• Journal of Environmental Impact Assessment
• /
• v.33 no.5
• /
• pp.228-251
• /
• 2024

It is clear that the implementation of Total Pollution Load Management (TPLM) has contributed to the improvement of river water quality in Korea. However, it is also true that the TPLM has focused on point source pollution management, with limitations in addressing non-point source pollution. This study examined the issues of the current TPLM from the perspective of non-point source pollution, which is closely related to high-flow conditions, by analyzing Load Duration Curves (LDC) using water quality and flow data collected over the past four years from 21 sub-watersheds in the Geum River Basin. Since the current TPLM is based on water quality predictions using a static water body model that applies the average flow of the dry season, we found that the reduction in loads required under actual flow conditions could be up to 140 times greater than under the reference flow condition, indicating that load amounts under high-flow conditions are not reflected. Additionally, there were abnormal correlations between discharge loads and water quality in several sub-watersheds, and illogical situations arose where compliance with allocated loads did not align with achieving the target water quality. While the causes of such abnormal and illogical situations are diverse and complex, this study highlights the need for rational reflection of non-point source loads under high-flow conditions in water quality modeling. As a solution, we propose the application of watershed models and dynamic water body models.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.4
• /
• pp.493-499
• /
• 2022

The standards pertaining to the quality of discharged water in sewage treatment plants are strengthening, and accordingly, facilities in sewage treatment plants are being upgraded. In addition, the discharge water quality of sewage treatment plants must be maintained at a high level, and efficient sewage treatment plant operations have thus emerged as a very important issue. For the efficient operation of sewage treatment plants, this study applied a basic blowing amount calculation method based on sewage facilities to evaluate the required oxygen amount and blowing amount according to inflow water quality by logicizing various influencing factors. As a result of calculating the amount of air blown by applying actual April water quality data from sewage treatment plant A to the blower demand calculation developed through this study, it was found that the average amount of air blown was reduced by about 12%. When the blower demand calculation developed here is applied to an actual sewage treatment plant, the amount of air blown can be controlled based on the inflow water quality. This can facilitate the realization of an autonomous control of sewage treatment plants, in contrast to the existing sewage treatment operation method that relies on operational experience of operator. In addition, it is expected that efficient sewage treatment plants can be operated by reducing blowing amounts and power costs, which will contribute to both energy and carbon savings.

• The Korean Journal of Health Service Management
• /
• v.10 no.3
• /
• pp.63-74
• /
• 2016

Objectives : There is a need to develop a data quality management algorithm to improve the quality of healthcare data using a data quality management system. In this study, we developed a data quality control algorithms associated with diseases related to hypertension in patients with diabetes mellitus. Methods : To make a data quality algorithm, we extracted the 2011 and 2012 discharge damage survey data from diabetes mellitus patients. Derived variables were created using the primary diagnosis, diagnostic unit, primary surgery and treatment, minor surgery and treatment items. Results : Significant factors in diabetes mellitus patients with hypertension were sex, age, ischemic heart disease, and diagnostic ultrasound of the heart. Depending on the decision tree results, we found four groups with extreme values for diabetes accompanying hypertension patients. Conclusions : There is a need to check the actual data contained in the Outlier (extreme value) groups to improve the quality of the data.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.3 no.2
• /
• pp.75-82
• /
• 2011

Recently the technology of green growth became more important role among the problems of running out of fossil fuels and global warming. To procure a new growth power combined with energy and green growth, a lot of investment for wind power, photovoltaics system, fuel cell and biofuel expanded day by day. Among these, wing power has a merit of a highly economic and no discharge of toxic substance. These days government and industrial companies actively support the development of wind power technology with lots of investment, but domestic related education and equipment still stay in research level when it is compared with foreign advanced countries which lead the wind power technology. Therefore to expand the base of basic skill required in the related industrials and to advance technology, we are in the situation to be needed a development of a new curriculum and educational equipment which is analogous with the actual industrial system. In this paper a development of a new educational equipment for the learning of turbine control is introduced. This educational equipment has been developed for students to get easy understanding for the theory of wind turbine control. And finally to demonstrate the effect of the use of the developed equipments and curriculum a questionnaire carried out.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.8
• /
• pp.3594-3602
• /
• 2011

The purpose of this study is complementing existing flood-reaching timetable by theoretically determined numerical model and suggesting techniques for calculating the exact arrival time of flood. For this, according to the discharge of Namhan River, arrival time measurements, using u-IT technology applied sensor buoys, were performed. Based on the results of measurements, this study proposed complementary relation of average reach time by the discharged water considering tributary inflow, which was not considered established expression. With this study, u-IT based actual technology that is complementing the existing flood forcasting-warning data was developed. Applying this technology to the average reach time calculation by the discharged water, it is expected to reduce flood-oriented damage.

