• Journal of the Korean Geographical Society
• /
• v.37 no.4
• /
• pp.371-384
• /
• 2002

It is very important to predict the environmental changes in the land-surface as a way of prevention of sustainable nature. This study investigated the difference between the predicted and actual data of Anmyeon-do from 1981 to 2000 through a fuzzy logic operation using multi-spectral image. According to literature survey, maps, and ground truth data, the types of land-use have changed due primarily to shore reclamation or wild land and grassland fostering before the eighties. After the mid-eighties, however, a number of private residents and commercial stores quickly have spreaded throughout beach resorts and quasi-agricultural and forest areas. Moreover, shore and community regions were severely damaged in the nineties with increased farmland, due to the development of tour places and expansion of city area. The predicted result of the environmental changes in the land-surface using the fuzzy logic operation was almost similar to the state of Anmyeon-do obtained through the satellite image. Particularly, the flat lands near the shore was predicted to change slightly. This area is largely under development, thereby raising concerns on the shore environment. Thus, this method is applicable to conducting research on the change in the land-surface.

• Korea Journal of Hospital Management
• /
• v.13 no.2
• /
• pp.20-35
• /
• 2008

Though the attending system was first implemented in 2003 to facilitate the efficient utilization of medical resources and specialties, only a few hospitals and physicians are participated in that system. The purpose of this study was to investigate the actual facts which related to operation of attending system and propose a basic information to revitalized of the attending system in Korea. The data were collected between August 1 and October 30, 2005 from 25 hospitals and 42 attending physicians who were in part of the attending system. Medical institutions were unwilling to participate despite the advantages of the attending system with respect to the utilization of medical resources and improvement in the quality of medical services. The primary reason for this was the lack of understanding among physicians about the attending system and the difficulty(lack of time) encountered by the attending physicians in administering care to patients hospitalized in the attending hospitals. Moreover insufficient reimbursement for rendered medical services constituted another important reason. In conclusion, we can state that the establishment of a committee is required to discuss the issues surrounding the attending system and to control the growing disparity between the viewpoints of hospitals and physicians. Regardless, there is a need to develop economical incentives for medical institutes. The attending system served as a useful policy in promoting the medical service system and bringing about an improvement in the management of medical institutes.

• International Journal of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.87-94
• /
• 2019

In the study, we show the annual average increasing rate of death bodies in the capital area was 2.1% while the annual average increasing rate of cremated bodies was 4.5%. As the annual average increasing rate of cremated bodies was about 2.1 times higher than the annual average increasing rate of death bodies, the increase rate of cremated bodies contrast to the increase rate of death bodies was relatively high. Also, the cremation rate of the capital area was increased by 9.5% from 80.3% in 2011 to 89.8% in 2017 while the increase rate of cremated bodies was 27.2%(N=21,694 people) from 79,866 people in 2011 to 101,560 people in 2017. Thus, the increase rate of cremated bodies contrast to the increase of cremation rate of the capital area was relatively very high. On the basis of 2017, the utilization rate of public cremation facilities in by capital area was 94.5% in Incheon Metropolitan City, 91.1% in Seoul Metropolitan City, and 20.9% in Gyeonggi-do, which showed huge differences in the utilization rate of public cremation facilities in the jurisdiction area of by capital area. Focusing on the actual state shown in the results of this study above, it would be necessary for Seoul Metropolitan City to carry forward a supply & demand policy of cremation facilities through the extension of cremation furnaces, for Gyeonggi-do to carry forward a policy to build the public cremation facilities focusing on the basic local government in the jurisdiction area, and for Incheon Metropolitan City to enforce the measures for the joint use of cremation facilities with the basic local government in the adjacent Gyeonggi-do jurisdiction area in order to improve the efficiency of the operation of cremation facilities.

