• 제목/요약/키워드: Active balancing

검색결과 147건 처리시간 0.024초

능동 복제 기반 CORBA 객체 그룹 지원 (Supporting CORBA Object Group based on Active Replication)

  • 손덕주;신범주;남궁한;진성일
    • 한국정보처리학회논문지
    • /
    • 제6권11S호
    • /
    • pp.3340-3349
    • /
    • 1999
  • Supporting object group on distributed object system give merits such as load balancing, fault tolerance and high availability. In this paper, we describe a CORBA ORB that has been designed to support object group based on active replication. The ORB supports the operational model in which it uses the IIOP for communication between client and server and total ordered multicast protocol for consistency control among group members. And through extension of ORB, it provides functions required for support of object group. Since it provides transparency of object replication, the ORB is interoperable with the existing CORBA products. It make possible for existing server application to be easily extended to application supporting object group as adding interface functions which should be used for building applications is minimized. A prototype is implemented, and performance of the replicated object group is tested and compared with a single object invocation.

  • PDF

정상인에 있어서 협근의 작용에 관한 근전도분석 (AN ELECTROMYOGRAPHIC ANALYSIS OF THE ACTION OF THE BUCCINATOR MUSCLE IN THE NORMAL SUBJECT)

  • 한장술;조한준;김유선
    • 대한치과의사협회지
    • /
    • 제9권1호
    • /
    • pp.59-62
    • /
    • 1971
  • An electromyographic analysis of the buccinator muscle was undertaken, by use of surface electrode. Electromyograms were made from 30 subjects with normal dentition during various oral activity, The results were as follows; 1. No buccinator activity was elicited during slowly opening and closing the mouth. 2. The majority of subjects showed buccinator activity while biting hard, protracting the mandible, and retracting the mandible. 3. The buccinator muscle was found to be markedly and consistently active during swallowing, blowing, sucking and masticating. 4. The buccinator activity during pulling the lips against the teeth was of equal potential with pulling the lips laterally. 5. The buccinator muscle on the working side was more active than the buccinator muscle on the balancing side.

  • PDF

IGBT소자 직렬연결 구동 연구 (A Study on Active Voltage Control of Series Connected IGBTs)

  • 홍순욱;양항준;김준모;이학성;장병훈;오관일
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 하계학술대회 논문집 F
    • /
    • pp.1966-1968
    • /
    • 1998
  • This paper describes a gate drive circuit for series connected IGBTs in high voltage applications. The proposed control criterion of the gate circuit is to actively limit the voltages during switching transients, while minimizing switching transient and losses. In order to achieve the control criterion, an analog closed loop control scheme is adopted. The performance of gate drive circuit is examined experimentally by the series connection of three IGBTs with conventional snubber circuits. The experimental results show the voltage balancing by an active control under wide variation in loads and imbalance conditions.

  • PDF

3-레벨 NPC Dual Active Bridge DC-DC 컨버터의 중성점 전압 제어를 위한 향상된 스위칭 알고리즘 (Improved Switching Algorithm for Balancing Neutral Pointed Voltage of Three-Level NPC-Based Dual Active Bridge DC-DC Converter)

  • 이준영;최현준;조진태;정지훈
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2017년도 전력전자학술대회
    • /
    • pp.235-236
    • /
    • 2017
  • 본 논문에서는 저압 직류 배전 시스템에 사용되는 3-레벨 NPC DAB 컨버터의 중성점 전압 제어를 위한 향상된 스위칭 알고리즘을 제안한다. 3-레벨 NPC DAB 컨버터는 구조상 정격전압 감소를 위해 중성점을 기준으로 DC-link 단에 두 개의 캐패시터가 사용되기 때문에 중성점으로 들어오는 전류에 불균형이 발생하며 중성점 전압이 흔들리는 문제점이 나타난다. 중성점 전압이 흔들릴 경우 불균형한 전압이 변압기에 형성되며 이로 인해 전류 Offset과 실효 전류의 증가에 따른 전력 손실증가 등 전체적인 컨버터의 동작에 악영향을 준다. 따라서 본 논문에서는 3-레벨 NPC DAB 컨버터의 동작원리 및 기존 스위칭 패턴을 분석하고, 향상된 스위칭 패턴을 적용시켜 중성점 전압을 제어하는 알고리즘의 타당성을 모의시험을 통해 검증하고자 한다.

