• Korean Journal of Food Science and Technology
• /
• v.45 no.1
• /
• pp.53-58
• /
• 2013

The effect of baking on the physicochemical and sensory properties was investigated using a model system of sponge cakes incorporated with pine leaf powder (PLP) as a value-added food ingredient. PLP was incorporated into cake batter at 5 levels (0, 2, 4, 6, and 8%, w/w) by adding an equivalent amount based on the weight of wheat flour. After appropriate mixing, sponge cakes were baked at $170^{\circ}C$ for 30 min in an oven. The baked cakes were cooled to room temperature for 1 h prior to all measurements. The pH, moisture content, specific volume, height, volume index, and symmetry index decreased significantly with the increase in PLP content (p<0.05). On the contrary, specific gravity of the batter and baking loss increased (p<0.05). The lightness of the cakes decreased, whereas redness increased significantly with the higher amount of PLP in the formulation (p<0.05). Hardness also increased significantly (p<0.05). Both total polyphenol content and DPPH (1,1-diphenyl-2-picryl hydrazyl) radical scavenging activity increased significantly by the addition of PLP (p<0.05). The consumer acceptance test indicated that the addition of PLP up to 4% did not cause a significant unfavorable effect on the consumer acceptances in all attributes. The sponge cakes with 2-4% PLP would be recommended with respect to the overall acceptance score while taking advantage of the functional properties of PLP without sacrificing the consumer acceptability.

• Journal of Construction Engineering and Project Management
• /
• v.8 no.4
• /
• pp.1-24
• /
• 2018

In the last decade, the use of Building Information Modeling (BIM) as a new technology has been applied with traditional Computer-aided design implementations in an increasing number of architecture, engineering, and construction projects and applications. Its employment alongside construction management, can be a valuable tool in helping move these activities and projects forward in a more efficient and time-effective manner. The traditional stakeholders, i.e., Owner, A/E and the Contractor are involved in this BIM system that is used in almost every activity of construction projects, such as design, cost estimate and scheduling. This article extracts major features of the application of BIM from perspective of participating BIM components, along with the different phrases, and applies to them a logistic analysis using a fuzzy performance tree, quantifying these phrases to judge the effectiveness of the BIM techniques employed. That is to say, these fuzzy performance trees with fuzzy logic concepts can properly translate the linguistic rating into numeric expressions, and are thus employed in evaluating the influence of BIM applications as a mathematical process. The rotational fuzzy models are used to represent the membership functions of the performance values and their corresponding weights. Illustrations of the use of this fuzzy BIM performance tree are presented in the study for the uninitiated users. The results of these processes are an evaluation of BIM project performance as highly positive. The quantification of the performance ratings for the individual factors is a significant contributor to this assessment, capable of parsing vernacular language into numerical data for a more accurate and precise use in performance analysis. It is hoped that fuzzy performance trees and fuzzy set analysis can be used as a tool for the quality and risk analysis for other construction techniques in the future. Baldwin's rotational models are used to represent the membership functions of the fuzzy sets. Three scenarios are presented using fuzzy MEAN, AND and OR gates from the lowest to intermediate levels of the tree, and fuzzy SUM gate to relate the intermediate level to the top component of the tree, i.e., BIM application final performance. The use of fuzzy MEAN for lower levels and fuzzy SUM gates to reach the top level suggests the most realistic and accurate results. The methodology (fuzzy performance tree) described in this paper is appropriate to implement in today's construction industry when limited objective data is presented and it is heavily relied on experts' subjective judgment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.507-512
• /
• 2019

To study how illuminance affects cognitive ability of the elderly, the elderly's EEG, concentration, HRV and vibra image were measured in a test room with temperature $25[^{\circ}C]$, relative humidity 50[RH%] and air flow speed 0.02[m/sec] by varying illuminance to 100[lux], 300[lux], 600[lux], 1000[lux] and 1500[lux]. Ten active elderly males were selected as subjects. Experiment condition was fixed as 1met of activity amount where the subject is seated and relaxed with cloth amount of 0.7clo. As a result, 1000[lux] was found out to be the most pleasant illuminance for the elderly, because $M{\beta}$ increased by 66.35%, and $S{\alpha}$ increased by 31.57% when the elderly was under 1000[lux] of illuminance. Also, concentration under 1000[lux] increased by 8.83% compared to 100[lux], and the pattern of concentration maintained uniformly. SDNN increased by 74.94% under 1000[lux] compared to 100[lux]. Nervousness decreased by 97.23% under 1000[lux] compared to 100[lux]. Moreover, HRT notably increased and aggression remarkably decreased under illuminance of 1000[lux]. Thus, based on the fact that comfort, concentration and heart stability of the elderly reach the highest under 1000[lux], it is determined that the illuminance has to be considered foremost in designing the elderly's welfare facilities to raise their safety and level of independence.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.9
• /
• pp.55-66
• /
• 2018

