• 한국산업보건학회지
• /
• 제16권2호
• /
• pp.161-171
• /
• 2006

The objectives of this study were to ergonomically evaluate varying tasks performed in a general hospital and to propose their improving measures based on the evaluation results. The tasks found in the hospital were largely classified into two groups of manual materials handling and awkward posture related tasks. Ergonomic tools of NLE, 3-D SSPP and RULA were used for evaluating workload of the tasks. The major findings are: 1) L5/S1 compressive force of patient transferring by one person exceeded the maximum permissible limit(6,400N) by NIOSH. The L5/S1 compressive forces for most of the patient transferring tasks by 2-4 persons were larger than the action limit (3,400N), and the tasks by five persons were analyzed to be safe in the view of L5/S1 compressive force; 2) patient repositioning tasks by 2-3 persons were hazardous on the basis of L5/S1 compressive force, while most of the tasks by 4-5 persons were safe; 3) many tasks performed in wards were found to be stressful, most of which resulted from improper heights of their working tables or working points. Of varying tasks in general hospitals, patient transferring was the most stressful. Based on the results of this study and high prevalence of musculoskeletal disorders from other studies, it is recommended that the ergonomics program be introduced and enforced for doing improving activities systematically

• 약학회지
• /
• 제55권2호
• /
• pp.81-90
• /
• 2011

Most antineoplastic agents are nonselective in their mechanism of action, affecting noncancerous as well as cancerous cells, and resulting in acute effects such as irritation of mucous membranes and chronic effects such as genotoxicity, teratogenicity, and carcinogenicity. Healthcare workers occupationally exposed to antineoplastic agents are at risk. The present study aimed to develop and apply methods to monitor occupational exposure to antineoplastic agents, using cyclophosphamide (CP) as the model compound. To monitor environmental and biological exposure, potentially contaminated surfaces were wiped and 24 hour urine samples were collected from workers. Liquid chromatography combined with tandem mass spectrometry was performed, with a limit of detection of 0.05 ng/ml. Measurable amounts of CP were detected on 92% of the sampled surfaces, with a geometric mean of 175.22 $ng/m^2$. Despite the environmental contamination of the model compound, CP was below the detection limit in all urine samples. If workplace contamination cannot be completely avoided, it is importance to reduce exposure to the lowest possible levels. To this aim, efforts to minimize occupational exposure along with biological and environmental monitoring are required. The standardized sampling techniques, and specific and sensitive analytical methods reported in this study may be helpful in assessing occupational exposure and devising strategies to reduce exposure.

• 한국게임학회 논문지
• /
• 제17권3호
• /
• pp.107-116
• /
• 2017

샌드박스 게임은 높은 자유도를 기반으로 사용자 스스로 다양한 플레이패턴을 재창조하며 만족을 배가시킨다. 이러한 창조적 과정은 '커스터마이징'과 '행동자율성'을 통한 놀이의 확장성에 기인한다. 이는 즐거움을 느끼는 요소가 과정지향적이라는 말로 대변될 수 있다. 본고는 샌드박스형 게임이 다중경쟁 환경에서 가지는 구조적한계를 규명하고자 한다. 스텐드어론 기반에서는 다양한 커스터마이징을 통한 자유도의 확장성이 유저에게 월드지속성에 강한 동기를 부여한다. 반면 MMORPG와 같은 온라인 샌드박스 게임물에서는 다수유저의 경쟁 우위를 점하고자하는 목적지향적 성향이 샌드 박스형 게임 본연의 자유도와 확장성을 구사할 수 없는 태생적 한계임을 확인하였다. 본 연구에서는 온라인 기반의 샌드박스형 게임의 자유도와 확장성의 효용이 상쇄되는 원인과 성장한계를 옵티멀솔루션 요소에 기인함을 제시할 수 있었다.

• 한국환경보건학회지
• /
• 제34권4호
• /
• pp.279-284
• /
• 2008

This paper aims to provide basic data for work environment control, prevention of worker exposure to asbestos and improvement of air quality to protect workers ‘health after measuring the level of airborne asbestos and workers' exposure in a shipbuilding repair businesses. For this study, a total of 27 samples were collected from 27 workers who had been exposed to asbestos during engine, piping, boiler and other manufacturing processes in 'A' Shipbuilding Repair Company in Gyeongnam. This research was conducted from Oct. 1 to 30, 2007 and had the following results: The target group (27 workers) consisted of all men with an average age of 35.9 years and 6.6 years of work on average. Among them, fifteen 15 (55.6%) were smokers. In terms of their duties at work, there were 12 plumbing repair engineers (44.4%), 8 boiler repair engineers (29.6%) and 7 engine engineers (25.9%). The geometric mean concentration of airborne asbestos was 0.004 f/cc. A total of 4 samples exceeded the exposure limit. In particular, three exceeded the legal limit by more than double, which means that some workers have been highly exposed to asbestos. In terms of the concentration of asbestos fibres by work process, plumbing repair was the highest (0.0071 f/cc($0.001{\sim}0.57\;f/cc$)) while boiler was the lowest (0.0015 f/cc($0.001{\sim}0.007\;f/cc$)). Based on this study, proper action needs to be taken as soon as possible to protect workers from the threat of asbestos.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.635-638
• /
• 2009

최근 디지털 아트는 이미지, 사운드, 시뮬레이션, 3차원 홀로그래피 등의 다양한 디지털 미디어를 활용하여 새로운 분야의 예술이 시도되고 있다. 이런 수많은 디지털 아트는 전시관이라는 제한된 장소와 제한된 기간에만 관객들과 접하고 있는 상황이다. 하지만 디지털 아트는 디지털 형태의 미디어를 이용할 수 있는 공간이면 실내외 어디든 활용 가능성이 있다. 본 논문에서는 디지털 아트를 활용하여 실내공간디자인에 하기 위하여 필요한 상호작용성에 대해 분석하고, 인터랙티브 기반의 실내디자인에 관한 표현을 연구하였다.