  • PDF

단상 NPC Module- 3직렬 Cascade 구성 방식의 75KVA급 단상 지능형 변압기 개발 (Single Phase NPC Module - Development of 75KVA Single Phase Smart Transformer with 3 Serial Cascade Configuration)

  • 박주영;니이테게카;조경식;김명룡;박가우
    • 전력전자학회논문지
    • /
    • 제22권2호
    • /
    • pp.118-125
    • /
    • 2017
  • In this paper, we propose a smart transformer for a smart transformer miniature model, which can replace a 60 [Hz] single-phase transformer installed in an electric vehicle. The proposed smart transformer is lighter than a conventional transformer, can control instantaneous voltage, and can be expected to improve power quality through harmonic compensation. The proposed intelligent transformer consists of an incoming part, an AC/DC converter, and a dual active bridge. Only the incoming part and the AC/DC converter are described in this paper. The proposed intelligent transformer has 75 kVA 3.3 kV input and 750 V DC output, which are verified by simulation and experiment.

Multi-Output LED Driver Integrated with 3-Switch Converter and Passive Current Balance for Portable Applications

  • Song, Sen;Ni, Kai;Chen, Guipeng;Hu, Yihua;Yu, Dongsheng
    • Journal of Power Electronics
    • /
    • 제19권1호
    • /
    • pp.58-67
    • /
    • 2019
  • This study presents a new portable eight-output light emitting diode (LED) driver. The eight output-channels are divided into two equal groups, and their output powers can be controlled individually by three active switches. In addition, a simple capacitor-based passive current balancing circuit (CBC) is employed in each port to guarantee that the currents of the four LEDs are the same. When compared with the conventionally used separate two-output isolated converters, the proposed one uses one less active switch. Moreover, zero-voltage-switching (ZVS) is achieved, which improves the power efficiency of the driver. Finally, a highly compact prototype is built, which can reach an efficiency of 94.6%.

최소모델영역 연산자를 모델제한조건으로 적용한 2차원 MT 역산 (An Application of Minimum Support Stabilizer as a Model Constraint in Magnetotelluric 2D Inversion)

  • 이성곤
    • 한국지구과학회지
    • /
    • 제30권7호
    • /
    • pp.834-844
    • /
    • 2009
  • 본 연구에서는 최소모델영역 연산자를 MT(magnetotelluric) 2차원 역산 알고리듬에 적용하여 역산 해의 대비를 향상시키고자 하였다. 이를 위하여 creeping법에 기초한 최소자승 역산에 최소모델영역 연산자를 수치적으로 유도하여 알고리듬을 구현하였으며, 공간함수로서의 평활화 상수를 도입한 ACB (Active Constraint Balancing) 법을 동시에 적용하여 최소모델영역 연산자를 이용할 때 단점으로 지적되었던 역산 해의 안정성을 향상시켰다. 고립된 단일 이상체 모델에 대한 수치실험을 통하여 MT 역산에 있어서 최소영역 연산자의 효과를 기존의 2차 미분연산자와 비교 분석하여 MT 역산에서의 특징을 고찰하였다. 또한 다중 이상체 모델에 대한 실험을 통하여 Occam 역산과 비교하여 최소모델영역 연산자를 이용한 역산 해의 특징을 비교 분석하였으며 현장 자료에의 적용을 통하여 그 적용성을 살펴보았다.

