• Journal of Korean Vacuum Science & Technology
• /
• 제6권3호
• /
• pp.126-132
• /
• 2002

The origin of image-sticking in metal-insulator-metal type thin-film diode liquid crystal displays(TFD-LCDs) is the asymmetric current-voltage(I-V) characteristic of TFD element. We developed that TFD-LCDs have reduced-image-sticking. Tantalum pentoxide(Ta$_2$O$\sub$5/) is a candidate for use in metal-insulator-metal(MIM) capacitors in switching devices for active-matrix liquid crystal displays(AM-LCDs). High quality Ta$_2$O$\sub$5/ thin films have been obtained from anodizing method. We fabricated a TFD element using Ta$_2$O$\sub$5/ films which had perfect current-voltage symmetry characteristics. We applied novel process technologies which were postannealed whole TFD element instead of conventional annealing to the fabrication. One-Time Post-Annealing(OPTA) heat treatment process was introduced to reduce the asymmetry and shift of the I-V characteristics, respectively. OPTA means that the whole layers of lower metal, insulator, and upper metal are annealed at one time. Futhermore, in this paper, we discussed the effects of top-electrode metals and annealing conditions.

• 한국소음진동공학회논문집
• /
• 제14권5호
• /
• pp.416-423
• /
• 2004

본 연구에서는, 능동질량감쇠기가 설치된 3층 건물 축소 실험을 통해 유한요소모델에 기초한 시스템 식별기법의 유효성을 검증하였다. 입력 신호로는 능동질량감쇠기를 통해 구현되는 20개의 가우시안 백색잡음을 사용하였으며, 출력 신호로는 각층에 설치된 가속도계를 사용하여 측정된 각층 절대가속도를 사용하였다. 복소진동수응답함수를 구성한 후, 마코프(Markov) 파라메터와 시스템 행렬을 추출하였으며, 이로부터 CBSI기법을 이용하여 유한요소모델을 식별하였다. 식별된 유한요소모델과 실험을 통해 얻어진 복소응답함수는 매우 일치함을 확인할 수 있었다.

• 한국전자파학회논문지
• /
• 제13권6호
• /
• pp.528-537
• /
• 2002

본 논문에서는 능동소자를 포함하는 마이크로파 회로의 주파수 특성을 해석하기 위하여 확장된 유한차분 시간영역법 (FDTD) 을 이용했다. R, L, C와 같은 집중소자가 전송선로에 삽입된 FDTD 집중소자 모델링을 통해 하이브리드 회로 해석에 대한 기초 연구를 수행하였고, 네트워크 모델링을 이용하여 기생 커패시턴스와 인덕턴스의 값을 추출함으로써 보다 정확한 기생, 방사, 결합까지 고려하는 FDTD만의 고유한 주파수 응답을 확인할 수 있었다. 또한 FDTD를 이용하여 모델링된 다이오드를 사용한 평형 혼합기를 설계하여 상용 회로 시뮬레이터보다 정확하고 실제적인 회로의 주파수 응답을 획득하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.228-231
• /
• 2000

The active vibration control of laminated composite shell has been performed with the optimized sensor/actuator system. PVDF film is used fur the material of sensor/actuator. Finite element method is utilized to model the whole structure including the piezoelectric sensor/actuator system, The distributed selective modal sensor/actuator system is established to prevent the adverse effect of spillover. In the finite element discretization process, the nine-node shell element with five nodal degrees of freedoms is used. Electrode patterns and lamination angles of sensor/actuator are optimized using genetic algorithm. Sensor is designed to minimize the observation spillover, and actuator is designed to minimize the system energy of the control modes under a given initial condition. Modal sensor/actuator profiles are optimized for the first and the second modes suppression of singly curved cantilevered composite shell structure. Discrete LQG method is used as a control law. The real time vibration control with profile optimized sensor/actuator system has been performed. Experimental result shows successful performance of the integrated structure for the active vibration control.

• 대한기계학회논문집
• /
• 제10권1호
• /
• pp.25-33
• /
• 1986

본 연구에서는 선단요소 해법의 방법을 토대로 소형컴퓨터를 위한 비선형 유한요소의 개발을 시도한 것이다. 주로 참조한 선단요소 해법의 프로그램은 Hinton과 Owen이 작성한 프로그램이며 원판메모리를 최대로 활용하여, 활동변수를 최소화 시키므로써, 실제 소형컴퓨터인 HP-3000II(512KB) 컴퓨터에서 총 자유도가 1000정도 되는 유한요소까지는, 해석이 가능하도록 만들어지게 되었다. 이와같이 완성된 프로그램의 응용성과 신뢰성을 검토해 보기 위해서 표준 CT 시편의 유한요소 를 작성하여(124 element, 428 node, 941 freedom) 크랙선단에 형성되는 소성역의 형상과 소성변형 크기를 수치적으로 추적하여 본 결과, 실험결과와 매우 잘 일치함을 볼 수 있어서 프로그램의 신뢰성을 확인 할 수 있었다. 이때 실험은 SUS-304스테인 레스강단의 소성역을 형성시킨다음, 재결정 방법에 의해 소성역의 형상과 크기를 가시 화 및 정량화 하여서 계산결과와 비교 하였다.

