• 전기학회논문지
• /
• 제59권11호
• /
• pp.2016-2020
• /
• 2010

Indium-zinc-oxide (IZO) films were deposited at room temperature via RF sputtering with varying the flow rate of additive nitrogen gas ($N_2$). Thin film transistors (TFTs) with an inverted staggered configuration were fabricated by employing the various IZO films, such as $N_2$-added and pure (i.e., w/o $N_2$-added), as active channel layers. For all the deposited IZO films, effects of additive $N_2$ gas on their deposition rates, electrical resistivities, optical transmittances and bandgaps, and chemical structures were extensively investigated. Transfer characteristics of the IZO-based TFTs were measured and characterized in terms of the flow rate of additive $N_2$ gas. The experimental results indicated that the transistor action occurred when the $N_2$-added (with $N_2$ flow rate of 0.4-1.0 sccm) IZO films were used as the active layer, in contrast to the case of using the pure IZO film.

• 한국염색가공학회지
• /
• 제31권2호
• /
• pp.65-76
• /
• 2019

A multi-point touch input sensor having different sizes or different capacitance touch points connected by only one pair of signal transmission lines was fabricated using a polyimide film coated with a thin copper plate. The capacitance increases with the decrease in the number of sheets of fabric spacers placed between the two sheets of the polyimide film. Therefore, the touch input sensor could be manufactured without fabric spacers, which was possible by the action of the polyimide film as a dielectric material in the capacitor. On the multi-point touch sensor, higher capacitance was obtained when pressing wider-area touch points with 10mm to 25mm diameter on average. However, the capacitance of a system comprising two sheets of touch sensors was considerably low, causing a serious overlap of the capacitance values according to the data collected from the reliability test. Although the capacitance values could be increased by stacking several sheets of touch sensors, the overlap of data was still observed. After reducing the size of all touch points to 10mm and stacking up to eight sheets of sensors, reliable and consistent capacitance data was obtained. Five different capacitance signals could be induced in the sensors by pushing touch points simultaneously.

• 한국멀티미디어학회논문지
• /
• 제19권12호
• /
• pp.2036-2043
• /
• 2016

The $360^{\circ}$ Virtual Reality (VR) live-action movies are filmed by attaching multiple cameras to a rig to shoot the images omni-directionally. Especially, for a live-action film that requires a variety of scenes, the director of photography and his staff usually have to operate the rigged cameras directly all around the scene and edit the footage during the post-production stage so that the entire process can incur much time and high cost. However, it will also be possible to acquire high-quality omni-directional images with fewer staff if the camera rig(s) can be controlled remotely to allow more flexible camera walking. Thus, a $360^{\circ}$ VR filming system with remote-controlled camera rig has been proposed in this study. The movie producers will be able to produce the movies that provide greater immersion with this system.

• 폴리머
• /
• 제33권5호
• /
• pp.509-513
• /
• 2009

키토산/피브로인 블렌드의 구조와 물성에 미치는 브롬화 리튬의 효과를 고찰하기 위하여, 브롬화 리튬을 함유한 용액으로 성형한 키토산/피브로인 블렌드 필름과 성형 시 브롬화 리튬을 제거한 블렌드 필름의 구조적 특성을 조사하였다. 키토산/피브로인 블렌드는 용해된 브롬/리튬이온과 더불어 복합체를 형성하였고, 0.6 mol/L의 LiBr 농도에서 X-선 회절에 의한 복합체의 결정성을 보였으며, 이온 농도가 증가할수록 결정성은 감소되었다. 복합체 용액으로부터 고화 시중화 및 삼투작용으로 브롬화 리튬을 제거한 블렌드 필름의 결정은 키토산의 수화형 결정상을 형성하였으며, 브롬화 리튬을 처리하지 않은 것에 비하여 결정성이 크게 증가하였다. 복합체에 의한 블렌드 필름은 자중의 수십 배의 물을 흡수하여 수화겔을 형성하였다.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3109-3114
• /
• 2010

Flexible composite films of $V_2O_5$ and conductive polypyrrole ($V_2O_5$/PPy) were grown by facile electrochemical polymerization, wherein an anodization potential was applied to the substrate electrode in an electrolyte solution containing pyrrole monomer and dispersed $V_2O_5$ particles. The coating of polypyrrole (PPy) on the surface of $V_2O_5$ particles was induced by the oxidative catalytic action of $V_2O_5$ during the electrochemical polymerization of pyrrole. PPy in the composite film connects the isolated $V_2O_5$ particles. This results in the formation of conductive networks in the composite film cathode, thereby enhancing the Li+ ion diffusion to the surface of the isolated $V_2O_5$ particles and thus increasing the accessibility of the $Li^+$ ions. The specific capacity tests of the Li rechargeable batteries revealed that the discharge capacity of this composite film cathode was higher, i.e., $497\;mAhg^{-1}$, than that of $V_2O_5$/PPy powder or pristine $V_2O_5$.