• 한국응용곤충학회지
• /
• 제61권4호
• /
• pp.659-664
• /
• 2022

Putrescine은 일반적으로 미생물의 활동에 의해 발생되며, 신선함의 척도로서 사용된다. 그러나 동결건조된 로열젤리에 대한 putrescine의 분석법은 아직 확립되지 않은 실정이다. 본 연구에서는 C18 컬럼을 이용하여 동결건조 로열젤리 내 putrescine을 분석하기 위한 UPLC 분석법을 확립하고자 하였다. 새롭게 확립된 분석법은 7분 이내에 putrescine을 분석 가능하였으며, 이러한 분석법을 검증하기 위해 특이성, 직선성, 정밀성, 정확성, 정량한계, 정성한계 등을 평가하였다. 본 연구를 통해 동결건조 로열젤리의 신선한 정도를 평가하기 위한 분석법을 제공하였으며, 추후 안전성의 척도에 대한 자료로서 활용 가능할 것으로 기대되어진다.

• 대한인간공학회지
• /
• 제30권2호
• /
• pp.375-379
• /
• 2011

Objective: The aim of this paper is to introduce the Directive 2002/44/EC on the minimum health and safety requirements regarding the exposure of workers to the risks arising from vibration. Background: Human beings interact with machinery, and contact with vibration is commonplace. Unfortunately, continuous exposure to mechanical vibration can lead to physical injury. And standards are needed for identifying those at risk and for taking steps to mitigate the problem and reduce risk of injury. Method: The contents of the Directive were summarized and discussed, especially against its ISO counterparts. Results: The Directive deals with minimum safety and health prescriptions relative to workers' exposure to risks due to mechanical vibration. This directive specifies exposure limit values and action values. It also specifies employers' obligations with regard to determining and assessing risks, sets out the measures to be taken to reduce or avoid workers' exposure. Finally, it details how to make exposed workers aware of this issue. Conclusion: In spite of some limitations, it has recently been transcribed into all national laws of member States of European union. Application: The results of the paper might help to establish or update the domestic standards on vibration.

• 한국CDE학회논문집
• /
• 제21권1호
• /
• pp.69-77
• /
• 2016

The purpose of this study is to estimate the energy expenditure of working in a clean room for manufacturing embedded needles by ergonomic programs. Embedding needle is one of medical devices and it should be manufactured in a clean room. 3D static strength prediction program was used to analyze the slow movements during embedding needle manufacturing in a clean room. Also the energy expenditure prediction program was used to estimate energy expenditure rates for materials handling tasks to help assure worker safety and health in clean room. The energy expenditures of the tasks were calculated using prediction equations derived from empirical data. The energy expenditure rate of 3.09 kcal/min in a clean room didn't exceed the 3.5 kcal/min action limit guideline for an average 8-hour day set by the National Institute for Occupational Safety and Health (NIOSH). Energy consumption was calculated on the same working conditions as EEPP program, using an average body weight of female 20 years old to 59 years who would be the candidates of the real workers.

• 한국건축시공학회지
• /
• 제8권1호
• /
• pp.49-56
• /
• 2008

According to the recent trends which are the diversity of customer requests and the multi-function of buildings, A construction company's business has converted from the producer-oriented approach to the consumer-oriented approach. Therefore, each construction company is continuously trying to improve the quality level as a way of corresponding to customer needs in these changing situations. The quality is one of the main management targets which judge the success of a project along with the schedule, the cost and the safety. As construction companies execute the quality management which they aimed at, it should be completed within the optimum schedule and the limit of the budget. Accordingly, the importance of the construction site management to complete a project is continuously increasing. The construction site management is the systematic method to perform the project goals such as the quality improvement, the cost saving and the safety management, which organically operate one another, by procuring the manpower, the material and the machine in the right time. Specially, as the construction industry has based on the construction site, the establish of systematic construction site management, which can effectively correspond sudden changes of the construction business environment, is essential to maximize the construction productivity. On top of that, the necessity of the quality management method is increasing to accommodate customer needs more spontaneously in the construction site. These endeavors could guarantee their competitive power.

• 조명전기설비학회논문지
• /
• 제25권9호
• /
• pp.75-79
• /
• 2011

The MOV(Metal Oxide Varistor), a voltage limiting element, has been installed in the SPD(Surge Protective Device) or inside the internal circuit of an electronic appliance for protection of the electric power system and electronic device against electrical surge. Such an MOV is exposed, however, to the risk of the thermal runaway resulting from excessive voltage and deterioration. In this paper, a reciprocal action has been tested and analyzed using a phosphorus bronze switching module and the low-temperature solder. And a short current break characteristic test linked with the circuit breaker has been performed to limit the inrush current when the MOV breaks down. It has been proven that the phosphorus bronze switching module installed inside the internal circuit can improve the safety of the power line system and the electronic device.