• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10c
• /
• pp.674-676
• /
• 2000

인터넷과 같은 이질적인 네트워크환경에서 대용량의 비디오 데이터를 실시간으로 전송하기 위해서 계층적 코딩기법에 관한 연구가 진행되고 있으며, MPEG-2 비디오에서도 Scalability를 제공하고 있다. 하지만 이러한 계층적 코딩기법을 사용한다 하더라도 기본계층의 데이터량이 크기 때문에 실시간 서비스를 위해서는 상당량의 네트워크 자원을 필요로 하게 된다. 이에 네트워크 대여폭 변화에 능동적으로 적응하면서 네트워크 자원을 보다 효율적으로 사용할 수 있는 새로운 계층적 코딩기법과 전송 기법을 제안한다. 제안된 기법은 MPEG 비디오를 픽처층을 이용하여 공간적 계층적 코딩 후 다시 DCT블록에 대한 공간적 계층적 코딩을 수행하여 15개의 레이어로 분할하게 된다. 이렇게 분할된 레이어는 네트워크의 상태에 따라 선별적으로 전송되게 된다.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.758-760
• /
• 1995

The purpose of noise cancellation is to estimating signals corrupted by additive noise or interference. In this paper, an adaptive noise canceller is built from a Walsh filter with a new adaptive algorithm. The Walsh filter consists of a Walsh function. Since the Walsh functions are either even or odd functions, the covariance matrix in the tap gain adjustment algorithm can be reduced to a simple form. In this paper, minimization of the mean squre error is accomplished by a proposed adaptive algorithm. The conventional adaptation techniques use a fixed time constant convergence factor by trial and error methods. In this paper, a convergence factor is obtained that is tailored for each adaptive filter coefficient and is updated at each block iteration.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.6
• /
• pp.691-698
• /
• 1998

This study investigated the clothing constructional characteristics of contemporary folk Jogori design retailed at the market. This study focussed on comparison of style variation between contemporary Jogori and traditional Jogori. The data were collected from five top contemporary folk dress makers's 997-1998 fall-winter collection. The results of this study were as following. 1) The traditional folk clothing constructional elements remained most among the con- temporary Jogori design were center back seam(Deung-Sol) and attached front bodice extensi on(Sup). Neckline shaping(Geet) and neckline binding(Dong-Jeong) were also observed frequently. 2) The most obvious changes from the traditional Jogori design were elimination of the ribbon fastener in front, adaptation of various neckline shaping used in the Yi dynasty, and lengthened garment length. 3) The western garment construction techniques applied to the contemporary Jogori design were use o( pocket and button closure. The center front extension was replaced with attached front bodice extension(Sup) for a few Jogori design.

• Korean Journal of Remote Sensing
• /
• v.22 no.5
• /
• pp.351-356
• /
• 2006

Based on current practical needs for geo-spatial information on mobile platform, the main theme of this study is a design and implementation of dynamic 3D terrain rendering system using spaceborne imagery, as a kind of texture image for photo-realistic 3D scene generation on mobile environment. Image processing and 3D graphic techniques and algorithms, such as TIN-based vertex generation with regular spacing elevation data for generating 3D terrain surface, image tiling and image-vertex texturing in order to resolve limited resource of mobile devices, were applied and implemented by using graphic pipeline of OpenGL|ES (Embedded System) API. Through this implementation and its tested results with actual data sets of DEM and satellite imagery, we demonstrated the realizable possibility and adaptation of complex typed and large sized 3D geo-spatial information in mobile devices. This prototype system can be used to mobile 3D applications with DEM and satellite imagery in near future.

• International journal of advanced smart convergence
• /
• v.8 no.3
• /
• pp.61-68
• /
• 2019

Spatial modulation (SM) is the first proposed space modulation technique. By further utilizing the quadrature spatial dimension, quadrature spatial modulation (QSM) has been developed as an amendment to SM system to enhance the overall spectral efficiency. Both techniques are capable of entirely eliminating interchannel interference (ICI) at the receiver. In this paper, we propose a simple adaptive hybrid switching transmission scheme to obtain better system performance than SM and QSM systems under a fixed transmission date rate. The presented modulator selection criterion for switching between spatial modulator and quadrature spatial modulator is based on the larger received minimum distance of spatial modulator and quadrature spatial modulator to exploit the spatial channel freedom. It is shown through Monte Carlo simulations that the proposed hybrid SM and QSM switching system yields lower error performance than the conventional SM and QSM systems under the same fixed data rate and thus can provide signal to noise ratio (SNR) gain.

