• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.1
• /
• pp.1-11
• /
• 2013

Reducing the energy that consumed by tag is a key requirement for the wider acceptance of the active RFID systems that use battery constrained tags. When the reader is not interrogating, the active RFID standard protocols try to reduce energy consumption of tags by using sleep mode. On sleep mode tags is active by receiving a specific signals from reader, until tag receive a sleep mode command from the reader, a tag waste energy for remaining in RX mode. Overhearing is a state of a tag in which it wastes energy for maintaining active RX state while there is no frame destined to it. According to our analysis, the amount of energy consumed by a tag due to overhearing is several time larger than that consumed by the effective communication. We propose RANO(Reservation Aloha for No Overhearing) that is designed to inform a tag of its effective communication intervals to eliminate overhearing problem in active RFID communication. The performance of the proposed protocol was evaluated through the real world by changing the number of tags and size of data. The result of an experiment, the proposed protocol performed saving about 22 times less than the standard protocol did.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7A
• /
• pp.669-681
• /
• 2010

In this paper, we analyze the active RFID system ISO/IEC 18000-7. In order to apply to USN, which consists active RFID tags and sensor nodes, we propose UWB-based Class 4 active RFID protocol using active RFID relay tag as relay AP. To compare the performance between the existing ISO/IEC 18000-7 system and the proposed system, we introduce sensitivity-based measurement of achieved coverage and system efficiency. Also, we analyze the performance of the proposed system and compare it with that of the existing system through MCL analysis and SLS analysis.

• Journal of electromagnetic engineering and science
• /
• v.13 no.4
• /
• pp.208-213
• /
• 2013

This paper proposes a tag antenna for radio frequency identification (RFID) food system. The RFID tag antenna is designed and fabricated based on the rectangular loop concept used in the UHF band (Korean and Japanese standards, 916.7-923.5MHz). The proposed tag antenna is composed of a radiation patch, sensor tag chip, temperature sensor, oscillator, and battery. We conjugated matching between the tag antenna and the sensor tag using a U-shaped stub. Details of the proposed tag antenna design and the simulated and measured results are presented and discussed.

• Journal of Internet Computing and Services
• /
• v.8 no.3
• /
• pp.45-56
• /
• 2007

Recently, much research has been actively conducted for a new kind of network environment ubiquitous computing. This paper will define the smart-tag technology required by a ubiquitous environment. We will describe how to apply smart-tag-related Radio Frequency Identification(RFID) research for GIS in underground social infrastructure, a local-area wireless-communication technology. Application development is important that will be able to materialize a network environment. This research promotes various application developments, such reason currently it establishes the IT 839 from domestic. The geographic information system construction is a part of IT 839. The research which is various becomes accomplished for the ubiquitous of social base facility from domestic. Consequently, in this paper analyzes the geographic information system of existing, researches based RFID underground social infrastructure management system development. The Proposed method is complements the method of existing, and is efficient for underground social infrastructure. This system is new management system for underground social infrastructure, and provides safe administrator function using authentication of active RFID tag. It provides real processing and autonomy of administrator.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1039-1042
• /
• 2005

Recently, a considerable number of studies have been made on the $RFID^{[1-6]}$ systems. RFID is a technique of identifying an object using radio frequency transmission. The technology can be used to identify, track, sort or detect a wide variety of objects. The RFID system is composed of two main elements: a reader and a tag. Tags can either be active (powered by battery) or passive (powered by the reader field). The passive tags communicate back to the reader with a technique called 'backscatter'. RFID technology can be applied to the supply chain, security, logistics industry and etc. Especially, UHF RFID is worth noticing because of its relatively long identification range and commercial UHF RFID systems are under development. In this paper, we designed and implemented a UHF RFID reader firmware for ISO/IEC 18000-6 Type B specification.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1063-1066
• /
• 2005

In this paper, we developed the UHF RFID system for EPC Class1 Generation 2 specification. The RFID is a technique of identifying an object using radio frequency transmission. UHF band RFID system communication between Reader and Tag for provide the power to tag when be active when reader’s command finished the transfer. RFID technology can be applied to the supply chain, security, logistics industry and etc. Especially, UHF RFID is worth noticing because of its relatively long identification rage and commercial UHF RFID systems are under development.