This study aims to propose color affective model of indoor space by evaluating subjects' physiological responses according to the types of behavioral and affective system. 99 subjects(44 females, 55 males) in their 20s, who had no disorders in visual perception, participated in the experiment. To categorize the subjects based on behavioral and affective system, BAS/BIS scale and Affective scale were used. Color stimuli were composed of five basic colors and three tones: vivid, pale and dull tone of R, Y, G, B, P. For physiological experiment, right and left prefrontal alpha activity was measured to analyze prefrontal EEG asymmetry. Participants were exposed to fifteen color stimuli for 20 seconds each other under the positive and negative emotional condition in a research room with the natural light blocked. The results and conclusion of this study are as follows. Along with factors of behavioral and affective system, cluster analysis was carried out and four types were classified. Type A had high BAS sensitivity, especially high 'drive' trait, and showed high levels of 'anxiety' and 'anger'. Type B had low BAS sensitivity, especially low 'fun seeking' and low 'drive' trait, and showed low levels of 'anxiety' as well as low levels of 'happiness'. Type C had low BIS sensitivity and showed high levels of 'happiness' and low levels of 'sadness'. Type D had high BIS sensitivity and showed high levels of 'lethargy' and 'sadness'. As a result of EEG signal analysis of color stimuli, Type B, Type C, and Type D showed significant differences in prefrontal alpha asymmetry under the negative emotional stimuli. Type B showed more left prefrontal activation in the spaces with pale R and dull G. Type C showed more left prefrontal activation in the spaces with vivid Y and B, pale R, and dull R, G, P. Type D showed more left prefrontal activation in the spaces with vivid Y and P, pale R, Y, P, and dull R, Y, G, B, P. The group of high BAS sensitivity was not influenced by color stimuli under the emotional conditions, whereas the group of high BIS sensitivity was affected by color stimuli under the negative emotional conditions. They showed left prefrontal activation when they were exposed the spaces with vivid, pale, dull tones of Y and P wall.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.29 no.4
• /
• pp.47-54
• /
• 2021

In this study, the performance of a honeycomb-type hydrogen oxidation catalyst to remove hydrogen in a hydrogen economy society to secure leaking hydrogen. The Pd/TiO₂ catalyst was prepared based on a liquid phase reduction method that is not exposed to a heat source, and it was showed through H₂-chemisorption analysis that it existed as very small active particles of 2~4 nm. In addition, it was found that the metal dispersion decreased and the active particle size increased as the reduction reaction temperature increased. It was meant that the active metal particle size and the hydrogen oxidation performance were in a proportional correlation, so that it was consistent with the hydrogen oxidation performance reduction result. The prepared catalyst was coated on a support in the form of a honeycomb so that it could be applied to the hydrogen industrial process. When 20 wt% or more of the AS-40 binder was coated, oxidation performance of 90% or more was observed under low-concentration hydrogen conditions. It was showed through SEM analysis that long-term catalytic activity can be expected by enhancing the adhesion strength of the catalyst and preventing catalyst desorption. It is a basic research that can secure safety in a hydrogen society such as gasification, organic resource, and it can be utilized as a system that can respond to unexpected safety accidents in the future.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.4
• /
• pp.287-293
• /
• 1991

The root-mat formation of infant rice seedlings (8- to 10-day-old) is sometime not enough for machine transplanting because of the too-short nursery period. This experiment was conducted to elucidate the effect of metalaxyl seed-soaking treatment in the mixed solution of metalaxyl, seed disinfectant and insectcides on the root-mat formation of infant rice seedling in machine transplanting. The rice seeds of Odaebyeo were soaked in the mixed solution of metalaxyl, prochloraz and insectcides. with the recommended concentrations for 24 hours at room temperature. Seeding rate was 220g per seed tray (30 x 60 x 3cm). Metalaxyl (25% wettable powder), a fungicide. was used in 1. 000 times dilution as a promoting substance on the root-mat formation. Generally, the metalaxyl-treated seeds markedly increased the root number and length, and rooting activity of infant rice seedlings as compared with the control, thus the root-mat formation was excellent. When the rice seeds were sterilized by the mixed solution of prochloraz and insectcides, metalaxyl could be used together for increasing root-mat rormation of infant rice seedlIngs due to no interaction among agro-chemicals used. Seedling damping-off and physiological seedling rot were also controled in the seedlings of metalaxy-treated seeds. The root-mat of metalxyl-treated seeds had higher hardness and tension than control in terms of physical properties.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.1
• /
• pp.59-67
• /
• 1992