전기비저항 탐사자료의 3차원 역산 (Three-dimensional Inversion of Resistivity Data)

  • 이명종;김정호;조성준;정승환;송윤호
    • 지구물리와물리탐사
    • /
    • 제2권4호
    • /
    • pp.191-201
    • /
    • 1999
  • 현재까지 전기비저항 탐사자료의 해석은 대부분 지하구조가 1차원 또는 2차원으로 가정하는데 근간을 두고 있다. 그러나, 국내와 같이 지질구조가 복잡하며 지형의 기복이 심한 경우, 이와 같은 가정을 사용은 전기비저항 탐사자료의 해석에 오류를 야기할 가능성이 높다. 본 연구에서는 3차원적으로 복잡하게 변화하는 지하구조 및 지형의 기복에 의한 지형효과를 정확히 계산할 수 있는 유한요소법에 의한 3차원 전기비저항 모델링 알고리듬을 근간으로 하는 역산 알고리듬을 개발하였다. 이 알고리듬은 ACB(Active Constraint Balancing)법을 채용함으로써 역산의 분해능 향상을 기하였다. 간단한 3차원 지하구조 및 지형기복에 대한 수치모형 실험결과 지표의 불규칙한 기복을 포함하여 역산을 수행함으로써 정확한 지하구조 영상을 획득할 수 있음을 보였으며, 국내의 교량건설 예정부지에서 수행된 격자망을 이룬 전기비저항 탐사자료에 대한 3차원 역산 결과 매우 신뢰도 높은 지하구조에 대한 영상을 도출할 수 있었다.

  • PDF

지반조사를 위한 3차원 전기비저항 탐사 (Three-dimensional resistivity imaging for site investigations in civil engineering)

  • 정승환;이명종;김정호;조성준;송윤호
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 1999년도 제2회 학술발표회
    • /
    • pp.21-36
    • /
    • 1999
  • 전기비저항 탐사는 국내에서 가장 성공적으로 적용되고 있는 물리탐사 기술의 하나로서 최근에는 토목 건설분야의 지반조사 등에서의 역할이 증대되고 있다. 이와 같은 역할의 증대에 따라 더욱 정확한 해석기법의 등장이 요구되었으며, 특히 국내의 경우 매우 복잡한 지질구조와 험난한 지형여건을 고려할 수 있는 해석기술이 요구되고 있다 이러한 맥락에서 최근에 3차원 전기비저항 탐사자료의 역산기술이 개발되었다. 개발된 3차원 전기비저항 역산법은 유한요소법을 이용한 3차원 전기비저항 모델링 알고리듬을 근간으로 함으로써 국내와 같이 험난한 지형 및 복잡한 지질구조에 대하여 정확한 지하구조의 3차원 영상을 제공할 수 있으며, 특히 ACB법 (Active Constraint Balancing method)의 채용으로 지하구조에 대한 분해능의 향상을 기대할 수 있게 되었다. 개발된 3차원 영상화 기술을 토대로 토목${\cdot}$건설분야의 지반조사에 3차원 전기비저항 탐사가 동원되고 있으며, 지반조사 대상지역에 있어서 중요한 지하구조에 대한 정보인 기반암 심도, 연약대 및 파쇄대 발달상황, 지하공동의 분포 등을 제공할 수 있었다.

  • PDF

완전이식형 인공심장의 심방압 균형성능의 개선에 관한 연구 (A Study On the Improvement of Atrial Pressures Balancing Performance of Total Artificial Heart)

  • 최원우;박성근;조영호;최재순;이동준;김희찬;민병구
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1995년도 추계학술대회
    • /
    • pp.216-218
    • /
    • 1995
  • A new atrial pressures balancing method for moving actuator total artificial heart(TAH) without an extra compliance chamber is developed. The structural characteristics of the pendulous moving actuator have made it possible to compensate the left and right pump output difference by utilizing the interventricular air space as an internal compliance chamber in a pump housing. Furthermore, the balancing performance is increased through the improvement of the flexibility of part of the polyurathane housing. However, the increase of the flexibility of the housing causes a little loss of the cardiac output due to the reduction of active filling performance. In this paper, a good condition between the balance and pump output performance is evaluated by adjusting the air volume in the interventricular space through a series of in vitro experiment.

  • PDF