• Polymer(Korea)
• /
• 제36권3호
• /
• pp.351-356
• /
• 2012

Acryl binder is a representative organic additive for the manufacture of the display electronic equipment. Acryl binder is usually synthesized by radical copolymerization. Glycidyl methacrylate (GMA), methyl methacrylate (MMA), and methacrylic acid (MAA) were used in this copolymerization of acryl binder. In this study the silane type mercaptane compound was used as a chain transfer agent (CTA) to enhance the adhesion property of the acrylic binder. The CTA used in this experiment was (3-mercaptopropyl) trimethoxysilane (MPTMS). Molecular weight of the copolymer, thickness of the coating, transmittance, and adhesion property were measured. The molecular weight was controlled and the adhesion property was improved by using this silane type chain transfer agent.

• Journal of the Korean Chemical Society
• /
• 제61권2호
• /
• pp.57-64
• /
• 2017

Monoclinic $VO_2(M)$ nanoparticles codoped with 1.5 at. % W and 2.9 at. % Mg were synthesized by the hydrothermal treatment and post-thermal transformation method of $V_2O_5-H_2C_2O_4-H_2O$ with $Na_2WO_4$ and $Mg(NO_3)_2$. The composite thin film of the W/Mg-codoped $VO_2(M)$ with a commercial acrylic block copolymer was also prepared on PET substrate by wet-coating method. The reversible phase transition characteristics of the codoped $VO_2(M)$ nanoparticles and the composite film were investigated from DSC, resistivity and Vis-NIR transmittance measurements compared with the undoped and Wdoped $VO_2(M)$ samples. Mg-codoping into W-doped $VO_2(M)$ nanoparticles synergistically enhanced the transition characteristics by increasing the sharpness of transition while the transition temperature ($T_c$) lowered by W-doping was maintained. The codoped composite film showed the prominently enhanced NIR switching efficiency compared to only W-doped $VO_2(M)$ film with a lowered $T_c$.

• Journal of the Korean Applied Science and Technology
• /
• 제12권2호
• /
• pp.51-58
• /
• 1995

To prepare a durable softening water repellent, quaternized octadecyl methacrylate-2-diethyl-aminoethyl methacrylate as a mother resin and quaternized 1, 3-dioctadecyl-2, 7-dioxy-6, 8-di(2-hydroxyethyl)-1, 3, 6, 8-tetraazacyclodecane which increase the softening effect and the hydrostatic pressure blended with waxes and their emulsifier in various proportions to give water repellent PADWC. As the results of the measurement of water repellency, washable, tear strength and crease recovery to polyestercotton(P/C) blended fabrics treated with PADWC only or addition of textile finishing resin, the physical properties were increased. There was no significant lowering effect in water repellency when PADWC was treated the antistatic agent by the one-bath method, and the effect of water repellency by the adding the catalyst was studied. PADWC was confirmed as durable water repellent with the results of making little difference of water repellency as ${\pm}5$ point after and before washing.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.245-250
• /
• 2006

This study was focused on the use of cationic PAM (Polyacrylamide) as a surface sizing additive to improve the surface sizing properties of paper. Effects of the ionic property, viscosity and charge density of PAM on bending stiffness of surface sized papers were investigated. Use of cationic PAM as a surface sizing additive improved bending stiffness while addition of anionic PAM did not show any effect. Increase of starch holdout with the addition of cationic PAM was attributed as a prime reason of stiffness increase. Viscosity of PAM was one of the most important factors affecting surface sizing due to its influence on the interaction between cationic PAM and oxidized starch solution. Greater improvement of bending stiffness of paper was obtained when high charged PAM was used as an additive. The order of addition was found to have significant influence on the effect of additives since it influences the formation of network structure among starch, cationic PAM, and SA (styrene acrylic acid copolymer). Investigation on the penetration of starch solution was carried out with CLSM (Confocal Laser Scanning Microscopy), and it was shown that the addition of cationic PAM to oxidized starch solution made starch molecules stay on the paper surface rather than penetrating into the paper structure because of the electrostatic interaction between negatively charged fibers and positively charged cationic PAM.

• Applied Chemistry for Engineering
• /
• 제4권1호
• /
• pp.188-195
• /
• 1993

Polyelectrolyte complexes and graft copolymers as biomaterials were synthesized from the water soluble cellulose derivatives. Polyelectrolyte complexes have been prepared from carboxymethyl cellulose (CMC) and gelatin. Graft copolymers(Mc-g-AA) were synthesized by grafting acrylic acid (AA) onto methyl cellulose(MC). (Mc-g-AA) and gelatin polyelectrolyte complexes were also prepared. The optimum conditions of each sample were investigated after chemical crosslinking or heat treatment. The preliminary results show that these materials might be interesting for biomedical applications.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3163-3172
• /
• 2010

