• 제목/요약/키워드: Acrylic Acid

검색결과 554건 처리시간 0.034초

원자 이동 라디칼 중합을 이용한 Polystyrene-b-Poly(acrylic acid) 블록 이오노머의 합성 및 분석 (Synthesis and Characterization of Polystyrene-b-Poly(acrylic acid) Block Ionomer via Atom Transfer Radical Polymerization)

  • 박계리;안성국;조창기
    • 폴리머
    • /
    • 제27권1호
    • /
    • pp.17-25
    • /
    • 2003
  • 원자 이동 라디칼 중합 (ATRP)을 이용하여 CuBr/N,N,N',N",N"-pentamethyldiethylene triamine 촉매 시스템하에서 용액중합으로 polystyrene 거대 개시제와 polystyrene-b-t-poly(butyl acrylate) (PS-b-P(tBA)) 블록 공중합체를 합성한 후, 가수분해를 통해 polystrene-b-poly(acrylic acid) 양친매성 블록 공중합체를 얻었다. 또한, 이를 중화하여 블록 이오노머를 제조하였다. 합청된 PS-b-P(tBA) 블록 공중합체는 분자량이 5000-10000 정도로 조절되었고, 분자량 분포도 1.2 이하로 비교적 좁게 나타났다. 공중합체는 $^1$H-NMR, FT-IR로 분석하였으며, DSC로 열적 성질을 측정한 결과, styrene의 비율이 더 많기 때문에 100 $^{\circ}C$ 근처에서 T$_{g}$가 나타났으며, TEM을 통해 이온 그룹의 상분리를 확인하였다.분리를 확인하였다.

Acrylic acid와 n-butyl acrylate로 grafts시킨 폴리에틸렌의 전기적 특성 (Electrical properties of acrylic acid and n-butyl acrylate grafted PE)

  • 이창용;김억;서광석
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1996년도 추계학술대회 논문집
    • /
    • pp.278-282
    • /
    • 1996
  • Electrical properties of acrylic acid and n-butyl acrylate grafted polyethylene were investicated. Charge accumulation characterist-ics of acrylic acid grafted PE are changed by graft ratio, but it remains not changed in n-butyl acrylate grafted PE. It was also observed that anti-treeing and AC breakdown strength of grafted PE were increased due to the graft ratio. The change of electrical properties of grafted PE were attributed to the polar group introduced by the graft reaction.

  • PDF

Radiation-Induced Graft Copolymerization of Acrylic Acid onto Polyester

  • Chang, Hoon-Sean;Kong, Young-Kun;Lee, Chong-Kwang;Park, Jae-Ho
    • Nuclear Engineering and Technology
    • /
    • 제9권2호
    • /
    • pp.65-74
    • /
    • 1977
  • High dose rates꼭 전자선을 이용하여 Polyester 직포에 acrylic acid를 중합 반응시켰다. Homopolymerization inhibitor로서 cation 을 첨가시키면 hoinopolymerization 뿐만 아니라 graft효율도 감소되었다. Graft 중합 반응 속도는 선량율이 1.6$\times$$10^{6}$rad/sec에서부터 10$\times$$10^{6}$ rad/sec 사이에서 선량율의 0.82승에 비례하였다. Acrylic acid가 graft 중합 반응된 Polyester 직포는 흡습성, 제전성 효과 등이 크게 증진되었다.

  • PDF

전자빔 가속기를 이용한 폴리프로필렌섬유의 개질(II) - 전자빔의 흡수선량 및 중합조건이 그라프트 공중합에 치는 영향 - (Electron Beam -Induced Graft Polymerization of Acrylic Acid on Polypropylene Nonwoven Fabrics(II))

  • 김홍제;;임용진;이기풍
    • 한국염색가공학회지
    • /
    • 제15권3호
    • /
    • pp.154-160
    • /
    • 2003
  • Polypropylene nonwoven fabrics were grafted with acrylic acid by a preirradiation method by using electron beam accelerator. The effect of irradiation dose, storage time, concentration of acrylic acid, reaction temperature, reaction time and Mohr's salt concentration on the degree of grafting were investigated in detail. The grafted Polypropylene nonwoven fabrics were characterized using IR spectroscopy and SEM. The results showed that the degree of grafting increased with increasing absorbed dose and the Mohr's salt in the acrylic acid solution promoted grafting efficiency.

