• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.3
• /
• pp.217-223
• /
• 2013

A digital retrodirective antenna system is easy to modify and upgrade because it can control the phase information of the output signal toward opposite direction to input signal without a priori knowledge of the arrival direction. Due to this advantage, it is possible to perform fast beam tracking. In this paper, a design digital retrosirective array antenna system according to the number of antenna array by using only one digital PLL which finds angle of delayed phase and we test BER performance of this system. When we transmit data at actual communication system, the data modulated onto carrier frequency in order to shift spectrum from base band to another band. So we simulate system considering carrier frequency according to the number of antenna array. As a result, carrier frequency has no impact on the performance.

• Membrane Journal
• /
• v.5 no.4
• /
• pp.129-136
• /
• 1995

This study is concerned with the treatment of dye wastewater by carrier meditated emulsion liquid membrane. Optimum conditions for the removal of anionic dye and cationic dye by the emulsion liquid membrane(ELM) containing Aliquat 336 or D2EHPA were obtained in the batch operation, an actual dye wastewater was tested under these conditions. Dye reagents used were Sirius Red(Direct dye), Reactofix Supra Blue(Reactive dye), and Apollo Blue(Basic dye). The experimental variables were surfactant(Span 80) and carrier(Aliquat 336 or D2EHPA) concentration in the membrane phase, the counter ion($Na_2SO_4$) concentration in the internal phase and the amount of emulsion. Extraction equilibrium arrived within 5 minutes after starting reaction and more than 95% of dye ion could be removed. The carrier concentration in the membrane phase was the most crucial for the removal efficiency, but other variables effected to the reaction time more than the removal efficiency. The dye wastewater was treated under the optimum conditions in two steps. The absorbance at 550nm of wastewater was decreased 0.53 to below 0.03 after 10 minutes treatment.

• The Korean Journal of Air & Space Law and Policy
• /
• v.23 no.2
• /
• pp.67-92
• /
• 2008

The purpose of this paper is to research the requirements and effect of the document of carriage in respect of the carriage of cargo by air under the Montreal Convention of 1999, IATA Conditions of Carriage for Cargo, and the judicial precedents of Korea and foreign countries. Under the Article 4 of Montreal Convention, in respect of the carriage of cargo, an air waybill shall be delivered. If any other means which preserves a record of the carriage are used, the carrier shall, if so requested by the consignor, deliver to the consignor a cargo receipt. Under the Article 7 of Montreal convention, the air waybill shall be made out by the consignor. If, at the request of the consignor, the carrier makes it out, the carrier shall be deemed to have done so on behalf of the consignor. The air waybill shall be made out in three original parts. The first part shall be marked "for the carrier", and shall be signed by the consignor. The second part shall be marked "for the consignee", and shall be signed by the consignor and by the carrier. The third part shall be signed by the carrier who shall hand it to the consignor after the goods have been accepted. Under the Article 5 of Montreal Convention, the air waybill or the cargo receipt shall include (a) an indication of the places of departure and destination, (b) an indication of at least one agreed stopping place, (c) an indication of the weight of the consignment. Under the Article 10 of Montreal Convention, the consignor shall indemnify the carrier against all damages suffered by the carrier or any other person to whom the carrier is liable, by reason of the irregularity, incorrectness or incompleteness of the particulars and statement furnished by the consignor or on its behalf. Under the Article 9 of Montreal Convention, non-compliance with the Article 4 to 8 of Montreal Convention shall not affect the existence of the validity of the contract, which shall be subject to the rules of Montreal Convention including those relating to limitation of liability. The air waybill is not a document of title or negotiable instrument. Under the Article 11 of Montreal Convention, the air waybill or cargo receipt is prima facie evidence of the conclusion of the contract, of the acceptance of the cargo and of the conditions of carriage. Under the Article 12 of Montreal Convention, if the carrier carries out the instructions of the consignor for the disposition of the cargo without requiring the production of the part of the air waybill or the cargo receipt, the carrier will be liable, for any damage which may be accused thereby to any person who is lawfully in possession of that part of the air waybill or the cargo receipt. According to the precedent of Korea Supreme Court sentenced on 22 July 2004, the freight forwarder as carrier was not liable for the illegal delivery of cargo to the notify party (actual importer) on the air waybill by the operator of the bonded warehouse because the freighter did not designate the boned warehouse and did not hold the position of employer to the operator of the bonded warehouse. In conclusion, as the Korea Customs Authorities will drive the e-Freight project for the carriage of cargo by air, the carrier and freight forwarder should pay attention to the requirements and legal effect of the electronic documentation of the carriage of cargo by air.

• Journal of Korea Port Economic Association
• /
• v.39 no.4
• /
• pp.1-21
• /
• 2023

This study analyzed workers' residence and home-based work(HBW) trip by utilizing data from mobile carrier base stations of Gwangyang Port and terminal workers. In the past, research on port-related traffic or trip patterns mainly focused on cargo-based movement patterns for estimating cargo volume and port facilities, but this study analyzed trip patterns for workers in Gwangyang Port ports and related industries. As a result of the analysis, the average number of regular workers in the port hinterland Gwangyang Port was 1,295 per month, and the residence of workers was analyzed in Gwangyang City (66.1%)>Suncheon City (26.6%)>Yeosu City (3.1%). The average number of temporary workers in the hinterland was 2,645 per month, and Gwangyang City (45.8%)>Suncheon City (20.1%)>Yeosu City (5.7%). Next, the average number of regular workers at Gwangyang Port terminals was 753 per month, and Gwangyang City (66.1%)>Suncheon City (28.9%)>Yeosu City (3.3%) was analyzed. The average number of temporary workers at Gwangyang Port terminals was 1,893 per month, and Gwangyang City (50.8%)>Suncheon City (19.7%)>Yeosu City (9.8%). This study is expected to calculate the number of workers based on individual traffic using actual mobile carrier data to estimate the actual number of workers if the workplace address and actual work place are different, such as in port-related industries. This study is the first to be conducted on workers at Gwangyang Port. It is expected to be used as basic data for settlement conditions and urban planning, as well as transportation policies for port workers, by identifying the population coming from areas other than Gwangyang, where Gwangyang Port is located.

