• Journal of the Ergonomics Society of Korea
• /
• v.30 no.6
• /
• pp.739-747
• /
• 2011

Objective: The present study evaluated information presentation methods applicable to a wearable Braille display in terms of performance and satisfaction measures. Background: A Braille display wearable at a finger can improve accessibility of information for the blind by presenting information in real time. Method: A Braille display with six pins operated by DC servomotors was developed to simulate four information presentation methods(active, stationary, simultaneous, and sequential methods). An evaluation experiment was conducted with 16 participants(8 normal and 8 blind participants) by using three objective measures(reaction time, RT, unit: sec; recognition time, CT, unit: sec; correct response percentage, CP) and two subjective measures(overall satisfaction, OS; perception easiness, PE) with a 7-point scale. Results: The average RTs and CTs of the active and stationary methods were significantly shorter than those of the simultaneous and sequential methods for the blind participants. Also, the average CPs, OSs, and PEs of the active and sequential methods were significantly higher than those of the stationary and simultaneous methods. Conclusion: The active and sequential methods were preferred to the other methods for the blind. Application: The performance characteristics identified in the present study for the four braille display methods can be utilized to develop an effective wearable Braille display system.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1642-1645
• /
• 2007

The brightness of LED changes according to the current flowing through LEDs. The current mirror was used to drive LEDs effectively. The reference current of the current mirror was usually controlled by the resistor but the size of this resistor is very large and this resistor consumes too much power for high power LED backlight driving. The reference current of the current mirror LED driver was controlled by using flyback converter at small size with low power consumption in this paper. The concept of active current source was presented.

• Journal of Information Display
• /
• v.7 no.1
• /
• pp.35-40
• /
• 2006

Organic light-emitting diode (OLED) display panel using the charge-pump (CP) pixel addressing scheme was fabricated, and the results show that it is applicable for information display. A CP-OLED panel with 64 ${\times}$ 64 pixels consisting of thin-film capacitors and amorphous silicon Schottky diodes was fabricated using conventional thin-film processes. The pixel drive circuit passes electrical current into the OLED cell during most of the frame period as in the thin-film transistor (TFT)-based active-matrix (AM) OLED displays. In this study, the panel was operated at a voltage level of below 4 V, and this operation voltage can be reduced by eliminating the overlap capacitance between the column bus line and the common electrode.

• Journal of Platform Technology
• /
• v.6 no.4
• /
• pp.3-10
• /
• 2018

A projection-based active information display system was proposed. The proposed system is based on Intelligent Space and a steerable projector mounted mobile robot which is called Ubiquitous Display (UD). In order to transfer visual information for a human in the Intelligent Space, the UD projects a certain shape of an image with a fixed size. Due to redundancy of degree of freedom (DOF), there are lots of situations to project a same shape and size of the image on a surface. In this paper, we describe a method to determine a goal posture of the UD. Here, the goal posture is the most efficient position and orientation of the UD so as to project visual information and it is determined by the Intelligent Space. To verify the proposed method, simulation and demonstration are carried out.

• Journal of Information Display
• /
• v.12 no.1
• /
• pp.37-41
• /
• 2011

Presented herein is a novel stereoscopic three-dimensional (3D) display system with active color filter glasses. This system provides full-color 3D images by applying the time-multiplexing technique on the original anaglyph method. By switching between the opposite anaglyph statuses, a full-color anaglyph is presented. A liquid crystal panel from a 3D monitor serves as an active color filter operating at 120 Hz. A display panel and a color filter are connected to one graphic card as a dual-link system, for synchronization. To test the quality of this system, a left/right-eye image separation test and an experiment with stereoscopic images were carried out. Although there was some crosstalk and blur, the system, as expected, provided full-color 3D display. This system overcomes a monochromatic 3D image, which is the major weakness of the original anaglyph system.

• Journal of Information Display
• /
• v.10 no.4
• /
• pp.137-142
• /
• 2009

Transparent top-gate Al-Zn-Sn-O (AZTO) thin-film transistors (TFTs) with an $Al_2O_3$ protective layer (PL) on an active layer were studied, and a transparent 2.5-inch QCIF+AMOLED (active-matrix organic light-emitting diode) display panel was fabricated using an AZTO TFT backplane. The AZTO active layers were deposited via RF magnetron sputtering at room temperature, and the PL was deposited via two different atomic-layer deposition (ALD) processes. The mobility and subthreshold slope were superior in the TFTs annealed in vacuum and with oxygen plasma PLs compared to the TFTs annealed in $O_2$ and with water vapor PLs, but the bias stability of the TFTs annealed in $O_2$ and with water vapor PLs was excellent.

• Journal of Information Display
• /
• v.13 no.1
• /
• pp.21-30
• /
• 2012

Active-matrix electrophoretic display (AMEPD) is commonly used for the applications of smart handheld reading devices such as e-books and e-news. This paper presents a new reduced waveform lookup table storage method that reduces the associated lookup table by approximately 2n (n is the number of gray levels employed) times the conventional one. The paper also proposes a driving method for image display. The method provides high-speed performance for image display and also effectively eliminates the image residue, achieving high image quality. The prototyped controller was connected to a 6" AMEPD panel, whose excellent display quality demonstrated the effectiveness of the proposed controller design.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.837-840
• /
• 2007

We propose a novel digital driving method for AM-OLED (Active Matrix-Organic Light Emitting Diode) display. Proposed method modulates $V_{DD}$ so that luminance may be weighted in accordance with the bit significance. We can increase the minimum emission time or slower scan circuits are applicable by using proposed method.

• Journal of Information Display
• /
• v.7 no.4
• /
• pp.21-23
• /
• 2006

We developed a 4.5" 192${\times}$64 active matrix organic light-emitting diode display on a glass using organic thin-film transistor (OTFT) switching-arrays with two transistors and a capacitor in each sub-pixel. The OTFTs has bottom contact structure with a unique gate insulator and pentacene for the active layer. The width and length of the switching OTFT is 800${\mu}m$ and lO${\mu}m$ respectively and the driving OTFT has 1200${\mu}m$ channel width with the same channel length. On/off ratio, mobility, on-current of switching OTFT and on-current of driving OTFT were $10^6,0.3{\sim}0.5$ $cm^2$/V·sec, order of 10 ${\mu}A$ and over 100 ${\mu}A$, respectively. AMOLEDs composed of the OTFT switching arrays and OLEDs made using vacuum deposition method were fabricated and driven to make moving images, successfully.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.609-613
• /
• 2005

Advanced mobile communication devices require a bright, high information content display in a small, light-weight, low power consumption package. In this paper we will outline our progress towards developing such a low power consumption active-matrix flexible OLED ($FOLED^{TM}$) display. Our work in this area is focused on three critical enabling technologies. The first is the development of a high efficiency long-lived phosphorescent OLED ($PHOLED{TM}$) device technology, which has now proven itself to be capable of meeting the low power consumption performance requirements for mobile display applications. Secondly, is the development of flexible active matrix backplanes, and for this our team are employing poly-Si TFTs formed on metal foil substrates as this approach represents an attractive alternative to fabricating poly-Si TFTs on plastic for the realization of first generation flexible active matrix OLED displays. Unlike most plastics, metal foil substrates can withstand a large thermal load and do not require a moisture and oxygen permeation barrier. Thirdly, the key to reliable operation is to ensure that the organic materials are fully encapsulated in a package designed for repetitive flexing. We also present progress in operational lifetime of encapsulated T-PHOLED pixels on planarized metal foil and discuss PHOLED encapsulation strategy.