• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.416-418
• /
• 2008

Dye-sensitized solar cell using transparent conducting oxide as electrode has large resistance such as surface resistance, charge transportation impedance in counter electrode and electrolyte, impedance between each interface. Among that resistances, surface resistance of transparent conducting oxide is relatively large. So the change of transparency has a large effect on internal resistance of dye-sensitized solar cell. Consequently, that change cause to increase or decrease the conversion efficiency. We tried to reduce the surface resistance by laser-scribing. The active area is seperated from total transparent conducting oxide by Nd:YAG laser-scribing. As a result, we achieved the improvement of efficiency about 7% and 11% in case of $0.25cm^2$ and $1.00cm^2$ dye-sensitized solar cells.

• Journal of Electrical Engineering and Technology
• /
• 제11권4호
• /
• pp.939-942
• /
• 2016

One of the most important characteristic curves of a solar cell is its current density-voltage (J-V) curve under AM1.5G insolation. Solar cell can be considered as a semiconductor diode, so a diode equivalent model was used to estimate its parameters from the J-V curve by numerical simulation. Active layer plays an important role in operation of a solar cell. We investigated the effect thicknesses and defect densities (N_d) of the active layer on the J-V curve. When the active layer thickness was varied (for N_d = 8×10¹⁷ cm^-3) from 800 nm to 100 nm, the reverse saturation current density (J_o) changed from 3.56×10^-5 A/cm² to 9.62×10^-11 A/cm² and its ideality factor (n) changed from 5.28 to 2.02. For a reduced defect density (N_d = 4×10¹⁵ cm^-3), the n remained within 1.45≤n≤1.92 for the same thickness range. A small increase in shunt resistance and almost no change in series resistance were observed in these cells. The low reverse saturation current density (J_o = 9.62×10^-11 A/cm²) and diode ideality factor (n = 2.02 or 1.45) were observed for amorphous silicon based solar cell with 100 nm thick active layer.

• The Journal of Korean Physical Therapy
• /
• 제30권5호
• /
• pp.166-172
• /
• 2018

Purpose: This study compared the different sling and resistance exercises on pelvic rotation during active straight leg raises (ASLR) and on pain in patients with chronic low back pain (CLBP). Methods: Twenty subjects were divided randomly into a sling group (SG) and a resistance exercise group (REG). Internal oblique (IO), external oblique (EO), rectus abdominis (RA), and rectus femoris (RF) muscle activity; pelvic rotation angle during ASLR; and visual analogue scale, pressure pain threshold were measured. Sling and resistance exercises were then performed for 30 minutes and the measurements taken again. Results: Both groups showed significantly lower RF muscle activity and significantly higher EO and IO muscle activity (p<0.05). The RA muscle activity decreased significantly in the SG, but increased significantly in the REG (p<0.05). The pelvic rotation angle was significantly lower in the SG (p<0.05). The pain press threshold increased significantly in both groups (p<0.05). The visual analogue scale decreased significantly in the SG (p<0.05). Conclusion: Both exercises appear to be beneficial for modifying the muscle activity and pain control in the intervention of CLBP. On the other hand, the sling was more effective in increasing the pressure threshold than resistance exercise, and the pelvic rotation angle was reduced. Therefore, both exercises can help patients with CLBP change their muscle activity and control pain. CLBP patients should use a sling for short periods of time to learn to reduce the pain and control pelvic rotation.

• Archives of Pharmacal Research
• /
• 제21권6호
• /
• pp.734-737
• /
• 1998

The hexane fractions from methanolic extracts of Anetheum graveolens L. (Umbelliferae) and Acorus gramineus Soland. (Araceae) revealed potent inhibitory activities against the resistance of multi-drug resistant Staphylococcus aureus SA2 when combined with ampicillin (Am) or chloramphenicol (Cm). As active principles, carvone and the liquid mixture containing carvone from Anetheum graveolens L. and a liquid mixture mainly consisting of benzoic acid phenyl-methyl ester (benzyl benzoate) from Acorus gramineus Soland. were identified. They showed resistance inhibition at the level of 20-50${\mu}g$/ml when combined with 100 or ${\mu}g$/ml of Am or Cm, respectively.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2004년도 The 2004 KSPP Annual Meeting & International Symposium
• /
• pp.36-38
• /
• 2004

Ethaboxam is a new fungicidal active ingredient that inhibits growth of plant pathogens specifically belonging to Oomycetes with protective, curative, systemic and translaminar activity in plants. Modes of action studies revealed that ethaboxam simultaneously inhibits cytoskeleton formation and mitochondrial respiration of Phytophthora infestans at low concentrations. There have been no indications of resistance development when tested for baseline resistance monitoring to 261 isolates of P. infestans in Korea and Europe and 150 populations of Plasmopara viticola populations in Europe for 3 years since 2000. In a selective study with vine trees artificially inoculated with P. viticola repeatedly for 10 generations in greenhouse, there have been no changes in sensitivity to ethaboxam among four natural populations of P. viticola. Furthermore, ethamoxam has not shown any cross resistance with azoxystrobin, mefenoxam, dimethomorph and cymoxanil. Based on the study results from modes of action and resistance development, ethaboxam appears to be unlikely to develop resistance in field applications.

