• 한국산학기술학회논문지
• /
• 제16권12호
• /
• pp.8140-8146
• /
• 2015

본 연구의 목적은 앰프 및 우퍼용 히트싱크가 장착된 400W급 자성유체 액티브 스피커의 방열성능 특성을 파악하기 위하여 엔클로저 내부의 온도 변화 특성을 실험적으로 고찰하였다. 이를 위하여 앰프 및 우퍼용 히트싱크를 설계하여 400W급 자성유체 액티브 스피커에 적용하였다. 결과적으로, 개발된 앰프 및 우퍼용 히트싱크가 장착된 400W급 자성유체 액티브 스피커의 방열성능은 개선되었고, 외기온도가 $25^{\circ}C$에서 $29^{\circ}C$로 증가함에 따라 스피커의 내부 온도는 상승하여 정상상태인 120 min경과 후 엔클로저 내부 온도는 $31.4^{\circ}C$에서 $33.2^{\circ}C$로 $1.8^{\circ}C$ 증가하였다. 또한, 본 연구에서 개발된 400W급 자성유체 액티브의 음압레벨은 기존의 액티브 스피커의 음압 레벨인 109.9 dB 보다 1.9 dB 향상된 111.8 dB로 우수하게 나타났다.

• 한국음향학회지
• /
• 제19권4호
• /
• pp.23-30
• /
• 2000

본 연구에서는 인터넷 웹 기반의 화자확인시스템을 설계하였다. 웹 기반의 화자확인 시스템에 적용할 화자인식기법을 선정하기 위해 문자종속 화자인식기법들(DTW, DHMM, SCHMM)의 성능 및 특징들을 컴퓨터 시뮬레이션을 통하여 비교 평가하였다. 컴퓨터 시뮬레이션 결과를 이용하여 웹 기반의 화자확인시스템에 적합한 인식성능 및 초기 학습발음수를 갖는 DHMM을 화자인식기법으로 선정하고 이를 분산처리환경에서 동작하도록 Activex, DCOM기술을 이용하여 3계층방식으로 설계하였다.

• 소음진동
• /
• 제4권2호
• /
• pp.187-198
• /
• 1994

This study is to describe the effects of the duct termination conditions conditions upon the active noise attenuation system. The adaptive filtering algorithm using FIR filter is implemented for duct noise attenuation. To avoid the instability caused by the acoustic feedback, two methods are considered. One is to use a compensating FIR filter. The other is to utilize uni-directional detecting microphone and uni-directional control speaker. Experimental results show that the reflections of sound from duct terminations greatly reduce the performance of ANC system. The directionality of detecting microphone and control speaker is a major factor to decide ANC performance. When there are some reflections from both duct terminations, the noise attenuation using finite FIR filter is not enough to model the duct plant. Especially, the reflection from the upstream termination reduces the noise attenuation in the frequencies related to the distance between control speaker and upstream termination. The performance of the noise attenuation is found to be largely enhanced by using uni-directional coupler, both on detecting microphone and control speaker, even if the duct system has an arbitrary termination conditions.

• 한국정밀공학회지
• /
• 제11권1호
• /
• pp.108-113
• /
• 1994

Active noise control technique has superior performance in low frequency ranges(50 .approx. 400Hz) to the conventional passive noise control technique. For the feasibility of active noise control, it is required to develop a controller which can implement control algorithm on real-time. In this study, therefore, real-time controller is developed using TMS320c25, high speed digital processor. Unlike conventional DSP board of complete ADD ON type, it is possible for the developed controller to interface with the other computer system easily by series communication for the convenience of program development. Furthermore it is designes to be separated readily as a control device. Active noise control of duct system is implemented ti evaluate a performance of developed device. Active noise control of duct system is implemented to evaluate a performance of developed controller using filtered-x LMS algorithm.

• 한국멀티미디어학회논문지
• /
• 제6권7호
• /
• pp.1131-1138
• /
• 2003

능동소음제어는 원치 않는 소음에 대하여 2차 소음으로 상쇄 간섭을 발생시켜 소음을 제거하는 방법이다. 일반적으로 능동소음제어기의 성능은 2차 소음이 주 소음을 얼마나 잘 추정하는가에 따라 결정된다. 2차 소음은 스피커를 통해 발생되며 마이크를 통해 오차 신호를 수음한다. 일반적으로 스피커와 마이크의 전달특성은 이상적이지 못하기 때문에 신호를 왜곡시켜 능동소음제어기의 성능이 저하된다. 본 논문에서는 스피커와 마이크의 전달특성을 고려한 단일센서 능동소음제어기를 제안한다. 스피커와 마이크의 전달특성에 의한 2차 소음의 왜곡을 줄이기 위하여 적응 역모델링 기법으로 전달 특성을 추정하고 주 소음은 Kalman필터를 이용하여 추정한다. 실험을 통하여 제안하는 단일센서 능동소음제어기가 효과적으로 소음을 감쇠시킴을 보인다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.247-249
• /
• 2009