• 한국콘텐츠학회논문지
• /
• 제22권6호
• /
• pp.273-282
• /
• 2022

영화 <성공의 달콤한 향기>의 서사는 중층적 구조를 지니고 있다. 클리포드 오데츠의 시나리오 작업에는 중심 플롯과 서브플롯을 위한 수많은 대사가 생성-분해-삭제-수정을 반복하며 이야기의 밀도를 드높였다. 그 결과, 배우가 대사를 하거나 멈출 때마다 대사를 촉발할 행동이나 사건이 발생하며 배역의 연기에 깊이와 설득력을 부여했다. <성공의 달콤한 향기>의 음악은 중층적 요소를 지니고 있다. 비(非)디제시스의 영역은 엘머 번스타인의 빅 밴드 오케스트라에 의한 관현악곡과 프레드 캣츠의 캄보 밴드에 의한 재즈곡이, 디제시스의 영역은 치코 해밀턴의 오중주단에 의한 재즈곡이 주로 담당하였다. 영화 음악의 실질적 과제는 서사적 동인의 효과를 강화하거나 보충하는 것이었고, 추가적 과제는 소격 효과와 정체 미학을 구현하는 것이었다. 이 영화의 서브플롯과 더블 사운드가 펼쳐 보이는 상호텍스트성의 가능성과 의의는 단순히 느와르 장르의 한계에 닫혀 있지 않다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 영호남학술대회 논문집
• /
• pp.323-326
• /
• 2000

In this study, we used Brewster-Angle Microscope(BAM) to study on the molecular orientation of monolayer on the water surface. The behaviors of molecules on three different subphase have been observed. Reproducible $\pi$-A isotherm have been obtained only on information about phase transition by molecular area. BAM facilitates the observation of morphology by optical anisotropy and thickness in monolayer and multilayers as BAM is shown to be sensitive to anisotropy of film. Every transition was found by BAM technique, either as a dramatic change in degree of contrast or as a sudden alteration of molecular action and $\pi$-A isotherm.

• 마이크로전자및패키징학회지
• /
• 제7권1호
• /
• pp.29-34
• /
• 2000

본 연구에서는 전극판에 깊은 홈을 가지고 전기적으로 구동 되는 마이크로미러에 대한 감쇠 특성을 고찰하였다. 유한요소법을 사용하여 마이크로미러의 공기막과 구조물 변위가 커플된 시뮬레이션이 본 연구에 적용되었다. 감쇠력은 구동 되는 미러판과 전극판 사이 공기막의 스퀴즈효과에 의해 발생한다. 전극판의 홈은 감쇠력을 감소시키며, 미러판을 낮은 전압dptj 고속 구동할 수 있도록 하여주며 정밀제어가 가능하도록 하여 준다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
• /
• pp.583-585
• /
• 2000

This study reports the fluidic handling method using hydrophobic patterns inside PDMS microchannels. In order to obtain hydrophobic patterns, we pattern fluorcarbon(FC) film surfaces by lift-off process. FC films are deposited by spin coating method and plasma polymerization method. Hydrophobic surfaces are used as the barriers to control fluid flow. Injected liquid is spontaneously filled up inside PDMS-microchannels by the capillary action. Liquid flow stops when it meets hydrophobic regions which can be the barrier against fluid flow. Then, again, when liquid is pressurized externally, liquid can move toward another hydrophilic region by external air pressure. Contact angle analyses are performed on fluorocarbon films to estimate the wettability of film surfaces.

• Tribology and Lubricants
• /
• 제16권3호
• /
• pp.188-193
• /
• 2000

An experimental study was performed to discover the effect of environment on the tribological behavior of Si-incorporated diamond-like carbon(Si-DLC) film slid on a steel ball. The films were deposited on Si(100) wafers by a radio-frequency glow discharge of mixtures of benzene and dilute silane gases. Experiments using a ball-on-disk test-rig was performed in vacuum, dry air and ambient air conditions. It was observed that coefficient of friction decreased as the environment changed from vacuum, to dry air. Chemical analyses of debris suggested that low and stable friction is closely related to the formation of silicon-rich oxide debris and the rolling action.