• Herbal Formula Science
• /
• v.12 no.2
• /
• pp.57-76
• /
• 2004

This report describes the remedial fields, symptoms, pathology, dosage, prescriptional constitution of 69 studies related to the use of Radix Asari main blended prescriptions from Dongeubogam. The following conclusions were reached through investigations on the prescriptions that use Radix Asari as a key ingredient. Radix Asari blended prescriptions are utilized for 14 therapeutic purposes, for example, in symptoms of tooth, eye, paralysis, ear-nose, skin infection and carbuncle. In particular, 14.49% of the prescriptions appear in the chapter of tooth, and 10.14% of those appear in the chapter of eye. Prescriptions that utilize Radix Asari as the main ingredient are used in the treatment of dental disease, othalmology, nose and ear disease, throat disease, common cold, dermothology, paralysis, musculoskeletal disease, disease of the head, asthma, genital disease, the injury of the cuts and they are also used for treating 50 different types of diseases. Radix Asari is used in Six pathogenic factors such as wind, wind-cold, wind-heat, wind-dampness heat, wind-dampness, dampness, paralysis, cold-chill, cold, dryness, in visceral pathogenic factors such as stomach, kidney, liver-kidney, liver and in chi-blood pathogenic factors such as chi-blood deficiency, chi-blood stagnation and in extravasated blood pathogenic factors such as impact injury, an injury such as cuts, blood accumulation as well as weakness-cold and parasites. The actual amount of Radix Asari blended has ranged at a wide variety of amounts from 2.5pun(about 0.94gram) to 3don(about 11.25gram). 26.09% of the prescriptions used 1don(about 3.75gram). The function of Radix Asari is to calm down, to get the consciousness back, to bore through, to warm up the meridians and to run it smoothly, to discharge of phlegm from the combination of drugs and prescriptions.

• Journal of Astronomy and Space Sciences
• /
• v.27 no.3
• /
• pp.253-262
• /
• 2010

The electrical power system (EPS) of Korean satellites in low-earth-orbit is designed to achieve energy balance based on a one-orbit mission scenario. This means that the battery has to be fully charged at the end of a one-orbit mission. To provide the maximum solar array (SA) power generation, the peak power tracking (PPT) method has been developed for a spacecraft power system. The PPT is operated by a software algorithm, which tracks the peak power of the SA and ensures the battery is fully charged in one orbit. The EPS should be designed to avoid the stress of electronics in order to handle the main bus power from the SA power. This paper summarizes the results of energy balance to achieve optimal power sizing and the actual trend analysis of EPS performance in orbit. It describes the results of required power for the satellite operation in the worst power conditions at the end-of-life, the methods and input data used in the energy balance, and the case study of energy balance analyses for the normal operation in orbit. Both 10:35 AM and 10:50 AM crossing times are considered, so the power performance in each case is analyzed with the satellite roll maneuver according to the payload operation concept. In addition, the data transmission to the Korea Ground Station during eclipse is investigated at the local-time-ascending-node of 11:00 AM to assess the greatest battery depth-of-discharge in normal operation.

• Quality Improvement in Health Care
• /
• v.9 no.1
• /
• pp.34-51
• /
• 2002

Background : The purpose for this study is to develop a critical pathway of bullectomy for spontaneous pneumothorax patients. Methods : For this study a conceptual framework of critical pathway was developed through a review of the literature including five critical pathways which are currently being used in USA, and opinions of the critical pathway development team members at Y university hospital. In order to identify the service contents required by these patients and to draw up a preliminary critical pathway, 33 cases of medical records of patients who had received bullectomy for spontaneous pneumothorax between September, 2000 to August, 2001 at the Respiratory Center of Y university hospital in Seoul was analyzed. Results : In order to test the clinical validity of the preliminary critical pathway, it was applied to ten patients who had received bullectomy for spontaneous pneumothorax from October, 2001 to December, 2001. The average discharge day was 4.89th post operation day, six patients discharged on the fourth post operation day which was the expected day, one patients discharged one day earlier than the expected day, one patient discharged three days later than the expected day, and one patient discharged six days later than the expected day. There were variances between the critical pathway and the actual practice. The variances came from tests, medications, and treatments. One item that showed variance in clinical applications was complemented, and three items were decided not to be corrected for the final determination of the critical pathway. Conclusion : This critical pathway is applicable to the care of patients with bullectomy for spontaneous pneumothorax, but it needs more clinical applications to grasp varied variances.

• Journal of Advanced Navigation Technology
• /
• v.21 no.6
• /
• pp.651-658
• /
• 2017

There were many studies on the development of radiation measuring instruments to detect the presence of radiation. In particular, the signal processing method and treatment without loss of the detection signal are very important. The common feature for these studies is the peak-hold method that keeps the peak value of input signal uniform for a short time, readouts its value, discharges electrical value, and then waits for next signal. We propose the new methodology to capture the pulse peak value from the radiation detector and read the value directly other than peak-hold method. This method has merit of accurate reading the input signal pulse peak value without complicate process of holding for a period or initializing of input signal, and then be verified to be adequate through simulation of actual example.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.10
• /
• pp.965-975
• /
• 2005

In the case of the fault in stator windings of a high voltage motor. it facilitates certain destructive characteristics in insulations. This will result in a decreased reliability in power supplies and will prevent the generation of electricity, which will result in huge economic losses. This study simulates motor windings using normal windings and four faulty windings for an actual fault in stator winding of a high voltage motor. The partial discharge signals produced in each faulty winding were measured using an 80 PF epoxy/mica coupler sensor. In order to quantified signal waves its a way of feature extraction for each faulty signal, the signal wave of winding was quantified to measure the degree of skewness shape and kurtosis, which are both types of statistical parameters, using a discrete wavelet transformation method for each faulty type. Wave types present different types lot each faulty type, and the skewness and kurtosis also present different quantified values. The result of feature extraction was used as a preprocessing stage to identify a certain fault in stater windings. It is evident that the type of faulty signals can be classified from the test results using faulty signals that were randomly selected from the signal, which was not applied in the training after the training and learning period, by applying it to a back-propagation algorithm due to the supervising and learning method in a neural network in order to classify the faulty type. This becomes an important basis for studying diagnosis methods using the classification of faulty signals with a feature extraction algorithm, which can diagnose the fault of stator windings in the future.