system, the disturbances happened in the machining shop of a transmission case were analyzed to classify them and to find out the corresponding management methods. The system architecture with the autonomous characteristics was generated with the cognitive agent and the ant colony technology. A test bed was implemented to prove the functionality of the developed system.

• Journal of information and communication convergence engineering
• /
• v.9 no.2
• /
• pp.235-243
• /
• 2011

With the recent trends and the adaptation of further advancement in personal healthcare system leads to develop some application which can work independent and user can operate that application without much interference of physician or any specialist user. To meet these needs, this paper proposes and implements a progressive architecture for the personal healthcare information system. This new architecture will not only play the role of middleware but also provide a analysis tool to process that different sensor data which is collected from different sensors implemented on patient body and environment. After collecting that data, with the help of various developed applications this data can be convert into useful information which will be stored in application server for further use and research. These features can be enabled by simple and effortless interactions of normal users and act autonomously to support their activities. This proposed personal healthcare architecture will also provide analysis report to the doctors and patient or various users for further instructions. The analysis report consists of healthcare data analysis results and history of patients. We are considering healthcare data like ECG, which is an important aspect for basic healthcare need.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.7
• /
• pp.672-678
• /
• 2008

This paper proposes a new rehabilitation robot with upper and lower limb connections for gait training. As humans change a walking speed, their nervous systems adapt muscle activation patterns to modify arm swing for the appropriate frequency. By analyzing this property, we can find a relation between arm swinging and lower limb motions. Thus, the lower limb motion can be controlled by the arm swing for walking speed adaptation according to a patent's intension. This paper deals with the design aspects of the suggested gait rehabilitation robot, including a trajectory planning and a control strategy. The suggested robot is mainly composed of upper limb and lower limb devices, a body support system. The lower limb device consists of a slider device and two 2-dof footpads to allow walking training at uneven and various terrains. The upper limb device consists of an arm swing handle and switches to use as a user input device for walking. The body support system will partially support a patient's weight to allow the upper limb motions. Finally, we showed simulation results for the designed trajectory and controller using a dynamic simulation tool.

• Physical Therapy Korea
• /
• v.25 no.1
• /
• pp.53-61
• /
• 2018

Background: The process of language translation, adaptation, and cross-cultural validation of tools for use in multiple countries requires the adoption of well-established, comprehensive, and rigorous methodological approaches. Back translation, which is the most recommended method, permits the detection of errors in the translation and the identification of words or phrases that cannot be accurately or literally translated. Objects: The aim of this study was to verify the content validity of a Korean version of a Balance Evaluation Systems test (BESTest) by using a back-translation method. Methods: This research was conducted in six steps: 1) translation of the BESTest into Korean, 2) evaluation of the translation conformity of Korean-translated BESTest, 3) evaluation of the degree of translation comprehension, 4) back translation of Korean BESTest, 5) evaluation of the technical and conceptual equivalence, and 6) completion of the Korean version of BESTest by the translation verification committee. Results: In this study, Korean version of the BESTest achieved a rating of more than 3 (moderate) for translation comprehension, and technical equivalence and conceptual equivalence of back translation were evaluated as 3 (moderate) or more. Conclusion: The Korean version of the BESTest has proven content validity and is an appropriate tool to measure balance function.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.13 no.4
• /
• pp.41-50
• /
• 2013

One of the important point in the development of urban fishing villages is to create various alternatives providing appropriate environment of fishing villages by keeping the characteristics of each fishing village. The purpose of this study is to suggest an urban-planning alternation to main fishing villages in Busan city by adaptation of the framework analysis, by adapting differentiated strategy considering the characteristics of each fishing village and by having similarities of development direction the whole city. At the same time this study is to propose against imprudent development of certain fishing villages or staying physical issues of existing plans about fishing villages. So this study is willing to visualize the frame of village and suggest the development direction after analyzing the 6 fishing villages(Songjeong village, Millak village, Daebyeon village, Gongsu village, Duho village, Dongam village) representing Busan city by using the five development types extracted from the type of cultural city. In addition, this study is used the framework analysis as the visual tool of potential elements and development direction in fishing villages by making frame of the most revealing cultural or environmental elements.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.7
• /
• pp.1401-1407
• /
• 2002

This paper represents an investigation of the vehicle-to-vehicle distance control system using Hardware-in-the-Loop Simulation(HiLS). Control logic is primarily developed and tested with a specially equipped test vehicle. Establishment of an efficient and low cost development tool is a very important issue, and test vehicle approach is costly and time consuming. HiLS method is useful in the investigation of driver assistance and active safety systems. The HiLS system consists of a stepper motor for throttle control, a hydraulic brake system with an electronic vacuum booster, an electronic controller unit, a data logging computer which are used to save vehicle states and signals of actuator through a CAN and a simulation computer using mathematical vehicle model. Adaptation of a CAN instead of RS-232 Serial Interface for communication is a trend in the automotive industry. Since this environment is the same as a test vehicle, a control logic verified in laboratory can be easily transferred to a test vehicle.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.1
• /
• pp.77-91
• /
• 2004

Integrating computer-aided design with computer-aided fabrication and construction will fundamentally redefine the relationship between design and construction. Rapid prototyping(RP) is evaluated as one of the integration method available but it has been regarded as very expensive and complex design evaluation tool and is only suitable for large mechanical design shops in automobile and aerospace industry. However current status of rapid prototyping is changing since the new generation of RP equipment, less expensive and more user-friendlier, now can be installed and use in design firms. Simultaneously increasing use of 3D CAAD software is also helping to use rapid prototyping widely. It is crucial to acknowledge rapid prototyping technologies are not only for avant-garde architect such as Frank O. Gehry but ordinary 90% architects, who can have benefit from fast and cost-effective technology. With its fast development and adaptation in architectural industry, it is quite necessary to include rapid prototyping education in regular CAAD courses either undergraduate or graduate level.