• Geomechanics and Engineering
• /
• 제23권5호
• /
• pp.481-491
• /
• 2020

Piles installed in row(s) are used as an effective technique to improve the stability of soil slopes. The analysis of pile-stabilized slopes require a reliable prediction of lateral resistance offered by the piles. In this work, an analytical solution is developed to estimate the lateral resistance offered by the stabilizing piles in sand and c - 𝜙 soil slopes considering soil arching phenomenon. The soil arching in both horizontal direction (between the neighboring piles) and vertical direction (in the active wedge in front of the pile row) are studied and their effects are incorporated in the proposed model. The shape of soil arch is assumed to be circular and principal stress trajectories are defined separately for both modes of arching. Experimental and numerical studies found in literature were used to validate the proposed method. A detailed parametric analysis was performed to study the influence of pile diameter, center-to-center spacing, slope angle and angle of internal friction on the lateral pile resistance.

• 한국운동역학회지
• /
• 제17권4호
• /
• pp.127-139
• /
• 2007

The purpose of this study was to examine the pitching ability of baseball player by analysing the effect of elastic resistance exercise and pilates exercise on EMG. Five out of currently active highschool baseball player performed 5 times a week of elastic resistance exercise and pilates for 8 weeks, each for 100 minutes. They demonstrated significant increase in EMG after 8 weeks of exercise. Especially, in extensor carpi radialis brevis and flexor carpi radialis of fore arm, they demonstrated significant increase of inning figure after exercise. These results suggested that elastic resistance exercise and pilates exercise can improve pitching ability of baseball player according to inning.

• 한국표면공학회지
• /
• 제37권2호
• /
• pp.128-136
• /
• 2004

Effects of alloying elements on the surface characteristics of Fe-38Al intermetallic compounds were investigated using potentiostat. The specimens were casted by the vacuum arc melting. The subsequent homogenization and the stabilization led to the homogeneous DO$_3$ structure of the specimen. After the corrosion tests, the surface of the tested specimen was observed by the optical microscopy and scanning electron microscopy(SEM). For Fe-38 at.% Al intermetallic compound, the addition of Cr and Mo proved to be beneficial in decreasing the grain boundary attack by decreasing the active current density. Addition of Band Nb resulted in a higher active current density and also a higher passive current density. These results indicated the role of Cr and Mo in improving the pitting corrosion resistance of Fe-38 at.%Al intermetallic compound. Band Nb addition to Fe-38 at.%Al accelerated the granular corrosion. Fe-38 at.%Al containing Cr and Mo showed remarkably improved pitting corrosion resistance in comparison with Band Nb addition to Fe-38 at. %Al.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.157-160
• /
• 2007

The catalyst layer of a proton exchange membrane (PEM) fuel cell is a mixture of polymer, carbon, and platinum. The characteristics of the catalyst layer play critical role in determining the performance of the PEM fuel cell. This research investigates the role of catalyst layer composition using a Central Composite Design (CCD) experiment with two factors which are Nafion content and carbon loading while the platinum catalyst surface area is held constant. For each catalyst layer composition， polarization curves are measured to evaluate cell performance at common operating conditions, Electrochemical Impedance Spectroscopy (EIS), and Cyclic Voltammetry (CV) are then applied to investigate the cause of the observed variations in performance. The results show that both Nafion and carbon content significantly affect MEA performance. The ohmic resistance and active catalyst area of the cell do not correlate with catalyst layer composition, and observed variations in the cell resistance and active catalyst area produced changes in performance that were not significant relative to compositions of catalyst layers.

• Food Science and Biotechnology
• /
• 제16권5호
• /
• pp.691-709
• /
• 2007

Concerns on environmental waste problems caused by non-biodegradable petrochemical-based plastic packaging materials as well as consumer's demand for high quality food products has caused an increasing interest in developing biodegradable packaging materials using annually renewable natural biopolymers such as polysaccharides and proteins. However, inherent shortcomings of natural polymer-based packaging materials such as low mechanical properties and low water resistance are causing a major limitation for their industrial use. By the way, recent advent of nanocomposite technology rekindled interests on the use of natural biopolymers in the food packaging application. Polymer nanocomposites, especially natural biopolymer-layered silicate nanocomposites, exhibit markedly improved packaging properties due to their nanometer size dispersion. These improvements include increased mechanical strength, decreased gas permeability, and increased water resistance. Additionally, biologically active ingredients can be added to impart the desired functional properties to the resulting packaging materials. Consequently, natural biopolymer-based nanocomposite packaging materials with bio-functional properties have huge potential for application in the active food packaging industry. In this review, recent advances in the preparation and characterization of natural biopolymer-based nanocomposite films, and their potential use in food packaging applications are addressed.