• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1345-1347
• /
• 2008

This paper described a method of determining whether arcing is present in a low-voltage wiring system. We simulated the series arcing that generated in electrical loads and fabricated a arc detection module which can discriminate between normal and arcing state. The module consists of a high-pass filter with a low cut-off frequency of 3 kHz to attenuate power frequency voltage and an active band-pass filter with a frequency of 4 kHz ${\sim}$ 8 kHz to detect series arc signals only. We tested an Incandescent lamp that was controlled by a dimmer and analysed. The module consists of a high-pass filter with a low cut-off frequency of 3 kHz to attenuate power frequency voltage by 80 dB and an active band-pass filter with a frequency of 4 kHz to detect series arc signals only. From the experimental results, we could detect series arc signals without an influence of non-linear loads.

• 한국정보통신학회논문지
• /
• 제8권4호
• /
• pp.886-893
• /
• 2004

본 논문에서는 트랜지스터를 이용해서 이득을 갖는 능동 대역 통과 필터, 부성저항 특성을 갖는 능동 공진기를 이용한 능동 공진 발진기를 설계 제작하였다. 제안된 능동 공진 발진기는 ISM 대역의 국부 발진기로 사용 가능하도록 5.5GHz의 발진주파수를 갖도록 설계하였다. 설계된 능동 공진 발진기는 유전율 3.38, 유전체 두께 0.508mm, 금속 두께 0.018mm인 기판 위에 구현하였다. 이득을 갖는 능동 대역 통과 필터를 이용한 능동 공진 발진기는 5.6GHz의 발진주파수와 -2Bm의 출력과 100kHz 옵셋에서의 위상잡음 특성은 -81dBc/Hz이다. 부성저항 특성을 갖는 능동 공진기를 이용한 능동 공진 발진기는 5.8GHZ의 발진주파수와- 4dBm의 출력과 100kHz 옵셋에서의 위상잡음 특성은 -91dBc/Hz이다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.353-354
• /
• 2014

An active vibration control technique of a time-varying cantilever beam is proposed in this study. A simple in-house coil sensor instead of expensive commercial sensors was used to measure the vibrational displacement of the beam. Active band pass filters and artificial neutral net works detect the frequencies, amplitudes, and phases of the main vibration mode. The time constants of the low pass filter representing the positive position feedback controller are updated in real-time, which generates the control voltage input to actuate the piezoelectric actuator and suppress the vibration. An experiment was successfully performed to verify the algorithm for a cantilever beam, which fundamental natural frequency arbitrarily varies between 9 Hz ~ 18 Hz. The present active vibration suppression technique can be applied to variety of structures which undergoes large variation of dynamic characteristics while operating.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2733-2736
• /
• 2003

This paper proposes a dry-type active surface EMG electrode for the myoelectric prosthetic hand. The designed electrode is small size for embedding in the socket of prosthetic hand, and it has three leads including the reference of signal. To acquire EMG signal rejected the power noise, a precision differential amplifier and various filters such as the band pass filter band rejection filter, low pass and high pass filter are embedded on the electrode. The final output of the electrode is integrated absolute EMG (IEMG) obtained by full rectifier and moving average circuits. From experimental results using the implemented dry-type active surface EMG electrode, the proposed electrode is feasible for the myoelectric prosthetic hand.

• 대한전자공학회논문지
• /
• 제8권5호
• /
• pp.20-26
• /
• 1971

대역통과여파기는 전달함수에 의한 진동감쇄율과 복소평면을 이용한 극좌표 응답도로써 그 특성이 설명되어 왔으나 여파기를 실제로 사용할 때에 시간에 대한 응답이 중요한 문제로 나타나는바 저주파대에서의 대역통과 여파기의 시간에 대한 응답특성을 구하고 다음단의 회로동작에 영향을 주는 요인들의 함수관계를 Analog전자계산기로 구성한 2차식 RC 능동여파기에 의해 밝혔다.

