• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1305-1310
• /
• 2012

The performance of a system can be affected by the variance of noise factors, which arise owing to uncertainties of the material properties and environmental factors acting on the system. For robust design optimization of the system performance, it is necessary to minimize the effect of the variance of the noise factors that are impossible to control. However, present robust design techniques consider the variation of design factors, and not the noise factors, as being important. Furthermore, it is necessary to assume a normal distribution; however, a normal distribution is often not suitable to estimate the variations. In this study, a robust design technique is proposed to consider the variation of noise factors that are estimated as non-normal distributions in a real experiment. As an example of an engineering problem, a deep-sea manganese nodule miner tracked vehicle is used to demonstrate the feasibility of the proposed method.

• Journal of Korean Society of Disaster and Security
• /
• v.5 no.2
• /
• pp.49-59
• /
• 2012

The safety management of the emergency exit, by directly related to the $civil^{\circ}$Øs dead in the fire situation, have limited by which the fire station take the on-side and control-centered way of business processing, it is expect to the effects in which the citizen have to concern and to take part. From 2010 years in the back-ground, it is operated nationally the report and reward system on an illegal behavior of the emergency exit, it is happened to the unfit operating situation in the mission and direction of the system up which the exit paparazzi act with intent to receive the reward payments. The study suggests solution through analyzing the illegal emergency exit operation result of sixteen counties and the Seoul metropolitan from year 2010 to 2011. Firstly, the report destination is adjusted to the multiple use establishments and the large-scale multiple use facilities over the limit level is limited under five times the report events of the same people in the minor endorsement. And the fine incomes should be invested to the disaster prevention acting related with the exit. Secondly, for upgrade of the report accuracy, a reporter is received the possible information for the confirmation of an illegal act, has become to lead the pre-monitoring act which the reporter is can to take the safety education and to guide the information about season and vulnerable business location. Finally, considering the support way about the encounter facility, the fire officer is not happen to occur the repetitive report in the same place, is related to the volunteer service system the report acts, consider as the volunteer service time, and must support them to act as the disaster prevention volunteer.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.736-741
• /
• 2017

This paper examines the design for improving the wiper system of rotorcraft. During rotorcraft operation, the wiping performance and excessive clearance can decrease. The wiper system consists of a wiper arm assembly, motor, convertor and flex drive. If there is a problem with the wiper system, the operation ability decreases because the operation is restricted in a rainy environment. There are two main causes of the problem of the wiper system: the lifting forces acting on the wiper arm in aircraft flight and the excessive gap of the components. To remedy these two problems, the wiper arm was improved. The improvements included increased contact pressure on the wiper arm (spring tension), improved gear clearance, and material and shape changes. Durability test, aircraft ground test and flight test were carried out to verify the improved shape, and it was confirmed that the wiping performance and clearance problems were solved. Currently, the rotorcraft is operated without problem by applying the improved shape, and this design improvement process will be a useful reference for future rotorcraft development.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.803-811
• /
• 2024

Nuclear accidents such as Fukushima Daiichi have highlighted the potential of passive safety systems to replace or complement active safety systems as part of the overall prevention and/or mitigation strategies. In addition, passive systems are key features of Small Modular Reactors (SMRs), for which they are becoming almost unavoidable and are part of the basic design of many reactors available in today's nuclear market. Nevertheless, their potential to significantly increase the safety of nuclear power plants still needs to be strengthened, in particular the ability of computer codes to determine their performance and reliability in industrial applications and support the safety demonstration. The PASTELS project (September 2020-February 2024), funded by the European Commission "Euratom H2020" programme, is devoted to the study of passive systems relying on natural circulation. The project focuses on two types, namely the SAfety COndenser (SACO) for the evacuation of the core residual power and the Containment Wall Condenser (CWC) for the reduction of heat and pressure in the containment vessel in case of accident. A specific design for each of these systems is being investigated in the project. Firstly, a straight vertical pool type of SACO has been implemented on the Framatome's PKL loop at Erlangen. It represents a tube bundle type heat exchanger that transfers heat from the secondary circuit to the water pool in which it is immersed by condensing the vapour generated in the steam generator. Secondly, the project relies on the CWC installed on the PASI test loop at LUT University in Finland. This facility reproduces the thermal-hydraulic behaviour of a Passive Containment Cooling System (PCCS) mainly composed of a CWC, a heat exchanger in the containment vessel connected to a water tank at atmospheric pressure outside the vessel which represents the ultimate heat sink. Several activities are carried out within the framework of the project. Different tests are conducted on these integral test facilities to produce new and relevant experimental data allowing to better characterize the physical behaviours and the performances of these systems for various thermo-hydraulic conditions. These test programmes are simulated by different codes acting at different scales, mainly system and CFD codes. New "system/CFD" coupling approaches are also considered to evaluate their potential to benefit both from the accuracy of CFD in regions where local 3D effects are dominant and system codes whose computational speed, robustness and general level of physical validation are particularly appreciated in industrial studies. In parallel, the project includes the study of single and two-phase natural circulation loops through a bibliographical study and the simulations of the PERSEO and HERO-2 experimental facilities. After a synthetic presentation of the project and its objectives, this article provides the reader with findings related to the physical analysis of the test results obtained on the PKL and PASI installations as well an overall evaluation of the capability of the different numerical tools to simulate passive systems.