Agar 그래프트 폴리아크릴산 겔의 흡수능 최적화 (Optimization of the Water Absorption by Crosslinked Agar-g-Poly(acrylic acid))

  • Wuttisela, Karntarat;Panijpan, Bhinyo;Triampo, Wannapong;Triampo, Darapond
    • 폴리머
    • /
    • 제32권6호
    • /
    • pp.537-543
    • /
    • 2008
  • Crosslinked agar-g-poly(acrylic acid) (x-agar-g-PAA) super absorbent with a water absorbency ($Q_{H2O}$) of approximately 660 g/g was synthesized by the copolymerization of agar with an acrylic acid monomer. KPS and MBA were used as the initiator and crosslinker, respectively. Grafting was performed in air. Infrared spectroscopy was used to identify the product of copolymerization. The optimum conditions to synthesize the x-agar-g-PAA superabsorbent were 0.1 g of agar, 0.1 g of the KPS initiator, for 15 min; 50% AA monomer, 0.005 g of the MBA crosslinker, for a propagation time of 5 min; and 1 M NaOH for 15 min to allow for saponification. The reaction temperature was $80{^\circ}C$.

Synthesis and Antimicrobial Properties of the Chitosan Derivatives

  • Lee, Eun Kyoung;Kim, You Kyoung
    • Elastomers and Composites
    • /
    • 제56권4호
    • /
    • pp.254-263
    • /
    • 2021
  • In this study, chitosan obtained after varying extents of deacetylation (i.e., 10%, 30%, and 47%) was employed to introduce antibacterial properties to chitin. The deacetylation reaction completion, wherein the amino group content of chitin was reduced, was ascertained from the FT-IR and NMR analyses. The 47%-deacetylated chitosan exhibited superior antibacterial properties against Bacillus in a disk diffusion test. To further improve these properties, chitosan derivatives were grafted by acrylic acid and acrylamide. The varying concentrations of carboxyl groups, primary amines, and -CH2-CH2- with increasing acrylic acid and acrylamide contents were determined by FT-IR and NMR analyses. The enhanced antibacterial properties of the chitosan derivatives, owing to the increased acrylic acid and acrylamide contents, were revealed by the disk diffusion test. In particular, the derivatives with 1.3% acrylic acid and acrylamide showed the highest antibacterial activity, the bacterial reduction rate against Staphylococcus aureus and Escherichia coli being 99.9%, as observed through the ASTM E2149 standard test.

UV조사에 의한 Poly(lactic acid)-g-Acrylic Acid 이온교환체의 합성 및 흡착특성 (Synthesis of Poly(lactic acid)-g-Acrylic Acid Ion Exchanger by UV Radiation Method and Metal Adsorption Properties)

  • 최은미;손복기;이창수;황택성
    • 폴리머
    • /
    • 제33권1호
    • /
    • pp.52-57
    • /
    • 2009
  • 본 연구는 UV 조사법으로 poly(lactic acid)-g-acrylic acid(PLA-g-AAc) 이온교환체를 합성하고 이들의 금속흡착 특성을 ICP-AES 분석을 통해 확인하였다. PLA-g-AAC의 UV 조사량과 AAc의 농도변화에 따른 함수율, 그래프트율 및 이온교환용량을 측정하였다. 그래프트율은 AAc 및 benzophenone(BP) 농도가 각각 1.0, 0.1 mol/L일때 최대 28%이었으며, 이온교환용량과 함수율은 각각 1.13 meq/g와 38%로 UV 조사량 및 AAc의 농도가 증가함에 따라 증가하였다. 한편, PLA-g-AAc의 흡착시간에 따른 $Cu^{2+}$, $Co^{2+}$, $Ni^{2+}$에 대한 선택 흡착성은 모두 높게 나타났으며 $Cu^{2+}$가 가장 우수한 선택흡착성을 나타내었다.