• Journal of Korea Trade
• /
• v.24 no.8
• /
• pp.39-62
• /
• 2020

Purpose - Korean exports account for a vast proportion of Korean GDP, and large volumes of Korean products are sold in the United States. Identifying and characterizing actual and potential product hazards related to Korean products is critical to safeguard Korean export trade, as severe quality issues can impair Korea's reputation and reduce global consumer confidence in Korean products. In this study, we develop country-of-origin-based product risk analysis methods for social media with a specific focus on Korean-labeled products, for the purpose of safeguarding Korean export trade. Design/methodology - We employed two social media datasets containing consumer-generated product reviews. Sentiment analysis is a popular text mining technique used to quantify the type and amount of emotion that is expressed in the text. It is a useful tool for gathering customer opinions regarding products. Findings - We document and discuss the specific potential risks found in Korean-labeled products and explain their implications for safeguarding Korean export trade. Finally, we analyze the false positive matches that arise from the established dictionaries that were used for risk discovery and utilize these classification errors to suggest opportunities for the future refinement of the associated automated text analytic methods. Originality/value - Various studies have used online feedback from social media to analyze product defects. However, none of them links their findings to trade promotion and the protection of a specific country's exports. Therefore, it is important to fill this research gap, which could help to safeguard export trade in Korea.

• Journal of Korean Society of Rural Planning
• /
• v.29 no.3
• /
• pp.53-67
• /
• 2023

In this study, the problem of the idleness of public buildings in rural areas is seriously emerging, but there are no clear standards for assessing the utilization of these buildings. Therefore, this study endeavors to investigate the actual state of idleness of buildings created by rural area development projects based on the criteria for each type. As part of this study, rural facilities were selected in two locations in Sangju City and Miryang City among the target areas of the Rural Agreement. Utilization evaluation criteria were developed to identify the conditions of underutilization. In order to determine the utilization pattern for each facility type, an in-depth interview with the operator and an inspection of the facility were conducted. Based on the analysis, the degree of utilization (e.g., low use, non-use, etc.) was different for each facility type, and among the four facility types (rural tourism, culture and welfare, exercise and recreation, income-based), rural tourism was rated as the least efficient. It has been found that the operating entity's capacity has a significant influence on the utilization of facilities. Socioeconomic factors, such as a decrease in utilization rates, are greatly influenced by the operating entity's capacity. Therefore, support from local governments as well as the national level is required to recycle idle facilities. Lastly, this study suggests the need for different standards for utilization, depending on the type of facility. This moves beyond checking the degree of idleness by the same standard that was previously implemented.

• Journal of Power Electronics
• /
• v.16 no.5
• /
• pp.1964-1980
• /
• 2016

This paper presents a new simplified harmonics extraction algorithm based on the synchronous reference frame (SRF) for an indirect current controlled (ICC) three-level neutral point diode clamped (NPC) inverter-based shunt active power filter (SAPF). The shunt APF is widely accepted as one of the most effective current harmonics mitigation tools due to its superior adaptability in dynamic state conditions. In its controller, the SRF algorithm which is derived based on the direct-quadrature (DQ) theory has played a significant role as a harmonics extraction algorithm due to its simple implementation features. However, it suffers from significant delays due to its dependency on a numerical filter and unnecessary computation workloads. Moreover, the algorithm is mostly implemented for the direct current controlled (DCC) based SAPF which operates based on a non-sinusoidal reference current. This degrades the mitigation performances since the DCC based operation does not possess exact information on the actual source current which suffers from switching ripples problems. Therefore, three major improvements are introduced which include the development of a mathematical based fundamental component identifier to replace the numerical filter, the removal of redundant features, and the generation of a sinusoidal reference current. The proposed algorithm is developed and evaluated in MATLAB / Simulink. A laboratory prototype utilizing a TMS320F28335 digital signal processor (DSP) is also implemented to validate effectiveness of the proposed algorithm. Both simulation and experimental results are presented. They show significant improvements in terms of total harmonic distortion (THD) and dynamic response when compared to a conventional SRF algorithm.

