• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.2797-2820
• /
• 2015

In order to accommodate huge number of antennas in a limited antenna size, a large scale antenna array is expected to have a three dimensional (3D) array structure. By using the Active Antenna Systems (AAS), the weights of the antenna elements arranged vertically could be configured adaptively. Then, a degree of freedom (DOF) in the vertical plane is provided for system design. So the three-dimension MIMO (3D MIMO) could be realized to solve the actual implementation problem of the massive MIMO. However, in 3D massive MIMO systems, the pilot contamination problem studied in 2D massive MIMO systems and the inter-cell interference as well as inter-vertical sector interference in 3D MIMO systems with vertical sectorization exist simultaneously, when the number of antenna is not large enough. This paper investigates the interference management towards the above challenges in 3D massive MIMO systems. Here, vertical sectorization based on vertical beamforming is included in the concerned systems. Firstly, a cooperative joint vertical beams adjustment and pilot assignment scheme is developed to improve the channel estimation precision of the uplink with pilots being reused across the vertical sectors. Secondly, a downlink interference coordination scheme by jointly controlling weight vectors and power of vertical beams is proposed, where the estimated channel state information is used in the optimization modelling, and the performance loss induced by pilot contamination could be compensated in some degree. Simulation results show that the proposed joint optimization algorithm with controllable vertical beams' weight vectors outperforms the method combining downtilts adjustment and power allocation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1233-1241
• /
• 2008

We design, fabricate, and measure a MIMO antenna system mountable on a small PCB (such as UMPC). The proposed antenna system accommodates three radiation elements on the PCB area of $40mm\;{\times}\;100mm$. Two of them employ a slot type and one uses a modified monopole with an inverted L shape expecting high isolation and polarization purity. The bandwidth of each proposed MIMO antenna ranges from 80MHz and 200MHz at the center frequency of 1.8 GHz. The isolations between ports have been found to be greater than 10dB over the interested frequency band. Besides, the proposed MIMO system has been evaluated in terms of ARC(Active Reflection Coefficient, TARC(Total ARC), correlation, MEG, and etc. The envelope correlation is calculated to be much less than 0.04 and the ratio of the mean effective gain(MEG) between the antennas is found to be close to unity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6C
• /
• pp.883-892
• /
• 2004

Recently, in order to improve high speed data transmission and spectral efficiency in wireless communication systems, the study on the combination OFDM and space-time coding is active. Also, a solution to improve system capacity in multiuser systems is to use adaptive antennas. In a system using STBC, the signals transmitted from two transmit antennas are superposed at the receive antenna and the interference between two transmit antennas of a user occures. Thus it is difficult to apply the conventional beamforming techniques for single antenna to the systems using space-time coding. In this Paper, we present the MMSE beanforming technique using training sequence for STBC-OFDM systems in reverse link and evaluate the performance by using various parameters in TU and HT channels.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.12
• /
• pp.1-8
• /
• 2000

The analysis of cavity-backed circular microstrip antenna is performed, based on the method of moments, and verified with experimental results. The proposed algorithm was used to analyze the return loss and radiation characteristics of antenna by the variation of each associated parameter. This result was used to provide the optimum design guideline. Finally active reflection coefficient of infinite cavity-backed microstrip away was calculated to show the effect of suppressing surface wave to eliminate scan blindness.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.636-643
• /
• 2023

In this paper, a high-speed calibration method for phased array antennas in the far-field is presented A max calibration, which is a simplification of the rotating-element electric-field vector (REV) method that calibrates each antenna element only through received power, and a method of grouping calibrations by sub-array unit rather than each antenna element were proposed. Using the Proximal Policy Optimization (PPO) algorithm, we found a partitioning optimized for the distribution of phased array antennas and calibrated it on a subarray basis. An adaptive max calibration method that allows faster calibration than the conventional method was proposed and verified through simulation. Not only is the gain of the phased array antenna higher while calibration is being made to the target, but the beam pattern is closer to the ideal beam pattern than the conventional method.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.3
• /
• pp.407-416
• /
• 2021

