• Title/Summary/Keyword: Activated Alumina

Search Result 78, Processing Time 0.026 seconds

Adsorption of Ruthenium on the alkaline Earth Metal Compounds (알카리토금속 화합물에 의한 루테늄의 흡착)

  • 류경옥;문세기;이근범
    • Journal of the Korean Ceramic Society
    • /
    • v.19 no.2
    • /
    • pp.145-151
    • /
    • 1982
  • Many materials such as silica gel, metallic oxide, activated alumina and alkaline earth metal carbonates were employed as filter media for gaseous oxides of ruthenium volatilized during high level radioactive waste processing. The adsorption efficiency of ruthenium on these materials was evaluated. For the purpose of observing behavior of ruthenium oxides, thermogravimetric analysis of ruthenium oxide in a stream of oxygen was carried out. The rate of volatilization was proportional to the square root of oxygen partial pressure, and increased exponentially with temperature. At $650^{\circ}C$, gaseous ruthenium oxides showed a strongly marked effect of deposition. Of all the materials available, calcium oxide proved to be the best that could be used to adsorb ruthenium.

  • PDF

Studies on the Anthelmintic constituents of Gelidium amansii. (우무가사리(Gelidium amansii)의 구충성분에 대하여(제 1 보))

  • 서석수;홍승철
    • YAKHAK HOEJI
    • /
    • v.6 no.2
    • /
    • pp.1-6
    • /
    • 1962
  • Clinical tests revealed that the extracts of Gelidium amansii (Gelidiaceae) had a anthelmintic action and further examinations were made on the anthelmintic components of this seaweed. This anthelmintic principle is absorbed on alumina and eluted from it by alkali solution. The active principle is absorbed on activated carbon from aqueous extract and eluted from it by methanol and it is not adsorbed on Amberite IR-120(H-form). This anthelmintic effective fraction was prepared by the use of this properties. Action of the active principle of Gelidium amansii was examined pharmacologically. The active principle of Gelidium amansii was found to decrease the tensity, tonus and mobility of Eisenia foetida(Savigny) nerve muscles. The active principle of this effective fraction was submitted to paper chromatography and spots to ninhydrin were detected at Rf; 0.30-0.31(yellow), 0.26(violet), 0.2(violet), 0.14-0.13(violet), 0.9(orange) and 0.04(violet).

  • PDF

Detection of Anthelmintic Components of Sargassum thunbergii $K_{UNTZE}$ (I) (해호미 구충성분의 검색 ( I ))

  • Lee, Wan-Ha;Min, Kyung-Nak
    • Korean Journal of Pharmacognosy
    • /
    • v.1 no.2
    • /
    • pp.19-22
    • /
    • 1970
  • It was found that the extracts of Sargassum thumbergii (Sargassaceae) had an anthelmintic action on Ascaris suilla and further examinations were made on the anthelmintic compounds of the seaweed. The anthelmintic principle is soluble in water, adsorbed in aqueous extract with activated carbon and eluted from the carbon with 90% aqueous methanol solution. But it is not adsorbed on alumina and amberite IR-120 (H-type). The anthelmintic fractions were prepared by the use of these properties. The active principle of Sargassum thunbergii was pharmacologically examined and was found to decrease the tenisty, tonus, mobility and amplitude of Eisenia foetida nerve muscles. The active principle was subjected to paper partition chromatography but yellow spot to ninhydrin was not revealed.

  • PDF

필터시스템을 이용한 비소처리흡착제의 성능비교분석

  • Bang Seon-Taek;Kim Ju-Yong;Kim Gyeong-Ung
    • Proceedings of the Korean Society of Soil and Groundwater Environment Conference
    • /
    • 2005.04a
    • /
    • pp.13-16
    • /
    • 2005
  • Laboratory and field experiments were conducted to study the effectiveness of five adsorbents for the removal of arsenic. The adsorbents included activated alumina (AA), iron coated AA (ICAA), and granular ferric hydroxide (GFH), granular ferric oxide (GFO), and granular titanium dioxide (GTD). Laboratory experiments were conducted to investigate arsenic removal using challenge water prepared in accordance with NSF International Standards 53 (ANSl/NSF 53-2001). Field experiments were conducted using arsenic-contaminated groundwater In laboratory experiment, the treatment capacity decreased in the following order GTD > GFO > GFH. In contrast, the treatment capacity decreased in the following order GFO > GTD > GFH > ICAA > Ah in field experiments.