• Industrial Engineering and Management Systems
• /
• v.8 no.1
• /
• pp.37-46
• /
• 2009

Patient safety has become a growing concern in health care. The U.S. Institute of Medicine (IOM) report "To Err Is Human: Building a Safer Health System" in 1999 included estimations that medical error is the eighth leading cause of death in the United States and results in up to 100,000 deaths annually. However, many adverse events and errors occur in surgical practice. Within all kinds of surgical adverse events, wrong-side/wrong-site, wrong-procedure, and wrong-patient adverse events are the most devastating, unacceptable, and often result in litigation. Much literature claims that systems must be put in place to render it essentially impossible or at least extremely difficult for human error to cause harm to patients. Hence, this research aims to develop a prototype system based on active RFID that detects and prevents errors in the OR. To fully comprehend the operating room (OR) process, multiple rounds of on site discussions were conducted. IDEF0 models were subsequently constructed for identifying the opportunity of improvement and performing before-after analysis. Based on the analysis, the architecture of the proposed RFID-based OR system was developed. An on-site survey conducted subsequently for better understanding the hardware requirement will then be illustrated. Finally, an RFID-enhanced system based on both the proposed architecture and test results was developed for gaining better control and improving the safety level of the surgical operations.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.6
• /
• pp.817-823
• /
• 2011

This paper introduces an efficient voltage multiplier circuit for improved voltage gain and power efficiency of radio frequency identification (RFID) tags. The multiplier is fully integratable and takes advantage of both passive and active circuits to reduce the required input power while yielding the desired DC voltage. A six-stage voltage multiplier and an ultralow power voltage regulator are designed in a 0.13 ${\mu}m$ complementary metal-oxide semiconductor process for 2.45 GHz RFID applications. The minimum required input power for a 1.2 V supply voltage in the case of a 50 ${\Omega}$ antenna is -20.45 dBm. The efficiency is 15.95% for a 1 $M{\Omega}$ load. The regulator consumes 129 nW DC power and maintains the reference voltage in a 1.1% range with $V_{dd}$ varying from 0.8 to 2 V. The power supply noise rejection of the regulator is 42 dB near a 2.45 GHz frequency and performs better than -32 dB from 100 Hz to 10 GHz frequencies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8A
• /
• pp.661-668
• /
• 2012

In this paper, we introduce the low power wireless communication method and propose new protocol and algorithm for wireless communication which can be applied Active RFID system. Transceiver module is composed of MCU, RF transceiver and chip antenna. and it used the lithium coin battery for power supply. The experimental result is confirmed minimum power consumption which show average $10{\mu}A$(packet transmit) and $30{\mu}A$(packet receive) per second. It can be used ultra low power wireless communication. this result is possible for using the algorithm which predict the arrival time of packet. and it indicates that are possible to prevent malfunction and enhance responsiveness.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6B
• /
• pp.618-630
• /
• 2011

Mobile RFID system, that consists of the existing RFID reader mounted on the mobile devices such as smartphones, is able to provide the users a variety of services and convenience. Although the users can get the information about a certain product anytime anywhere, there is high probability that their privacy may be violated because their belongings with RFID tags can be scanned by other mobile readers at any time. Several RFID authentication schemes have been proposed to deal with these privacy issues. However, since the existing solutions require heavy computation on the tag side, most of them is not applicable to the general low-cost passive tags which do not have any processing unit. In this paper, we propose the efficient authentication scheme for mobile RFID system applicable to the passive tags as well as the active ones by the best use of computing capability of mobile devices. The proposed scheme satisfies the import security issues such as tag protection, untraceability, anti-traffic analysis. We also implement the proposed scheme on top of real smartphone for feasibility and show the experimental results from it.