An active phased array antennas can not only electrically steer the beam by controlling the weighting of the excitation signal, but can also form a pattern null in the direction of the interference source. The weight of the excitation signal to steer the main beam can be easily calculated based on the position of the radiating element. In addition, the weight of the excited signal for pattern null formation can also be calculated by setting the required radiation pattern and using WLSM(Weighted Least Squares Method). However, in a general wireless communication network environment, the location of the interference source is unknown. Therefore, an adaptive pattern null synthesis is needed. In this paper, it was confirmed that pattern null synthesis according to the required radiation characteristic was possible. And based on this, adaptive pattern null synthesis into the direction of an interference source was studied using a binary search algorithm based on observation area. As a result of conducting a simulation based on the presented technique, it was confirmed that adaptive pattern null forming into the direction of an interference is possible in efficient way.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.2
• /
• pp.55-67
• /
• 2003

본 고에서는 차세대 무선통신용 초소형 단말기 구현에서 RF 시스템의 성능 개선에 크게 기여하게 될 RF 집적형 안테나 기술 현황과 향후 발전 방향이 제시된다. 고성능을 유지하면서 초소형 RF 전치단을 실현하기 위한 능동소자와 안테나가 결합하여 복합 기능을 하는 능동 집적 안테나(AIA, Active Integrated Antenna) 기술 현황, RF 시스템 단일 패키지(RF-SOP, System On Package) 형태에 집적 가능한 안테나 및 미래의 꿈인 RF 시스템 단일 칩 (RF-SOC, System On Chip)을 향한 단일 칩 안테나 (AOC, antenna on chip) 기술 동향 등이 기술된다.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1335-1338
• /
• 2002

This paper presents the analysis of the required limit on a multibeam active phased array antenna (APAA) aperture using the statistical simulation for a High Altitude Platform Station (HAPS). The simulation takes into account the random errors caused by the non-identity of the array elements and the inaccuracy of the antenna calibration. The results of our statistical simulation show that the strict requirements on the sidelobe envelope for HAPSs can be met when the amplitude and phase distribution errors are minor, a condition which may be achieved by using digital beam forming.

• Carbon letters
• /
• v.13 no.1
• /
• pp.17-22
• /
• 2012

Currently, graphene is a topic of very active research in fields from science to potential applications. For various radio-frequency (RF) circuit applications including low-noise amplifiers, the unique ambipolar nature of graphene field-effect transistors can be utilized for high-performance frequency multipliers, mixers and high-speed radiometers. Potential integration of graphene on Silicon substrates with complementary metal-oxide-semiconductor compatibility would also benefit future RF systems. The future success of the RF circuit applications depends on vertical and lateral scaling of graphene metal-oxide-semiconductor field-effect transistors to minimize parasitics and improve gate modulation efficiency in the channel. In this paper, we highlight recent progress in graphene materials, devices, and circuits for RF applications. For passive RF applications, we show its transparent electromagnetic shielding in Ku-band and transparent antenna, where its success depends on quality of materials. We also attempt to discuss future applications and challenges of graphene.

• Journal of electromagnetic engineering and science
• /
• v.16 no.3
• /
• pp.169-181
• /
• 2016

This work presents a new method for enhancing the performance of a dual band Planer Inverted-F Antenna (PIFA) and its lumped equivalent circuit formulation. The performance of a PIFA in terms of return loss, bandwidth, gain, and efficiency is improved with the addition of the proposed open stub in the radiating element of the PIFA without disturbing the operating resonance frequencies of the antenna. In specific cases, various simulated and fabricated PIFA models illustrate that the return loss, bandwidth, gain, and efficiency values of antennas with longer optimum open stub lengths can be enhanced up to 4.6 dB, 17%, 1.8 dBi, and 12.4% respectively, when compared with models that do not have open stubs. The proposed open stub is small and does not interfere with the surrounding active modules; therefore, this method is extremely attractive from a practical implementation point of view. The second presented work is a simple procedure for the development of a lumped equivalent circuit model of a dual band PIFA using the rational approximation of its frequency domain response. In this method, the PIFA's measured frequency response is approximated to a rational function using a vector fitting technique and then electrical circuit parameters are extracted from it. The measured results show good agreement with the electrical circuit results. A correlation study between circuit elements and physical open stub lengths in various antenna models is also discussed in detail; this information could be useful for the enhancement of the performance of a PIFA as well as for its systematic design. The computed radiated power obtained using the electrical model is in agreement with the radiated power results obtained through the full wave electromagnetic simulations of the antenna models. The presented approach offers the advantage of saving computation time for full wave EM simulations. In addition, the electrical circuit depicting almost perfect characteristics for return loss and radiated power can be shared with antenna users without sharing the actual antenna structure in cases involving confidentiality limitations.