• Applied Chemistry for Engineering
• /
• v.3 no.4
• /
• pp.717-721
• /
• 1992

Mechanical mixtures of vanadium molybdate and copper molybdate catalysts prepared by coprecipitation method, and those of $MoO_3$ and $V_2O_5$ were used to study the synergistic effects between each metal oxide for the selective oxidation of acrolein. The catalytic activity results revealed that the conversion of acrolein and yield of acrylic acid were increased with the mixture catalysts and it could be explained by a remote control mechanism. Thermal gravimetric analysis confirmed the evolution of lattice oxygen in the mixture catalysts.

• Journal of Conservation Science
• /
• v.29 no.1
• /
• pp.25-33
• /
• 2013

This study aims to investigate the film performance by physical properties of glue and gelatin in traditional paint(Dancheong). To do this, homemade, commercial glue and gelatin was selected and evaluated water reaction and weatherproof. The result, the highest gel strength, gelatin was better than acrylic acid ester resin, when compared with hygroscopic property and adhesive property. And that was better than in any others, when compared with water-proofing.

• Applied Microscopy
• /
• v.46 no.2
• /
• pp.105-109
• /
• 2016

Palladium has been used as a catalyst not only in Suzuki and Heck cross coupling reaction in organic chemistry, but also in automobile industry for the reduction of vehicle exhausts. The catalytic activity of Pd nanoparticles depends strongly on their size and exposed crystalline facets. In this study, the single crystalline palladium nanocubes/nanorods were prepared in the presence of polyvinyl pyrrolidone (PVP) and potassium bromide (KBr) using the polyol method. Selected area diffraction pattern and high-resolution transmission electron microscopy (TEM) were performed by TEM. The result shows that the ratio of KBr/PVP is the key factor to determine whether the product is cubes or rods. The as-prepared Pd nanocubes were highly uniform in both size and shape. The ordered packing structures including monolayer and multilayer can be fabricated via the rate-controlled evaporation of solution solvent. The catalytic activity of these Pd nanocubes towards heck reaction of iodobenzene with acrylate or acrylic acid was found to be higher than that of Pd nanorods. We suspect it is caused by the difference of energy state while Pd nanocubes is {100} plane and nanorods is {111} plane.

• Applied Chemistry for Engineering
• /
• v.4 no.1
• /
• pp.125-131
• /
• 1993

The state of water in various modified cellulose membranes such as [carboxymethyl cellulose(CMC)-gelatin] polyelectrolyte complex, methylcellulose(MC) grafted with acrylic acid(AA), [(MC-g-AA)-gelatin] polyelectrolyte complex, were determined by differential scanning calorimetric technique. The amounts of freezing(free) and nonfreezing(bound) water were estimated to determine the permeability coefficient of solutes through membranes. The state of water in membranes were influenced by the states of the composition, morphology, and their water content. The difference in diffusive permeability through the water-swollen membranes can be explained by the difference in the free and bound water content.

• Applied Chemistry for Engineering
• /
• v.4 no.1
• /
• pp.188-195
• /
• 1993

Polyelectrolyte complexes and graft copolymers as biomaterials were synthesized from the water soluble cellulose derivatives. Polyelectrolyte complexes have been prepared from carboxymethyl cellulose (CMC) and gelatin. Graft copolymers(Mc-g-AA) were synthesized by grafting acrylic acid (AA) onto methyl cellulose(MC). (Mc-g-AA) and gelatin polyelectrolyte complexes were also prepared. The optimum conditions of each sample were investigated after chemical crosslinking or heat treatment. The preliminary results show that these materials might be interesting for biomedical applications.

• Korean Journal of Materials Research
• /
• v.27 no.4
• /
• pp.199-205
• /
• 2017

In this study, (3,4-epoxycyclohexane)methyl 3,4-epoxycyclohexylcarboxylate acrylate was synthesized by reacting (3,4-epoxycyclohexane)methyl 3,4-epoxycyclohexylcarboxylate with acrylic acid to minimize hardening shrinkage and to improve heat resistance, which are known as disadvantages of photopolymers for 3D printing application. Urethane acrylate was synthesized by reacting 1,3,5-triazine-2,4,6-triamino alcohol, 2-hexylethyl acrylate, and isophorone diisocyanate in order to improve the mechanical properties without deteriorating the heat resistance. The physical properties before and after the synthesis of the acrylate and the mechanical properties when the urethane acrylate was applied were investigated. The reaction progress of the composite was examined by FTIR and $^{13}C$ NMR. The heat deflection temperature, flexural strength, and surface hardness of the molding were measured. The curing behavior by Photo-DSC ultraviolet irradiation was also examined.