• 한국정보통신학회논문지
• /
• 제17권10호
• /
• pp.2395-2402
• /
• 2013

본 논문에서는 40MHz의 대역폭과 개선된 선형성을 가지는 active-RC channel selection filter (CSF)가 제안된다. 제안되는 CSF는 5차 butterworth 필터로써 한 단의 1차 low pass 필터와 두 단의 biquad 기반의 2차 low pass 필터, 그리고 DC offset 제거를 위한 DC 피드백 회로로 구성된다. CSF의 선형성을 개선하기 위해 스위치로 사용되는 MOSFET의 body를 source 노드로 연결한다. 설계된 CSF의 대역폭은 10MHz, 20MHz, 그리고 40MHz로 선택될 수 있으며, 전압 이득은 0dB에서 24dB까지 6dB의 단위로 조정된다. 제안된 CSF는 1.2V 40nm의 1-poly 8-metal CMOS 공정에서 설계된다. 설계된 CSF가 40MHz의 대역폭과 0dB의 gain을 가질 때, OIP3는 31.33dBm이고 in-band ripple은 1.046dB, IRN는 39.81nV/sqrt(Hz)로 시뮬레이션 검증되었다. CSF의 면적과 전력소모는 각각 $450{\times}210{\mu}m^2$와 6.71mW 이다.

• Smart Structures and Systems
• /
• 제22권1호
• /
• pp.95-103
• /
• 2018

Active vibration control via inertial mass actuators has been shown as an effective tool to significantly reduce human-induced vertical vibrations, allowing structures to satisfy vibration serviceability limits. However, a lot of practical obstacles have to be solved before experimental implementations. This has motivated simple control techniques, such as direct velocity feedback control (DVFC), which is implemented in practice by integrating the signal of an accelerometer with a band-pass filter working as a lossy integrator. This work provides practical guidelines for the tuning of DVFC considering the damping performance, inertial mass actuator limitations, such as stroke and force saturation, as well as the stability margins of the closed-loop system. Experimental results on a full scale steel-concrete composite structure (behaves similar to a footbridge) with adjustable span are reported to illustrate the main conclusions of this work.

• Journal of Power Electronics
• /
• 제8권1호
• /
• pp.91-100
• /
• 2008

The d-q harmonic detecting algorithms are dominant methods to generate current references for active power filters (APF). They are often implemented in the synchronous frame and time domain. This paper researches the frequency characteristics of d-q synchronous transformations, which are closely related to the analysis and design issues of control system. Intuitively, the synchronous transformation is explained with amplitude modulation (AM) in this paper. Then, the synchronous filter is proven to be a time-invariant and linear system, and its transfer function matrix is derived in the stationary frames. These frequency-domain models imply that the synchronous transformation has an equivalent effect of frequency transformation. It is because of this feature, the d-q method achieves band-pass characteristics with the low pass filters in the synchronous frame at run time. To simplify these analytical models, an instantaneous positive-negative sequence frame is proposed as expansion of traditional symmetrical components theory. Furthermore, the synchronous filter is compared with the traditional bind-pass filters based on these frequency-domain analytical models. The d-q harmonic detection methods are also improved to eliminate the inherent coupling effect of synchronous transformation. Typical examples are given to verify previous analysis and comparison. Simulation and experimental results are also provided for verification.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1972-1974
• /
• 2004

This paper describes the high pass filter with notch charecteristics. The proposed circuits configuration consists of two uniformly distributed RC line (herein after is called URC) and two gain amplifiers ($K_1$ and $K_2$). With the appropriate $K_1$ and $K_2$ , the circuit has a steeper slope of magnitude response at pass band steeper than using a single gain amplifier.

• 전력전자학회논문지
• /
• 제19권4호
• /
• pp.312-319
• /
• 2014

When distributed generation such as a wind power system is connected to the grid, it should meet grid requirements like IEEE Std. 1547, which regulates the anti-islanding method. Since the islanding may cause damage on electrical equipments or safety hazards for utility line worker, a distributed generation should detect it as soon as possible. This paper proposes a hybrid anti-islanding method coupled with the active and passive detection methods. To enhance the harmonic extraction capability for an active harmonic injection method, cascaded second-order band-pass filter and signal processing scheme are employed. Simulation and experiments are carried out under the islanding test condition specified in IEEE Std. 1547. Passive over/under voltage and over/under frequency methods are combined with the active method to improve the detection speed under certain condition. The simulation and experimental results are presented to verify that the proposed hybrid anti-islanding method can effectively detect the islanding.