• Korean Chemical Engineering Research
• /
• 제50권2호
• /
• pp.191-197
• /
• 2012

Isophorone diisocyanate(IPDI), polycarbonate diol(PCD), dimethylol propionic acid(DMPA)를 출발물질로 하여 제조된 폴리우레탄 prepolymer의 미반응 NCO기를 아크릴 단량체인 pentaerythritol triacrylate(PETA)로 capping시켜 acrylic terminated polyurethane prepolymer를 합성하였다. 그 후 이 prepolymer의 잔여 NCO기를 실란커플링제인 aminopropyl triethoxysilane(APS) 또는 glycidoxypropyl trimethoxysilane(GPTMS)와 반응시켜 silylated acrylic terminated waterborne polyurethane을 제조하였다. 동적 빛 산란법에 의해 측정된 순수한 수분산 폴리우레탄의 평균 직경은 PETA와 APS가 첨가됨에 따라 14.3 nm에서 208.6 nm로 크게 증가하였다. 또한 silylated acrylic terminated waterborne polyurethane 코팅 도막의 연필경도 및 내마모성은 순수한 수분산 폴리우레탄보다 우수하였다.

• Korean Chemical Engineering Research
• /
• 제49권4호
• /
• pp.411-416
• /
• 2011

Isophorone diisocyanate(IPDI), polycarbonate diol(PCD), dimethylol propionic acid(DMPA)를 출발물질로 하여 NCO terminated prepolymer가 합성되었다. 이 prepolymer의 NCO기를 아크릴 단량체로 capping하기 위해 0~0.024 mole로 첨가량이 조절된 pentaerythritol triacrylate (PETA)가 첨가되었다. 제조된 acrylic terminated polyurethane 용액의 평균입경은 PETA의 첨가량이 증가함에 따라 증가하였다. 또한 제조된 코팅 필름의 연필경도 및 내마모성은 순수한 수분산 폴리우레탄보다 우수하였다.

• Korean Chemical Engineering Research
• /
• 제49권5호
• /
• pp.548-553
• /
• 2011

Isophorone diisocyanate(IPDI), polycarbonate diol(PCD), dimethylol propionic acid(DMPA)를 출발물질로 하여 NCO terminated prepolymer가 합성되었다. 이 prepolymer의 NCO기를 아크릴 단량체로 capping하기 위해 다양한 아크릴 단량체인 2-hydroxyethyl methacrylate(HEMA), 2-hydroxyethyl acrylate(HEA), pentaerythritol triacrylate(PETA)가 첨가되었다. 제조된 용액의 평균 입경은 아크릴 단량체가 첨가되면서 증가하였다. 또한 제조된 코팅 막의 연필경도 및 내마모성은 순수한 수분산 폴리우레탄보다 우수하였으며, 아크릴 단량체 중에서 PETA가 가장 우수한 물성을 보였다.

• 청정기술
• /
• 제23권2호
• /
• pp.148-157
• /
• 2017

To prepare UV-curable polyurethane-acrylate oligomer, NCO-terminated urethane prepolymers with trimethylolpropane, [TMP; 0 (0), 0.1 (0.021) and 0.2 (0.043) mole (mole fraction)] as crosslinkable tri-functional chain extender were end-capped with pentaerythritol triacrylate [PETA; 2.0 (0.400), 1.7 (0.354) and 1.4 (0.304) mole (mole fraction)] with one hydroxyl group/three vinyl functionalities. The stable as-formulated UV-curable polyurethane-acrylates [stable mixtures of PETA-capped oligomer/reactive acrylic monomer diluents without/with heptadecafluorodecyl methacrylate (PFA; 0, 6 and 9 wt%)] were formed up to 0.2 (0.043) mole (mole fraction) of TMP content in the prepolymer, while homogeneous-mixing failed at 0.3 (0.068) mole (mole fraction), in which the crosslink density in NCO-terminated urethane prepolymer was too high to enable the formation of stable mixture. This study examined the effect of TMP/PETA molar ratio and heptadecafluorodecyl methacrylate (PFA) content (wt%) on the properties of UV-cured polyurethane-acrylates as marine antifouling coating materials. The properties of UV-cured polyurethane-acrylate were found to be significantly dependent on the crosslinkable TMP/PETA ratio and PFA content. With the increasing of the TMP and PFA contents, the contact angles increased, and consequently the surface tension decreased. The adhesion of algae/barnacles to PFA contained film samples were found to be sufficiently weak to allow their easy removal. These results suggest that the UV-cured samples containing PFA have strong potential as coating materials for antifouling applications.