• Journal of Pharmaceutical Investigation
• /
• v.34 no.3
• /
• pp.193-199
• /
• 2004

The decreasing effect of wrinkle on the pressure sensitive adhesive hydrogel patches containing ulmi cortex extract and sorbitol as the drug for anti-wrinkle were investigated. In this study, hydrogels were prepared by the crosslinking reaction of acrylic polymers and aluminum ions produced by L(+)-tartaric acid hydrolysis of the dihydroxy aluminum aminoacetates. The inhibition concentration of ulmi cortex extract on the collagenase exhibited at 0.01%. Furthermore, the moisturizing effect of hydrogel patches formulated with sorbitol was higher than that without it. In vivo animal test in hairless mouse showed that the ulmi cortex-loaded hydrogel patches had about 31.2% of anti-wrinkle effect compared to blank (before attaching the patches). Human test showed that only 33% of subjects showed the decreasing of wrinkle during 8 weeks. In conclusion, the model pressure sensitive adhesive hydrogel patches in this study would be pharmaceutically applicable for the wrinkle treatment on the facial skin.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.12
• /
• pp.1819-1826
• /
• 2003

In connection with the studies for developing new enzymes that could be useful in organic synthesis, practical preparation of racemic and enantiopure forms of ${\gamma}$-hydroxy-${\alpha}$-keto acids has been successfully achieved. For racemic form of ${\gamma}$-hydroxy-${\alpha}$-keto acids, indium-mediated allylation of aldehydes with 2-(bromomethyl)acrylic acid has been employed as a key step. Oxidative cleavage of the thus formed 2-methylenebutyrolactones provided the desired ${\alpha}$-ketobutyrolactones. Enzymatic resolution of the ${\gamma}$-hydroxy-${\alpha}$-methylene esters provided the desired${\gamma}$-hydroxy-${\alpha}$-methylene acids which were successfully converted to ${\gamma}$-hydroxy-${\alpha}$-ketobutyrolactones in optically pure forms.

• The korean journal of orthodontics
• /
• v.15 no.2
• /
• pp.271-277
• /
• 1985

With modification of the acid etch technique and improvements of the physical and mechanical properties of the acrylic resin, the removal of directly bonded attachments and the finishing of the underlying enamel have become an acute clinical problem. This study was to evaluation the efficacy of recently introduced instrumentation and techniques to remove bonded brackets and residual resin, and restore the affected enamel surface to an acceptable clinical condition. Fortyeight premolar which were scheduled for extraction for orthodontic purposes were bonded with brackets using super-C ortho. Four additional premolars with untreated surfaces were used as controls. After one weak the brackets were removed and the residual resin removed by hand scaler, green stone, green rubber wheel, sandpaper disc, tungsten carbide bur, Sof-lex disc. Half the experimental teeth were given a final pumicing and then all were extracted and stored in 50 percent ethanol. The scanning electron microscopy was used to evaluated the enamel surface. Following results were obtained; 1. A satisfactory result was obtained by means of the Sof-lex disc. 2. The order of the scratch formation was the procedure using hand scaler, green atone, tungsten carbide bur, sandpaper disc, green rubber wheel, and Sof-lex disc. 3. The procedures using green stone and tungsten carbide bur showed many groove formations and the other procedures showed none. 4. final pumicing serves effectively to remove residual adhesive and restore the enamel surface.

• Polymer(Korea)
• /
• v.32 no.3
• /
• pp.219-229
• /
• 2008

A pH sensitive ternary copolymer gel was synthesized in the presence of ethylene glycol dimethacrylate (EGDMA) as a crosslinking agent through radical polymerization of vinyl acetate (VA), acrylic acid (AA) and methyl acrylate(MA) with a weight ratio of 1 : 1.3 : 1. A number of experiments were carried out to determine the swelling behavior of the gel under a variety of pH conditions of the swelling medium. As the pH of the swelling medium was changed from 1.0 to 8.0 at $37^{\circ}C$, the gel showed a shift in the pH-dependent swelling behavior from Fickian (n=0.3447) to non-Fickian (n=0.9125). The resulting swelling parameters were analyzed using graphical and statistical methods. The results showed that the swelling of the gel was controlled by the pH of the medium, i.e. $n=n_o{\exp}(S_{C}pH)$, where n is the diffusion exponent, $n_o(=28.9645{\times}10^{-2})$ is the pre-exponential factor and $S_C$(=0.1417) is pH sensitivity coefficient. The swelling behavior of the gel was also examined in aliphatic alcohols. The results showed that the rate of swelling increased with increasing number of carbon atoms in the alcoholic molecular chain.