In this work, a novel method to synthesis of an acrylic superabsorbent hydrogel was reported. In the two stage hydrogel synthesis, first copolymerization reaction of acrylonitrile (AN) and acrylamide (AM) monomers using ammonium persulfate (APS) as a free radical initiator was performed. In the second stage, the resulted copolymer was hydrolyzed to produce carboxamide and carboxylate groups followed by in situ crosslinking of the polyacrylonitrile chains. The results from FTIR spectroscopy and the dark red-yellow color change show that the copolymerization, alkaline hydrolysis and crosslinking reactions have been do take place. Scanning electron microscopy (SEM) verifies that the synthesized hydrogels have a porous structure. The results of Brunauer-Emmett-Teller (BET) analysis showed that the average pore diameter of the synthesized hydrogel was 13.9 nm. The synthetic parameters affecting on swelling capacity of the hydrogel, such as AM/AN weight ratio and hydrolysis time and temperature, were systematically optimized to achieve maximum swelling capacity (330 g/g). The swollen gel strength of the synthesized hydrogels was evaluated via viscoelastic measurements. The results indicated that superabsorbent polymers with high water absorbency were accompanied by low gel strength. The swelling of superabsorbent hydrogels was also measured in various solutions with pH values ranging from 1 to 13. Also, the pH reversibility and on-off switching behavior makes the hydrogel as a good candidate for controlled delivery of bioactive agents. Finally, the swelling of synthesized hydrogels with various particle sizes obey second order kinetics.

• Macromolecular Research
• /
• 제11권1호
• /
• pp.47-52
• /
• 2003

The objective of this study was to develop a polymeric drug delivery system for camptothecin (CPT), capable of improving its therapeutic index and reducing its side effects. A monomeric conjugate, 3,6-endo-methylene-1,2,3,6-tetrahydrophthalimidoethanoylcamptothecin in (ETECPT) between CPT and 3,6-endo-methylene-1,2,3,6-tetrahydrophthalimidoethanoic acid was synthesized. Its homo-and copolymer with acrylic acid (AA) were prepared by photopolymerization using 2,2-dimethoxy-2-phenylacetophenone (DMP) as a photoinitiator. The monomer and its polymers were characterized by IR, $^1$H- and $^{13}$ C-NMR spectra. The ETECPT content in poly(ETECPT-co-AA) obtained by elemental analysis was 82 wt%. The number-average molecular weights of the polymers determined by gel permeation chromatography were as follows: M$_{n}$ = 11,400 for poly(ETECPT), M$_{n}$ = 17,900 for poly(ETECPT-co-AA). The $IC_{50}$/ values of ETECPT and its polymers against cancer cells were much larger than that of CPT. Our results from the in vivo antitumor activity indicated that all polymers show high antitumor activity than CPT at a dose of 100 mg/kg./kg.

• Journal of the Korean Applied Science and Technology
• /
• 제13권1호
• /
• pp.41-46
• /
• 1996

Durable softening water repellents such as PODCWs were prepared by blending cationized compound of poly(octadecyl methacrylate-co-2-diethylaminoethyl methacrylate), of which synthetic methods were reported in the previous paper, activated polythylene, waxes, and emulsifiers. Water repellency of prepared PODCWs was measured by performing water repellent finish to various fabrics, PODCWs showed a good water repellency for P/C blended fabrics and their repelling tendency was in the order of P/C blended fabrics>cotton fabrics>nylon taffeta. The initial water repellencies of PODCW-1 and PODCW-2 were 100 and $100^{-}$ points, respectively, for P/C blended fabrics. And also, PODCW-1 and PODCW-2 were confirmed as durable water repellents with the results of making little difference of water repellency as ${\pm}5$ point after and before washing.

• Journal of Integrative Natural Science
• /
• 제9권1호
• /
• pp.16-22
• /
• 2016

The optical and physical and characteristics of hydrogel ophthalmic lens polymerized with addition of 2,6-difluoropyridine, SiPc(silicon 2,9,16,23-tetra-tert-butyl-29H31H-phthalocyanine dihydroxide) and nanodiamond in the basic hydrogel material were evaluated. In particular, the utility of 2,6-difluoropyridine, SiPc and nanodiamond as a hydrogel ophthalmic lens material was investigated. 2,6-difluoropyridine, SiPc and nanodiamond were used as additives. And also, 2-hydroxyethyl methacrylate, acrylic acid, methyl methacrylate and a cross-linker EGDMA were copolymerized in the presence of AIBN as an initiator. The refractive index of 1.4348~1.4361, water content of 33.30~34.02%, UV-B transmittance of 4.77~67.50%, UV-A transmittance of 1.45~89.19% and visible transmittance of 32.12~92.21% were obtained. The results of hydrogel lens containing 2,6-difluoropyridine (add 5%) showed antibiosis for staphylococcus aureus. The produced copolymer is suitable for hydrogel soft ophthalmic lenses with antibiotic and anti-UV effect.

• Journal of the Korea Concrete Institute
• /
• 제18권4호
• /
• pp.569-576
• /
• 2006

PC-type copolymers were synthesized using MPEG(polyethylene glycol methyl ether methacrylate, Mn=2080) to different mole ratios of mono-carboxylic acid(AA : acylic acid). The mole ratios of AA were 2, 3, 4 and PC-type terpolymers were synthesized using mono-, dicarboxylic acid(ITA : itaconic acid MAL : maleic acid) with the same graft chain. To investigate effects of PC-type co-, ter-polymers on the hydration of cement experiments involving FT-IR, XRD, DSC, SEM have been analysed with cement paste specimens to 1, 3, 28 day. The hydration reaction rate of cement paste was slightly delayed at 1 day, due to increase in molar ratio of [AA]/[MPEG], it was recovered in the days after and the copolymer was more active than the terpolymer, because of low carboxylic acid content PC-type copolymers applied 2AA-type were fastest copolymer on hydration reaction of cement paste to 3 day and the more AA mole ratios increased, the more hydration was retarded.