  • PDF

Analysis of Siloxane Adsorption Characteristics Using Response Surface Methodology

  • Park, Jin-Kyu;Lee, Gyeung-Mi;Lee, Chae-Young;Hur, Kwang-Beom;Lee, Nam-Hoon
    • Environmental Engineering Research
    • /
    • v.17 no.2
    • /
    • pp.117-122
    • /
    • 2012
  • A central composite design and response surface methodology were applied to investigate the optimum conditions for maximum adsorption capacity in activated alumina as an adsorbent. The optimized conditions were determined for adsorption capacity using variables of flow rate and temperature. It was found that flow rate and temperature greatly influenced the adsorption capacity, as determined by analysis of variance analysis of these variables. Statistical checks indicated that second order polynomial equations were adequate for representing the experimental values. The optimum conditions for adsorption capacity were $0^{\circ}C$ and 2,718 mL/min, with the estimated maximum adsorption capacity of 17.82%. The experimental adsorption capacity was 17.75% under these optimum conditions, which was in agreement with the predicted value of 17.82%.

The Evaluation of CO Adsorbents Used in PSA Process for the Purification of Reformed Hydrogen (개질 수소 정제용 PSA 공정을 위한 CO 흡착제의 성능 평가)

  • PARK, JIN-NAM
    • Transactions of the Korean hydrogen and new energy society
    • /
    • v.27 no.6
    • /
    • pp.628-635
    • /
    • 2016
  • Natural gas reformed hydrogen is used as a fuel of fuel cell vehicle, PSA process is used for the purification of reformed hydrogen. In this study, the performance of CO adsorbent in PSA process was evaluated. Zeolite adsorbents used in the commercial PSA process is used. The physical and chemical properties of adsorbents were characterized using BET apparatus, XRD, and FE-SEM. The breakthrough apparatus modified from GC was used for the CO breakthrough experiment, the quantitative analysis of CO adsorption capacity was performed using CO breakthrough curve. Zeolite 10X and 13X showed superior CO adsorption capacity than activated alumina. The CO adsorption capacity of zeolite 10X is more than twice of zeolite 13X even the BET surface area is low. It seems that the presence of $Ca^{2+}$ cation in zeolite 10X is beneficial to the adsorption of CO.

A Study for Recoverability of Iron Resource in Red Mud (레드머드 내 철 자원 회수 가능성 고찰)

  • Kim, Bong-Ju;Kwon, Jang-Soon;Koh, Yong-Kwon;Park, Cheon-Young
    • Economic and Environmental Geology
    • /
    • v.53 no.3
    • /
    • pp.297-306
    • /
    • 2020
  • The red mud generated from bauxite during the Bayer alumina production process has been regarded as an industrial waste due to the high alkaline property and high content of Na. Despite of its environmental problem, various studies for recovery of the valuable resources from red mud has been also carried out because of high content (25.7 wt.% as Fe2O3 in this study) of iron in red mud. In order to recover the iron resource in the red mud, microwave heating experiments were performed with adding of activated carbon and elemental sulfur to the red mud. Through the microwave heating the powdered red mud mixtures converted to porous and vitrified solid aggregates. The vitrified aggregates produced by microwave heating are composed of goethite, zero valent iron (Fe0), pyrrhotite and pyrite. And then, the microwave heating samples were dissolved in the aqua regia solution, and Fe precipitates were obtained as a Fe-chlorides by adding of NaCl salt in the aqua regia solution. The Fe recovery rates in the Fe-chloride precipitates showed differences depending on the experimental mixture conditions, and Fe grades of the end products are 49.0 wt.%, 58.0 wt.% and 59.5 wt.% under mixture conditions of red mud, red mud + activated carbon, and red mud + activated carbon + elemental S, respectively. The Fe content of 56.0 wt.% is generally known as the grade value of Fe in a iron ore for iron production, and the Fe grades of microwave heating samples with adding activated carbon and elemental S in this study are higher than the grade value of 56.0 wt.%.