The duration of raising seedling of infant rice seedling(IRS) in machine transplanting is 8 to 10 days. This experiment was conducted to investigate the minimum duration of IRS's raising seedling and its method by the combination of several treatments such as plant growth regulator, root-break-seat and temperature. The rice seeds of Hwaseongbyeo was soaked in the solution of metalaxyl for 24 hours at room temperature. Metalaxyl (25% wettable powder), a fungicide, was used in 1, 000 times dilution as a promting substance on the root-mat formation of IRS. The application of fungicide in the nursery soil for the controlling of damping-off and physiologyical seedling rot was omitted due to the metalaxyl seed-soaking treatment. Seeding rate was 220g per seed tray (30$\times$60$\times$3cm). To promote the root-mat formation of IRS, the sheets of polyethylene vinyl and absorptive paper were placed bottom the seed tray. The root-mat formation of IRS was promoted at higher temperature and longer duration of raising seedling. The metalaxyl-treated seeds markedly increased the root length and rooting activity of IRS as compared with the control, thus the root-mat formation was excellent. The absorptive paper with polyethylene vinyl as root-break-seat showed a better root-mat formation compared with control, polyethylene vinyl, alone. The minimum duration of raising seedling of IRS was 5 days after sowing based on the root-mat formation and seedling height under the condition of metalaxyl seed treatment, absorptive paper with polyethylene vinyl as a root-break-seat and the raising seedling temperature 30/2$0^{\circ}C$ (day /night).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.6
• /
• pp.545-553
• /
• 1993

The metalaxyl seed-soaking treatment markedly increased the root-mat formation of the young rice seedling(8- to l0-day-old) for machine transplanting. This experiment was conducted to find out a possible rooting mechanism of the young rice seedling in relation to the exogenous metalaxyl seed-soaking treatment. The rice seeds of Hwaseongbyeo variety were soaked in the solution of metalaxyl for 24 hours at room temperature. Metalaxyl(25% wettable powder), a fungicide, was used at the concentration of 200ppm as a promoting substance on the root-mat formation of the young rice seedling. Seeding rate of the young rice seedling was 220g per seed tray(30${\times}$60${\times}$depth 3cm). Metalaxyl seed treatment was highly effective in root initiation and elongation of the young rice seedling in terms of root activity, the number and length of root, and amino acid content of roots. The exogenous metalaxyl application would also increase the chlorophyll content and photosynthetic rate in the young rice seedling. Those factors resulted in vigorous root-mat formation of the young rice seedling. In particular, alanine is a lead compound of metalaxyl which biochemically plays an important role in energy intermediate of the rice plant. Alanine conjugation with a glucose (N-${\beta}$-glucoside) is probably the mechanism in enhancement of initiation and elongation of rice roots of young rice seedling.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.2
• /
• pp.119-128
• /
• 2023

This study was examined for investigating the quality changes of spring kimchi cabbage under various treatments (pre-drying/pre-cooling, packaging types, and stacking and loading in container and pallete in the storage room) during cold storage. The results showed that control (upward stacking without pre-drying/pre-cooling and HDPE or PVC film cover) was increased significantly in weight loss and trimming loss, compared to other treatments such as DPDH (downard stacking + pre-drying + HDPE), DPDP (downard stacking + pre-drying + PVC), DPCH (downnard stacking + pre-cooling + HDPE), and UPCH (upward stacking + pre-cooling +HDPE) during storage for three months. In Sensory evaluation, judging from marketable properties, the desirable appearance of spring kimchi cabbage with the modified pallet-unit MA packed, PE, and PVC film wrapping could be maintained until 9 weeks after pre-drying/pre-cooling. Meanwhile, the control without any treatments after 6 weeks, the sensory score was declined, significantly. In general, the low temperature (10℃ and 2℃) of pre-treatment with combination of plastic film packaging in spring kimchi cabbage storage could inhibit the physiological activity and reduce the direct exposure of environmental cold air in the storage. Therefore, these two variables were the key points for extending the shelf-life of spring kimchi cabbage.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.3
• /
• pp.97-103
• /
• 2023

Barrier films for transparent packaging materials with excellent moisture barrier properties are prepared, utilizing a nanoclay dispersion coating layer formed after a pretreatment process of plasma activation surface treatment process under vacuum at room temperature. Attention is paid on optimizing the coupling additive through the appropriate crosslinking process and optimal dispersion process of the coating process to enhance adhesion. Analysis of the functional coating thin film shows that the water vapor transmission rate is less than 10 g/m²/24 hrs (ASTM F-1249) and the oxygen transmission rate is less than 30 cc/m²/24 hrs (ASTM D3985). It is shown that water barrier properties of coating thin film prepared in this study are greater than conventional untreated films by 10 times or more. The thickness of the transparent gas barrier film is within 0.1 mm, and the transparent gas barrier complex is implemented in two layers. In the study of PET thin film interface characteristics, FT-IR experimental analysis shows the reaction activity was optimized at RDS 1.125 %.