• 한국방재학회 논문집
• /
• 제10권2호
• /
• pp.15-21
• /
• 2010

교량의 내하력을 평가할 때 수행되는 구조해석은 재하시험을 통한 구조물의 실제거동과 유사한 거동특성을 구현하여야 되나 지점의 거동특성, 구조해석시 모델링 방법, 재하시험의 오류, 단면손상에 따른 강도 및 강성변화 등으로 인해 그렇지 못하는 경우가 있다. 특히, 교량받침이 손상하였거나 설치되지 않아 받침의 기능수행이 미비한 교량에서 이를 고려하지 않고 일률적으로 모델링을 하는 경우에는 이러한 문제가 더욱 심화될 수 있다. 본 연구에서는 단일보의 내민구간을 구속시켜 얻어진 실측처짐($\delta$실측)과 비구속상태에서의 계산처짐($\Delta$계산)과의 차이값인 $\Delta{\delta}$으로부터 얻어진 지점모멘트를 구조해석모델에 작용시켜 실제거동과 유사한 해석결과를 얻었다. 이에 따라 실제 공용중인 교량을 대상으로 지점의 구속조건을 고려하여 내하력을 평가한 결과 기존 방법에 의한 내하력에 비해 15~19% 적게 평가되었다.

• 환경영향평가
• /
• 제18권5호
• /
• pp.281-291
• /
• 2009

In Total Water Pollutant Load Management System of Korea, unit load approach based on land register data is currently used for the estimation of non-point pollutant load. However, a problem raised that land register data could not always reflect the actual land surface coverages which determine runoff characteristics of non-point pollution sources. As a way to overcome this, we tried to establish quantitative relationships between the aerial images (0.4m resolution) which reflect actual land surface coverages and the land registration maps according to the 19 major designated land-use categories in Kyeongan watershed. Analyses showed different relationships according to the land-use categories. Only a few land-use categories including forestry, road and river showed essentially identical and some categories such as orchard, parking lot and sport utility site showed no relationships at all between image data and land register data. Except for the two cases, all the other categories showed statistically significant linear relationships between image data and land register data. The analyses indicate that using high resolution aerial maps is a better way to estimate non-point pollutant load. If the aerial maps are not available, application of the linear relationships as conversion factors of land register data to image data could be an possible option to estimate non-point pollutant loads for the specific land-use categories in Kyeongan watershed.

• Spatial Information Research
• /
• 제23권5호
• /
• pp.75-85
• /
• 2015

최근 국지적 강품 및 태풍에 의한 방음벽의 변형 또는 파괴가 증가하고 있다. 본 연구에서는 1:5,000 수치지형도를 바탕으로 공간정보분석을 이용하여 방음벽의 설계풍하중 산정방법을 제시하였으며 실제 적용사례와 비교분석 하였다. GIS를 이용한 정량적인 평가 결과 건축물이 밀집한 도심지 구간은 지표조도가 III으로, 건물이 상대적으로 적은 교외지역에서는 지표조도가 II로, 개활지와 전형적인 농가밀집 지역은 지표조도가 I로 판정되는 등 실제 지표의 상태를 반영한 방음벽의 풍하중을 산정 할 수 있었다. 본 연구에서 제시한 정량적인 GIS 분석을 방음벽의 내풍설계에 반영한다면, 설계자의 주관에 따라 풍하중이 변화되는 기존의 문제점을 완화하여 보다 합리적인 내풍설계가 이루어 질 수 있을 것으로 판단된다.

• 농업과학연구
• /
• 제49권4호
• /
• pp.845-855
• /
• 2022

The purpose of this study is to develop a self-propelled underground crop harvester and its performance was evaluated by measuring the load during actual potato harvesting operations. This study was conducted at a constant working speed of 1 km·h^-1. A load measurement system was installed to measure the actual load and the required working power was analyzed. A hydraulic pressure sensor was also installed to measure the hydraulic pressure. The required hydraulic power was calculated using the hydraulic pressure and flow rate. The results showed that the engine speed, torque, and power during harvesting operation were in the range of 845 - 1,423 rpm, 95 - 228 Nm, and 9 - 31 kW, respectively. Traction power, excluding the hydraulic pump of the tractor and power take-off (PTO) output, was in the range of 9 - 28 kW, and it was confirmed that it occupies a ratio of 16.2 to 50% of the engine rated output. The engine can supply the minimum required traction power to move the vehicle. This means that the engine used in this study could be down-sized to be suitable for an underground crop harvester. In this study, the gear stages of the tractor were not considered. This research thus shows the possibility of developing a self-propelled underground crop harvester.