This paper investigates active noise control(ANC) of a rectangular cavity using single channel filtered-x least mean square(FXLMS) algorithms to reduce interior noise globally. To obtain global reduction of the interior noise, multichannel active control should be incorporated in general. We, however, examined firstly the optimal location of the secondary speaker that produces a global reduction of the interior noise field. We then investigated the frequency characteristics of the reduction to yield the effective frequency band of the active control system. It follows that the secondary speaker should be located as close to the primary source as possible in order to obtain global reduction.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.955-956
• /
• 2014

Active noise control is noise reduction method by generate anti-phase control signal for destructive interference of through control speaker. purpose of this paper is create a virtual control source at a using the DBAP(Distance Based Amplitude Panning) algorithm which is one of the three-dimensional sound reproduction method, and verified through the experimentally for noise control method through the virtual control source. We compared active noise method by using one control speaker with active noise control method by using DBAP algorithm.

• 말소리와 음성과학
• /
• 제9권3호
• /
• pp.25-32
• /
• 2017

Besides their effect on the f0 contour of the following vowel, Korean stops are undergoing a sound change in which a partial or complete consonantal merger on voice onset time (VOT) is taking place between aspirated and lax stops. Many previous studies on sound change have mainly focused on group-normative effects, that is, effects that are representative of the population as a whole. Few systematic quantitative studies of change in adult individuals have been carried out. The current study examines whether the sound change holds for individual speakers. It focuses on inter-speaker and intra-speaker variability on sound change in contemporary Korean. Speech data were collected for thirteen Seoul Korean speakers studying abroad in America. In order to minimize the possible effects of speech production, socio-phonetic factors such as age, gender, dialect, speech rate, and L2 exposure period were controlled when recruiting participants. The results showed that, for nine out of thirteen speakers, the consonantal merger is taking place between the aspirated and lax stop in terms of VOT. There were also intra-speaker variations on the merger in three aspects: First, is the consonantal (VOT) merger between the two stops is in progress or not? Second, are VOTs for aspirated stops getting shorter or not (i.e., the aspirated-shortening process)? Third, are VOTs for lax stops getting longer or not (i.e., the lax-lengthening process)? The results of remarkable inter-speaker and intra-speaker variability indicate a synchronous speech sound change of the stop system in contemporary Korean. Some speakers are early adopters or active propagators of sound change whereas others are not. Further study is necessary to see whether the inter-speaker differences exceed intra-speaker differences in sound change.

• 한국전자통신학회논문지
• /
• 제7권1호
• /
• pp.27-31
• /
• 2012

본 논문에서는 FXLMS(Filtered-X LMS) 알고리즘을 이용하여 지향성을 가진 배열의 스피커 시스템을 구축하고 그 방사특성을 확인하였다. 배면 위치한 스피커에서 제어대상 신호의 $180^{\circ}$ 특성에 대하여 최적화 된 필터계수에 의해 제어신호를 발생시켜 제어스피커 $0^{\circ}$ 방향 특성을 간섭시켜 제어스피커 정면 $0^{\circ}$ 특성의 억제를 하도록 하였다. 이 시스템을 이용하여 장착된 배면 스피커 배열의 방사특성을 측정하였으며 제어대상 스피커의 신호가 감쇄효과를 나타나는 것을 확인하였다. 감쇄시 적응필터계수를 이용하여 배면위치 스피커의 주파수특성과 방사특성을 구한 결과, 제어점에 있어서의 감쇄는 모든 주파수 영역에서 확인되었다. 100Hz, 200Hz, 1000Hz에서의 주파수대역에서는 정면에서 $60^{\circ}{\sim}100^{\circ}$의 범위에서 감쇄효과가 나타났다.

• ETRI Journal
• /
• 제31권6호
• /
• pp.680-687
• /
• 2009

This paper reports on an improved piezoelectric microspeaker with a high sound pressure level of 90 dB, a total harmonic distortion of less than 15%, and coherence higher than 0.9. The fabricated Pb(Zr,Ti)$O_3$ (PZT) microspeakers have a thickness of only 1 mm including the speaker frame and an active area of 18 mm${\times}$20 mm. To achieve higher sound pressure and lower distortion, the PZT piezoelectric microspeaker has a well-designed speaker frame and a piezoelectric diaphragm consisting of a tilted PZT membrane and silicone buffer layer. From the simulation and measurement results, we confirmed that the silicon buffer layer can lower the first resonant frequency, which enhances the microspeaker's sound pressure at a low frequency range and can also reduce useless distortion generated by the harmonics. The fabricated PZT piezoelectric microspeakers are implemented on a multichannel speaker array system for personal acoustical space generation. The output sound pressure at a 30 cm distance away from the center of the speaker line array is 15 dB higher than the sound pressure at the neighboring region 30 degrees from the vertical axis.