• Geomechanics and Engineering
• /
• v.37 no.3
• /
• pp.263-277
• /
• 2024

Artificial Neural Networks (ANNs) are artificial learning algorithms that provide successful results in solving many machine learning problems such as classification, prediction, object detection, object segmentation, image and video classification. There is an increasing number of studies that use ANNs as a prediction tool in soil classification. The aim of this research was to understand the role of hyperparameter optimization in enhancing the accuracy of ANNs for soil type classification. The research results has shown that the hyperparameter optimization and hyperparamter optimized ANNs can be utilized as an efficient mechanism for increasing the estimation accuracy for this problem. It is observed that the developed hyperparameter tool (HyperNetExplorer) that is utilizing the Covariance Matrix Adaptation Evolution Strategy (CMAES), Genetic Algorithm (GA) and Jaya Algorithm (JA) optimization techniques can be successfully used for the discovery of hyperparameter optimized ANNs, which can accomplish soil classification with 100% accuracy.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2024.05a
• /
• pp.600-601
• /
• 2024

본 논문은 RAG(Retrieval-Augmented Generation) End2End의 리소스(Resource) 과부하 문제를 해결하는 동시에 모델 성능을 향상 시키기 위해 PEFT(Parameters-Efficient Fine-Tuning)기술인 LoRA(Low Rank Adaptation)적용에 관한 연구이다. 본 논문에서는 RAG End2End 모델의 파라미터 값과 개수를 유지하면서, LRM(Low Rank Matrices)을 이용하여 추가적인 파라미터만을 미세 조정하는 방식으로, 전반적인 모델의 효율성을 극대화하는 방안을 제시하였다. 본 논문에서 다양한 도메인에 데이터 셋에 대한 제안 방식의 성능을 검증하고자 Conversation, Covid-19, News 데이터 셋을 사용하였다. 실험결과, 훈련에 필요한 파라미터의 크기가 약 6.4억개에서 180만개로 감소하였고, EM(Exact Match)점수가 유사하거나 향상되었다. 이는 LoRA를 통한 접근 법이 RAG End2End 모델의 효율성을 개선할 수 있는 효과적인 전략임을 증명하였다.

• The korean journal of orthodontics
• /
• v.48 no.4
• /
• pp.236-244
• /
• 2018

Objective: The aim of this study is to compare the adaptation of a straight wire between brackets positioned at the mid-lingual surface and those placed gingivally by using a three-dimensional simulation software. Methods: This cross-sectional study was performed using OrthoAid, an in-house software. The subjects were 36 adolescents with normal Class I occlusion. For each dental cast, two bracket positioning approaches, namely the middle and gingival, were examined. In the middle group, the reference points were placed on the mid-lingual surface of each tooth, while in the gingival group, the reference points were positioned lingually on the anterior teeth. A 4th degree polynomial was adopted, and the in-plane and off-plane root mean squares (RMSs) of the distances between the reference points and the fitted polynomial curve were calculated using the software. Statistical analysis was performed using the paired-samples t-test (${\alpha}=0.05$). Results: The mean in-plane RMS of the polynomial curve to the bracket distance in the gingival group was significantly lower than that in the middle group (p < 0.001). The off-plane RMS was higher in the gingivally positioned brackets in the maxilla than in the middle group (p < 0.001). However, the off-plane RMS in mandible was not statistically significantly different between the two groups (p = 0.274). Conclusions: The results demonstrated that the gingival placement of lingual brackets on the anterior teeth could decrease the distance between a tooth and the straight wire.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.1
• /
• pp.31-38
• /
• 2011

With the increasing demand for high-speed transmission systems, adaptive equalizers have been widely used in receivers to overcome the limited bandwidth of channels. In order to reduce the cost for testing high-speed receiver chips, on-chip eye-opening monitoring (EOM) technique which measures the eye-opening of data waveform inside the chip can be employed. In this paper, a 10-Gb/s adaptive 2-tap look-ahead decision feedback equalizer (DFE) with EOM function is proposed. The proposed EOM circuit can be applied to look-ahead DFEs while existing EOM techniques cannot. The magnitudes of the post-cursors are measured by monitoring the eye of received signal, and coefficients of DFE are calculated using them by proposed adaptation algorithm. The circuit designed in 90nm CMOS technology and the algorithm are verified with post-layout simulation. The DFE core occupies $110{\times}95{\mu}m^2$ and consumes 11mW in 1.2V supply voltage.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.5
• /
• pp.358-363
• /
• 2017

PURPOSE. The purpose of this study was to evaluate the reliability of computer-aided replica technique (CART) by calculating its agreement with the replica technique (RT), using statistical agreement analysis. MATERIALS AND METHODS. A prepared metal die and a metal crown were fabricated. The gap between the restoration and abutment was replicated using silicone indicator paste (n = 25). Gap measurements differed in the control (RT) and experimental (CART) groups. In the RT group, the silicone replica was manually sectioned, and the marginal and occlusal gaps were measured using a microscope. In the CART group, the gap was digitized using optical scanning and image superimposition, and the gaps were measured using a software program. The agreement between the measurement techniques was evaluated by using the 95% Bland-Altman limits of agreement and concordance correlation coefficients (CCC). The least acceptable CCC was 0.90. RESULTS. The RT and CART groups showed linear association, with a strong positive correlation in gap measurements, but without significant differences. The 95% limits of agreement between the paired gap measurements were 3.84% and 7.08% of the mean. The lower 95% confidence limits of CCC were 0.9676 and 0.9188 for the marginal and occlusal gap measurements, respectively, and the values were greater than the allowed limit. CONCLUSION. The CART is a reliable digital approach for evaluating the fit accuracy of fixed dental prostheses.