• The Korean Journal of Air & Space Law and Policy
• /
• v.21 no.1
• /
• pp.29-63
• /
• 2006

This paper studied and introduced the aviation law cases in applying the treaties of the Warsaw System to the liability of the international air carrier by categorizing four main sections. Firstly, this paper handled the cases regarding the defining an international flight, exclusivity of the treaties as international air carrie's liability Convention, determining treaty relationship between the countries which one country has ratified only the Hague Protocol, an amended version of the Warsaw Convention, while the other has ratified only the original, unamended Warsaw Convention. Annotation assisted the case if it needed. Secondly, the cases relating to the issues of actual and contracting carrier, successive carrier, agents and servants of the carrier and others were studied. Thirdly, the issues relating to the accident in the course of any operations of embarking or disembarking of passengers, the occurrence during the transportation by air of baggage or goods and delay in the transportation by air of passengers, baggage or goods in addition to the cancellation of the flights were studied according to the applicable range. Fourthly, I studied the time issue with effective date of the treaties. Conclusively, it is not excessive to emphasize the importance of cases in Aviation Law like all other legal areas, therefore, a full-dress future reaserch of aviation cases is expected in here Korea with this paper as a foundation although it studied and introduced only a part of numerous aviation law cases.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.5
• /
• pp.617-626
• /
• 2019

This study analyzes the optimal location of gas detectors through the gas dispersion in a cargo compressor room of a 174K LNG carrier equipped with high-pressure cargo handling equipment; in addition, we propose a reasonable method for determining the safety regulations specified in the new International Code of the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk (IGC). To conduct an LNG gas dispersion simulation in the cargo compressor room-equipped with an ME-GI engine-of a 174 K LNG carrier, the geometry of the room as well as the equipment and piping, are designed using the same 3D size at a 1-to-1 scale. Scenarios for a gas leak were examined under high pressure of 305 bar and low pressure of 1 bar. The pinhole sizes for high pressure are 4.5, 5.0, and 5.6mm, and for low pressure are 100 and 140 mm. The results demonstrate that the cargo compressor room will not pose a serious risk with respect to the flammable gas concentration as verified by a ventilation assessment for a 5.6 mm pinhole for a high-pressure leak under gas rupture conditions, and a low-pressure leak of 100 and 140 mm with different pinhole sizes. However, it was confirmed that the actual location of the gas detection sensors in a cargo compressor room, according to the new IGC code, should be moved to other points, and an analysis of the virtual monitor points through a computational fluid dynamics (CFD) simulation.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.43
• /
• pp.297-336
• /
• 2009

In modern industrial society carriage of dangerous goods by sea becomes more increasing than ever before. Dangerous goods are required for special care and handling in that shipment of dangerous goods could affect safety of the vessel and other cargoes. It is also true that dangerous goods could be used as a means of terrorism. his article investigates allocation of risk and liabilities between parties involved in the carriage of dangerous goods by sea. More specifically, this study examines principles of strict liability of the shipper in shipment of dangerous goods with some limitations based upon recent cases. Furthermore this article investigates the issues on identity of shipper who bears strict liability to the carrier where there exist actual or documentary shipper other than the contractual shipper. Lastly, whether it is reasonable that the transfer of strict liability to the transferee, who does not have opportunity to verify dangerous nature of the goods before shipment, by endorsing bills of lading will be discussed critically.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1046-1049
• /
• 2006

We proposed a simplified fabrication structure and method which can provide separate Red (R), Green (G), Blue (B), and White (W) OLED pixels with 2 metal-mask changes in emitting layer fabrication inspired from the structure of multi-layer white OLED and carrier blocking mechanism. A red emission layer for the R and W pixel with 1st mask, and then a blue emission layer with hole blocking layer for the B and W pixel with 2nd mask, and finally a common green emission layer were deposited sequentially. We expect that this concept would be very useful to the actual fabrication of multi-color OLED display although additional optimization is needed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.498-503
• /
• 2009

This paper presents the vibration problem of the Engine Casing (E/C) "B" deck in the handymax vessel and describes a method to avoid resonance. The first ship of the series did not have any vibration issue on the "B" deck. However, resonance condition occurred when additional machine was installed to the following vessels. To understand the dynamic characteristics of the deck, the normal mode analysis and impact test have been performed. Within the normal operating range of the vessel, the $1^{st}$ natural frequency of the E/C "B" deck is close to the main engine's $6^{th}$ order. Based on these analysis, a reinforcement on the deck was suggested and it proved to be effective. Since actual impact test after the reinforcement also confirmed the resonance avoidance.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.187-193
• /
• 2011

In this report, We compared the actual test with the result of pow calculation and Resistance/Self-propulsion of the ship using STAR-CCM+ which is the commercial Reynolds Averaged Navier-Strokes(RANs) Solver. The calculation model was the KRISO Container Ship and 205K Bulk Carrier of Sungdong shipbuilding company. For this calculation, We used Realizable K-Epsilon model for flaw analysis, VOF method for the free surface creation, Moving Reference Frame method for reducing the POW calculation time, and Sliding Mesh method for Self-Propulsion analysis. Calculation of Resistance and Self-Propulsion includes the free-surface. And all calculations in this report were based on unstructured grids.