• Structural Engineering and Mechanics
• /
• v.25 no.4
• /
• pp.445-466
• /
• 2007

As the LNG (Liquefied Natural Gas) tank contains cryogenic liquid, realistic thermal analyses are of a primary importance for a successful design. The structural details of the LNG tank are so complicated that some strategies are necessary to reasonably predict its temperature distribution. The proposed heat transfer model can consider the beneficial effects of insulation layers and a suspended deck on temperature distribution of the outer concrete tank against cryogenic conditions simply by the boundary conditions of the outer tank model. To this aim, the equilibrium condition or heat balance in a steady state is utilized in a various way, and some aspects of heat transfer via conduction, convection and radiation are implemented as necessary. Overall thermal analysis procedures for the LNG tank are revisited to examine some unjustifiable assumptions of conventional analyses. Concrete and insulation properties under cryogenic condition and a reasonable conversion procedure of the temperature-induced nonlinear stress into the section forces are discussed. Numerical examples are presented to verify the proposed schemes in predicting the actual temperature and stress distributions of the tank as affected by the cryogenic LNG for the cases of normal operation and leakage from the inner steel tank. It is expected that the proposed schemes enable a designer to readily detect the effects of insulation layers and a suspended deck and, therefore, can be employed as a useful and consistent tool to evaluate the thermal effect in a design stage of an LNG tank as well as in a detailed analysis.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.242-249
• /
• 2009

High-rise construction sites, especially those situated in spatially constrained urban areas, have difficulties in timely delivery of materials. Modern techniques such as Just-in-time delivery, and use of information technology such as Project Management Information System (PMIS), are targeted to improve the efficiency of the logistics. Such IT-driven management techniques can be further benefited from state-of-the-art devices such as Radio Frequency Identification (RFID) tags and Ubiquitous Sensor Networks (USN), which has resulted in notable achievements in automated logistics management at the construction sites. Based on those achievements, this research develops USN hardware toolkits for construction lifts, which aims to be automated the vertical material delivery by sensing the material information and routing it automatically to the right place. The gathered information from the sensors can also be used for monitoring the overall status. The developed system will be tested in the actual high-rise construction sites to assess the system's feasibility. The proposed system is being implemented using Zigbee communication modules and RFID sensor networks which will communicate with the intelligent palette system (previously developed by the authors). To support the system, a lift-mountable intelligent toolkit is under development. Its feasibility test will be conducted by applying the implemented system to a test bed and then analyzing efficiency of the system and the toolkit. The collected test data will be provided as a basis of autonomous vertical transport equipment development. From this research, efficient management of the material lift is expected with increased accuracy, as well as better management of overall construction schedule benefited from the system. Further research will be expected to develop a smart construction lift, which will eliminate the need for human supervision, thus enabling a real 'autonomous' operation of the system.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.3B no.3
• /
• pp.147-154
• /
• 2003

This paper presents a high-frequency boost type ZVS-PWM chopper-fed DC-DC power converter with a single active auxiliary edge-resonant snubber at the load stage which can be designed for power conditioners such as solar photovoltaic generation, fuel cell generation, battery and super capacitor energy storages. Its principle operation in steady-state is described in addition to a prototype setup. The experimental results of boost type ZVS-PWM chopper proposed here, are evaluated and verified with a practical design model in terms of its switching voltage and current waveforms, the switching v-i trajectory and the temperature performance of IGBT module, the actual power conversion efficiency, and the EMI of radiated and conducted emissions, and then discussed and compared with the hard switching scheme from an experimental point of view. Finally, this paper proposes a practical method to suppress parasitic oscillation due to the active auxiliary resonant switch at ZCS turn-off mode transition with the aid of an additional lossless clamping diode loop, and can be reduced the EMI conducted emission.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.6
• /
• pp.823-830
• /
• 1995

A reactive piloting policy for Flexible Assembly Lines (FAL) is proposed, where the sequencing of the operations as well as the assignment of tasks to manipulators are not predetermined but driven by the actual state of the FAL For all work-in-process coming from a manipulator, the next destination is determined by minimizing a temporal criterion taking into account the time needed to reach the destination, the load of the manipulator to reach, the durati on of the operation to be completed in the destination manipulator, and the availability of product components in this manipulator. The purpose of proposed piloting policy is to manufacture a given quantity of products as rapidly as possible by balancing the amount of work allocated to manipulators and to reduce the efforts required for scheduling the production of short series of diversified products. After introducing the characteristics of assembly processes and FAL modelization, the proposed algorithm is evaluated by simulations. The simulations of the proposed algorithm showed satisfactory results.