• The Journal of Engineering Geology
• /
• v.19 no.1
• /
• pp.63-70
• /
• 2009

The optical fiber cable acting as a sensor was embedded in the underground research tunnel and portal area in order to monitor their stability and the spatial temperature variation. This system includes two types of sensing function to monitor the distributed strain and temperature along the line, where sensor cable is installed, not a point sensing. According to the results of one year monitoring around the KURT, there is no significant displacement or movement at the tunnel wall and portal slope. However, it would be able to aware of some phenomena as an advance notice at the tunnel wall which indicates the fracturing in rockmass and shotcrete fragmentation before rock falls accidently as well as movement of earth slope. The measurement resolution for rock mass displacement is 1 mm per 1 m and it covers 30 km length with every 1m interval in minimum. In temperature, the cable measures the range of $-160{\sim}600^{\circ}C$ with $0.01^{\circ}C$ resolution according to the cable types. This means that it would be applicable to monitoring system for the safe operation of various kinds of facilities having static and/or dynamic characteristics, such as chemical plant, pipeline, rail, huge building, long and slim structures, bridge, subway and marine vessel. etc.

• Journal of Embryo Transfer
• /
• v.28 no.2
• /
• pp.157-162
• /
• 2013

Methoxychlor (MXC) was developed to be a replacement for the banned pesticide DDT. HPTE [2,2-bis (p-hydroxyphenyl)-1,1,1-trichloroethane], which is an in vivo metabolite of MXC, has strong oestrogenic and anti-androgenic effects. MXC and HPTE are thought to produce potentially adverse effects by acting through oestrogen and androgen receptors. Of the two, HPTE binds to sex-steroid receptors with greater affinity, and it inhibits testosterone biosynthesis in Leydig cells by inhibiting cholesterol side-chain cleavage enzyme activity and cholesterol utilisation. In a previous study, MXC was shown to induce Leydig cell apoptosis by decreasing testosterone concentrations. I focused on the effects of MXC on male mice that resulted from interactions with sex-steroid hormone receptors. Sex-steroid hormones affect other organs including the kidney and liver. Accordingly, I hypothesised that MXC can act through sex-steroid receptors to produce adverse effects on the testis, kidney and liver, and I designed our experiments to confirm the different effects of MXC exposure on the male reproductive system, kidney and liver. In these experiments, I used pre-pubescent ICR mice; the puberty period in ICR mice is from postnatal day (PND) 45 to PND60. I treated the experimental group with 0, 100, 200, 400 mg MXC/kg b.w. delivered by an intra-peritoneal injection with sesame oil used as vehicle for 4 weeks. At the end of the experiment, the mice were sacrificed under anaesthesia. The testes and accessory reproductive organs were collected, weighed and prepared for histological investigation. I performed a chemiluminescence immune assay to observe the serum levels of testosterone, LH and FSH. Blood biochemical determination was also performed to check for other effects. There were no significant differences in our histological observations or relative organ weights. Serum testosterone levels were decreased in a dose-dependent manner; a greater dose resulted in the production of less testosterone. Compared to the control group, testosterone concentrations differed in the 200 and 400 mg/kg dosage groups. In conclusion, I observed markedly negative effects of MXC exposure on testosterone concentrations in pre-pubescent male mice. From our biochemical determinations, I observed some changes that indicate renal and hepatic failure. Together, these data suggest that MXC produces adverse effects on the reproductive system, kidney and liver.

• Journal of The Korean Association of Information Education
• /
• v.12 no.1
• /
• pp.33-40
• /
• 2008

In social studies the ability of a student to investigate after deciding the subject and individual planning to search for society and to put investigation reports in order has been taken as highly important. The social studies performance evaluation methods used most frequently in education is also one of the investigation report method. However, when most students get the task "Write the report", they might write the report without any distinct object or organized structure. The evaluation result given by the teacher at the end of term is thus one sided. The recent performance evaluation is to keep the existing evaluation and let only the result have importance, not the essential meaning. So this paper is to build and materialize a web-based performance evaluation system, to be able to evaluate a course of classes. This paper's purposes was to write the reports in setting the standard form that the students research and collect the various data as based in the system and to improve the quality of evaluation and to inspire the study motivation as acting the mutuality action among the students and between them and teachers as giving a feedback at once after evaluating among colleagues by suggested evaluation views.