Carbonation Characteristics of Alkali Activated Blast-Furnace Slag Mortar (알칼리활성 고로슬래그 모르타르의 탄산화 특성)

  • Song, Keum-Il;Yang, Keun-Hyeok;Lee, Bang-Yeon;Song, Jin-Kyu
    • Journal of the Korea Concrete Institute
    • /
    • v.24 no.3
    • /
    • pp.315-322
    • /
    • 2012
  • Alkali-activated slag (AAS) is the most obvious alternative materials that can replace OPC. But, AAS industrial usage as a structural material should be evaluated for its durability. Carbonation resistance is one of the most important factors in durability evaluation. Test results for 18 slag-based mortars activated by sodium silicate and 6 OPC mortars were obtained in this study to verify the carbonation property. Main variables considered in the study were flow, compressive strength before and after carbonation, and carbonation depth. Mineralogical and micro-structural analysis of OPC and AAS specimens prior to and after carbonation was conducted using XRD, TGA, FTIR FE-SEM. Test results showed that CHS was major hydration products of AAS and, unlike OPC, no other hydration products were found. After carbonation, CSH of hydration product in AAS turned into an amorphous silica gel, and alumina compounds was not detected. From the analysis of the results, it was estimated that the micro-structures of CSH in AAS easily collapsed during carbonation. Also, the results showed that this collapse of chemical chain of CSH lowered the compressive strength of concrete after carbonation. By increasing the dosage of activators, carbonation resistance and compressive strength were effectively improved.

Study on Carbon Dioxide Control by Using Dry Sorbent in Fludized Bed (유동층에서 dry sorbent를 이용한 CO2 제어에 관한 연구)

  • Lee, Sang-Sup;Kim, Min-Choul;Yoo, Jeong-Seok;Moon, Gil-Ho;Oh, Kwang-Joong
    • Clean Technology
    • /
    • v.9 no.4
    • /
    • pp.179-187
    • /
    • 2003
  • The technology of fluidized bed to use dry sorbent can be new technology that reduce the operating cost and make efficient operation. Therefore, this study investigated $CO_2$ control by dry sorbents with operating variables in a fluidized bed, compared with fixed bed for $CO_2$ adsorption capacity and pressure drop, and presented the $CO_2$ adsorption capacity of activated carbon, molecular sieve 5A, molecular sieve 13X, and activated alumina. As the results of this study, the basic data could be achieved for operation of fluidized bed process, and fluidized bed process presented relatively high $CO_2$ adsorption capacity and low pressure drop with the increase of gas velocity. In addition, molecular sieve 5A showed 1.1~3.0-fold later breakthrough point and 1.1~2.7-fold higher adsorption capacity than the other dry sorbents.

  • PDF

Study on the Preparation of Inorganic Composite Membrane and Characteristics of Gas Separation of Zirconium Modified Polycarbosilane via Pyrolysis (지르코늄 혼성 폴리카르보실란의 열분해에 의한 무기 복합막 제조 및 기체분리 특성 연구)

  • Kang, Phil Hyun;Lee, Kew Ho;Yang, Hyun Soo
    • Applied Chemistry for Engineering
    • /
    • v.10 no.8
    • /
    • pp.1099-1103
    • /
    • 1999
  • The surface of an ${\alpha}$-alumina tube was coated with zirconium modified polycarbosilane(PZC) by dip-coating method. Then the tube was pyrolyzed at 573~823 K. The prepared inorganic composite membrane was in $1{\mu}m$ thickness and had no pinholes larger than several nm. For the pyrolyzed inorganic composite membrane, the permeation test of He, $N_2$, $CO_2$, and $O_2$ was performed at 303~423 K. The gas permeation and separation factor were increased with increasing permeation temperature. The permeation for gases was controlled by the activated diffusion mechanism. The separation factor of $CO_2$, to $N_2$was 4.9 at 363 K on the composite membrane pyrolyzed at 823 K and its value was higher than that of He and $O_2$.

  • PDF