• 해양환경안전학회지
• /
• 제30권4호
• /
• pp.358-364
• /
• 2024

선박 건조 과정에서 블록이나 장비를 지지하는 A형 캐리어 구조는 하중 변경과 시간이 지남에 따라 점차 변형이 증가하며, 이에 따라 블록과 접촉하는 면적이 감소하고 분산된 하중에서 집중된 하중으로 패턴이 변화한다. 이러한 현상은 실제 사용 하중을 오판할 가능성이 있다. 특히 A형 캐리어는 영세한 제조 업체에서 자주 사용하고 있으며, 별도의 엔지니어링 기능이 없는 상황이 대부분이라서 손쉽게 캐리어의 안전사용하중을 계산하는 방법의 개발이 필요하다. 본 연구는 A형 캐리어가 장기적으로 안전하게 사용할 수 있는 하중을 신속하게 평가하는 방법을 제안함으로써, 하중 분포의 변화에 따른 소성 변형과 그로 인한 안전 문제를 예측하고 대응할 수 있다. 제안된 방법은 캐리어의 중앙 집중하중과 전체 분포하중 조건에 대해서 유한요소해석(빔, 쉘 모델링)을 통한 결과를 기반으로 빔-이론을 수정하여 제안되었다. 빔 모델링에서 집중하중 조건은 보정계수 0.73, 분포하중에서는 0.69를 이론값에 곱해서 안전사용하중이 가능하다. 쉘 모델링의 경우, 집중하중은 0.75와 분포하중은 0.69를 사용할 수 있다. 본 연구는 선박 건조 작업 현장의 안전을 개선하고, 실제 작업 환경에서의 안전 사용 하중 판단에 신속하고 효과적인 결정을 내릴 수 있는 기초 자료로 활용될 수 있다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
• /
• pp.693-697
• /
• 2005

This study was performed to develop accelerated life test method of the wind-turbine gearbox using accumulated damage theory that used to model the fatigue of parts that receive variable load. The accumulated damage theory was introduced, and the estimation of life and calculation of accelerated life test time was illustrated. As the actual application example, accelerated life test method of the gearbox was described. Life distribution of the wind-turbine gearbox was supposed to follow Weibull distribution and life test time was calculated under the conditions of average life (MTBF) 140,600 hours and 99% reliability for one test sample According to the accumulated damage theory, because test time can shorten in case increase test load, test time could be reduced by 1.2 years when we put the load 1.2 times of rated load than 0.93 times of rated load that is equivalent load calculated by load spectrum of the wind turbine. This time, acceleration coefficient was 21.3. This accelerated test method was used to develop accelerated test method of gear reducer, gear and bearing as well as the industrial gearbox and it is considered to be applied comprehensively to mechanical parts the fatigue of which is happened by load or pressure etc.

• 연구논문집
• /
• 통권32호
• /
• pp.35-43
• /
• 2002

This study was performed to develop accelerated life test method of machanical parts using cumulative damage theory that used to model the fatigue of parts that receive variable load. The cumulative damage theory was introduced, and the estimation of life and calculation of accelerated life test time was illustrated. As the actual application example, accelerated life test method of agricultural tractor transmission was described. Life distribution of agricultural tractor transmission was supposed to follow Weibull distribution and life test time was calculated under the conditions of average life (MTBF) 3,000 hours and 90% reliability for one test sample. According to the cumulative damage theory, because test time can shorten in case increase test load, test time could be reduced by 482 hours when we put the load 1.1 times of rated load than 0.73 times of rated load that is equivalent load calculated by load spectrum of the agricultural tractor. This time, acceleration coefficient was 11.7. This accelerated test method was used to develop accelerated test method of gear reducer, hydraulic hose and bearing as well as agricultural tractor transmission and it is considered to be applied comprehensively to machanical parts the fatigue of which is happened by load or pressure etc.

• 전산구조공학
• /
• 제3권1호
• /
• pp.109-116
• /
• 1990

본 연구에서는 사무실 적재하중을 체계적으로 조사.수집하여 등가등분하중을 산정하였다. 등가등분포하중은 슬래브, 보 기둥등의 부재별로 영향선을 이용하여 분석하였다. 여기에서 하중효과는 보와 슬래브에서는 휨모멘트, 기둥에서는 축력이 고려되었다. 산정된 등가등분포하중 자료로부터 적재하중의 확률적 특성과 영향면적과의 상관관계가 분석되었으며, 다른 하중조사결과와도 비교되었다. 분석된 적재하중의 확률모형을 이용하여 사용기간 동안의 극한값을 산정하였으며, 이 결과는 현행 설계적재하중과 비교되었다. 또한 보다 합리적인 설계적재하중을 결정할 수 있는 기초자료로서 영향면적에 따른 설게하중식을 제안하였다.

• 전기학회논문지
• /
• 제62권2호
• /
• pp.149-154
• /
• 2013

Short term load forecasting for electric power demand is essential for stable power system operation and efficient power market operation. High accuracy of the short term load forecasting can keep the power system more stable and save the power market operation cost. We propose an optimal coefficient selection method for exponential smoothing model in short term load forecasting on weekdays. In order to find the optimal coefficient of exponential smoothing model, load forecasting errors are minimized for actual electric load demand data of last three years. The proposed method are verified by case studies for last three years from 2009 to 2011. The results of case studies show that the average percentage errors of the proposed load forecasting method are improved comparing with errors of the previous methods.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.193-196
• /
• 1999

The current boost type atatic excitation system for synchronous generator that can sustain prope output voltage level even at fault condition is proposed. The proposed excitation system is capabl of supplying level 60% of the rated voltage. The proposed system is verified and tested using computer simulations as well as load tests. The load tests are performed with a 5KVA synchronous generator driven by a ac motor. The actual tests results indicated a good performance.