• Journal of Life Science
• /
• v.24 no.12
• /
• pp.1330-1338
• /
• 2014

In Mycobacterium tuberculosis H37Rv 16 adenylyl cyclase (AC) genes have been identified, while 10 AC genes have been found in non-pathogenic Mycobacterium smegmatis. Expression of 6 AC genes (MSMEG_0218, MSMEG_3243, MSMEG_3780, MSMEG_4279, MSMEG_4477, and MSMEG_6154) among 10 AC genes in M. smegmatis was increased when M. smegmatis was subjected to hypoxic growth conditions. On the other hand, only MSMEG_3780 and MSMEG_4279 were slightly induced in the presence of NO. The cAMP levels in cells and culture media were 450- and 9.8-fold increased, respectively, when M. smegmatis was grown under hypoxic conditions relative to those grown aerobically. Intracellular levels of cAMP were increased 5.8-fold on the exposure to NO. The DevSR two-component system is known to be involved in the induction of many genes whose expression is induced under hypoxic conditions and in the presence of NO. Expression of 6 hypoxically induced AC genes was observed to be induced in a devR deletion mutant grown under hypoxic conditions, indicating that the induction of the 6 AC genes under hypoxic conditions is independent of the DevSR two-component system. In order to identify a trans-acting regulatory element that is pertinent in the hypoxic induction of MSMEG_3780, ligand-fishing analysis was performed using the upstream DNA of MSMEG_3780 and MSMEG_5136 protein was identified.

• The Korean Journal of Franchise Management
• /
• v.12 no.4
• /
• pp.1-11
• /
• 2021

Purpose: The franchise system started by Singer Sewing Machine in the US is acting as a national economic growth engine in terms of job creation and economic growth. In China, the franchise system was introduced in the mid-1980s. And since joining the WTO, it has grown by 5-6% every year. However, compared to the growth rate of franchises, studies on shared growth between the chain headquarters and franchisees were insufficient. Accordingly, recent studies related to shared growth between the chain headquarters and franchisees have been active in China. The purpose of this study is to examine the knowledge transfer system between the knowledge creation, knowledge sharing, and the use of knowledge by franchise chain headquarters in China. In addition, the relationship between franchise satisfaction and performance is identified. Research design, data, and methodology: The data were collected from franchise stores in Sichuan, China, and were conducted with the help of ○○ Incubation, a Sichuan Province-certified incubator. From November 2020 to January 2021, 350 copies of the questionnaire were distributed in China, and 264 copies were returned. Of these, 44 copies with insincere answers and response errors were excluded, and 222 copies were used for analysis. The data were analyzed with SPSS 22.0 and AMOS 22.0 statistical packages. Result: The results of this study are as follows. First, knowledge creation has been shown to have a statistically significant impact on knowledge sharing and knowledge utilization. In particular, the effectiveness of knowledge creation was higher in knowledge sharing than in knowledge utilization. And we can see that knowledge sharing also has a statistically significant e ffect on knowledge utilization. Second, knowledge sharing was not significant for transaction satisfaction and business performance, and knowledge utilization was significant for transaction satisfaction and business performance. These results can be said to mean less interdependence of the Chinese franchise system. Finally, transaction satisfaction was statistically significant to business performance. The purpose of this study was to examine the importance of knowledge management to secure long-term competitive advantage for Chinese franchises. This study shows that knowledge sharing is important for long-term franchise growth. And we can see that there is a lack of knowledge sharing methods in the case of franchises in China. I n addition, it was found that the growth of Chinese franchises requires systematization of communication, information sharing measures and timing, help from chain headquarters, and mutual responsibility awareness.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.887-895
• /
• 2018

This paper presents a braking model that can be used to design the safety distance of a train control system and a train braking system to increase the volume of traffic. For the braking model, a train set (electric multiple unit composed 6 cars) was tested. The factors that can affect the braking characteristics include the friction coefficient, braking pressure, and regenerative braking. The braking pressure was classified into service and emergency braking and reflected the characteristics of the vehicle. The external force acting on the running railway car was tested in accordance with KS R 9217, and the running resistance of the train is presented in the form of a polynomial. The dynamic behavior of the train running on a straight flat line was simulated using UM 8.3. The results were validated with experimental data, and the results were reasonable. With the validated model, a stopping distance was determined according to the initial braking speed and compared with the deceleration braking model. In addition, a safety distance for the train control system could be changed according to the frictional coefficient limits. These results are expected to be useful for analyzing the dynamic behavior of trains, and for analyzing various railway environments and improving the braking performance.