• Geomechanics and Engineering
• /
• 제11권2호
• /
• pp.177-195
• /
• 2016

To secure the stability of geotechnical infrastructures and minimize failures during the construction process, a number of support systems have been introduced in the last several decades. In particular, stabilization methods using steel bars have been widely used in the field of geotechnical engineering. Rock bolt system is representative support system using steel bars. Pre-stressing has been applied to enhance reinforcement performance but can be released because of the failure of head or anchor sections. To overcome this deficiency, this paper proposes an innovative support system that can actively reinforce the weak ground along the whole structural element by introducing an active tension bolt containing a spring unit to the middle of the steel bar to increase its reinforcement capacity. In addition, the paper presents the support mechanism of the active tension bolt based on a theoretical study and employs an experimental study to validate the performance of the proposed active tension bolt based on a down-scaled model. To examine the feasibility of the active tension unit in a pillar, the paper considers a pullout test and a small-scale experimental model. The experimental results suggest the active tension bolt to be an effective support system for pillar reinforcement.

• 한국통신학회논문지
• /
• 제22권5호
• /
• pp.981-989
• /
• 1997

In this paper, the 5-element active phased array antennas coupled through slotline between elements are designed and fabricated. A recent studies on the active phased array antennas using the transmission line coupling which can be designed to provide strong coupling and the appropriate coupling phase. But this sturucture has limitation of expanding in two dimensions for planar active phased array antennas and distortion of the radiation pattern caused by coupling network. Thus our work proposes the slotline coupling structure asthe broadband coupling network for the active phased array antenna. In experiment, 5-elements active phased array antenas have steering range from -30.deg. to 20.deg. off broadside as the free-running frequencies of end elements are controlled. The overall results show that the proposed slotline coupling structure is suited for the coupling network in the actie phased array antenna system. And the proposed coupling structire solves the expansion problem and eliminates the distortion of the radiation pattern caused by the spurious radiation of the transmission line coupling network. Thus thiscan be expanded to two dimensional coupling network for the planar active phased array antenna system.

• 한국전자파학회논문지
• /
• 제29권6호
• /
• pp.449-456
• /
• 2018

본 논문에서는 마이크로파 무선전력전송에 적용될 수 있는 여러 다중 빔 형성 방법을 제안한다. 기존의 다중 빔 형성방법은 능동소자패턴(active element pattern: AEP)을 고려하지 않기 때문에 실제 시스템에 적용 시 의도한 빔 형성과 오차가 발생하게 된다. 이를 해결하기 위해 능동소자패턴의 평균을 고려하는 방법과, 변형된 푸리에 급수 방법을 통해 모든 능동소자패턴을 고려하는 방법이 제안되었다. 또한, 부엽과 null 제어를 위하여 Dolph-Tschebyscheff 방법에 중첩의 원리를 적용하여 다중 빔을 형성하는 방식을 제안하였다. 제안된 방식을 사용하여 다중 빔 형성 시 의도된 빔 형성과의 오차가 감소하는 것을 확인하였으며, 다중 빔 형성을 하며 부엽 제어를 동시에 할 수 있는 것을 확인하였다.

• Smart Structures and Systems
• /
• 제20권3호
• /
• pp.311-328
• /
• 2017

The characteristics of boundary layers have significant effects on the aerodynamic forces and vibration of the wind turbine blade. The incorporation of active trailing edge flaps (ATEF) into wind turbine blades has been proven as an effective control approach for alleviation of load and vibration. This paper is aimed at investigating the effects of external trailing edge flaps on the flow pattern and velocity distribution within a boundary layer of a NREL 5MW reference wind turbine, as well as designing a new type of velocity sensors for future validation measurements. An aeroelastic-aerodynamic simulation with FAST-AeroDyn code was conducted on the entire wind turbine structure and the modifications were made on turbine blade sections with ATEF. The results of aeroelastic-aerodynamic simulations were combined with the results of two-dimensional computational fluid dynamic simulations. From these, the velocity profile of the boundary layer as well as the thickness variation with time under the influence of a simplified load case was calculated for four different blade-flap combinations (without flap, with $-5^{\circ}$, $0^{\circ}$, and $+5^{\circ}$ flap). In conjunction with the computational modeling of the characteristics of boundary layers, a bio-inspired hair flow sensor was designed for sensing the boundary flow field surrounding the turbine blades, which ultimately aims to provide real time data to design the control scheme of the flap structure. The sensor element design and performance were analyzed using both theoretical model and finite element method. A prototype sensor element with desired bio-mimicry responses was fabricated and validated, which will be further refined for integration with the turbine blade structures.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.77-82
• /
• 2010

In this work, a new active hybrid mount featuring piezostack actuator and rubber element is proposed, and its vibration control performance is evaluated by applying a robust frequency-shaped sliding mode controller. After describing the configuration of the proposed mount, vibration control performances are experimentally evaluated. A mount system with four active hybrid mounts is then constructed. To attenuate vibrations on the supported mass, a frequency-shaped sliding mode controller is designed and implemented to the system. Finally, control performances are obtained and presented in time and frequency domains via computer simulation.