용액중합에 의한 편광필름용 아크릴 점착제의 합성에 관한 연구 (A Study on Synthesis of Acrylic Pressure Sensitive Adhesive for Polarizer Film by Solution Polymerization)

  • 임창혁;정영재;조을룡
    • Elastomers and Composites
    • /
    • 제44권2호
    • /
    • pp.175-181
    • /
    • 2009
  • 편광필름용 점착제를 합성하기 위해 아크릴 모노머를 사용하여 용액중합을 수행하였다. 아크릴 모노머는 2-ethylhexyl acrylate, butyl acrylate, acrylic acid를 사용하였으며, 개시제는 benzoyl peroxide, 용매는 ethyl acetate가 사용되었다. 모노머의 비율은 점착제의 유리전이온도 $-40^{\circ}C$에 맞추어 2-ethylhexyl acrylate: butyl acrylate: acrylic acid = 25:50:3.6 이였다. 개시제의 첨가량은 점착제의 젖음성과 초기점착력을 고려하여 모노머 대비 0.09%로 결정하였다. 모노머와 용매의 비율은 젖음성과 투과율을 고려하여 1:1.7로 하였다. 점착제 필름의 투과율은 점도가 낮을수록, 분자량이 작을수록, 분자들 간의 얽힘이 적어져서 굴절율이 낮아지고 투과율이 증가함을 알 수 있었다. 사용가능 기간의 측정에서 모노머와 용매의 비율이 1:1.7일 경우 점도가 200분이 지나도 커다란 변화가 없어 저장안정성이 좋음을 확인할 수 있었다.

방사선 그래프트 중합에 의하여 제조된 폴리(아크릴 산)이 그래프트된 탄소나노튜브에 생체분자 고정화에 관한 연구 (A Study on the Immobilization of Biomolecules on Poly(acrylic acid)-grafted MWCNTs Prepared by Radiation-Induced Graft Polymerization)

  • 정찬희;이병민;황인태;최재학;노영창;홍성권
    • 폴리머
    • /
    • 제34권2호
    • /
    • pp.150-153
    • /
    • 2010
  • 본 연구에서는 방사선에 의한 그래프트 중합을 이용하여 생체분자가 고정화된 다중벽탄소나노튜브 (MWCNT)를 제조하였다. 생체분자의 고정화를 위하여 MWCNT에 아크릴 산을 그래프트 중합하였다. 열중량분석과 라만 분석을 통하여 MWCNT에 폴리(아크릴 산)이 효과적으로 그래프트 중합되었음을 확인하였다. 폴리(아크릴 산)이 그래프트 된 MWCNT에 DNA와 단백질과 같은 생체분자들을 고정화하였다. X-선 광전자 분광법과 형광분석을 통하여 생체분자들이 성공적으로 MWCNT에 도입되었음이 확인되었다.

아크릴 점착제의 최적물성에 관한 연구 (A Study on Optimization of Physical Properties of Acrylic Pressure Sensitive Adhesives)

  • 변상훈;김중현
    • 공업화학
    • /
    • 제3권4호
    • /
    • pp.678-685
    • /
    • 1992
  • 기능성 단량체가 점착물성에 미치는 영향을 알아보기 위하여 아크릴산과 기타 단량체로 아크릴 수지를 라디칼 용액중합을 이용하여 4원공중합시킨 후 물성을 측정하였으며, 또한 최적 점착 물성을 얻기 위하여 통계적 분석 방법을 이용하여 검토하였다. 점착물성에 있어서 아크릴산이 아크릴아미드보다 점착력의 증가에 미치는 영향이 컸다. 반면에 tackiness의 감소에 있어서는 아크릴아미드의 영향이 아크릴산 보다 컸다. 통계적 방법을 인용하여 점착물성 중 점착력, tackiness 그리고 응집력을 최적화 시킨 결과 단량체의 성분 비율은 부틸 아크릴레이트 81.7 mole%, 아크릴산 8.0 mole%, 아크릴아미드 2.1 mole%, 비닐아세테이트 8.2 mole% 일 때로 나타났고 이 때의 추정 회귀식은 다음과 같았다. $D=.857+.072X_1-.114X_2-.027X_3-.126X_1{^2}-.046X_1{\cdot}X_2-.063X_1{\cdot}X_3-.152X_2{^2}+.027X2{\cdot}X_3-.120X_3{^2}$ $X_1$:coded acylic acid, $X_2$:coded acylamide, $X_3$:coded vinylacetate

  • PDF