• Bulletin of the Korean Chemical Society
• /
• v.26 no.8
• /
• pp.1235-1240
• /
• 2005

A combination of electrospray ionization and tandem mass spectrometry was used to characterize the scavenging reactions of acrylamide (AA) in the presence of glutathione (GSH) in vitro. In the presence of GSH, AA was deactivated effectively and scavenged by reactions consuming small amount of GSH. Reaction products and structural information were identified using collision-induced dissociation (CID) in an ion trap mass spectrometer. In the mixture of GSH and AA, significant increase in abundance of fragment ion peak was observed at m/z 233, which was identified as $[Cys-Glu]^+$, formed by the elimination of glycine moiety of GSH. GSH also contributes to the AA scavenging reaction by conjugating with AA through the sulfhydryl group in cysteine moiety. The probable scavenging reaction pathway of AA in the presence of GSH has been proposed based on the CID experimental data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.8
• /
• pp.2005-2014
• /
• 2009

There are several methods to fabricate Polymer Dispersed Liquid Crystal(PDLC) films. One of them, so-called Nematic Curvilinear Aligned Phase(NCAP) film, is based on emulsion technology. To produce NCAP systems various water soluble polymers, such as partially hydrolyzed polyvinylalcohol(PVA) and polyvinyl pyrrolidone(PVP), which can form stable emulsion of liquid crystal(LC) without any stabilizers were used. In this work, we studied the dependence of emulsion stability on nature and composition of copolymers composed of water-soluble and water-insoluble moiety. We found that interfacial surface tension depends on the composition of comonomer, the copolymer concentration in the water, and the nature of hydrophobic chain. The Acrylamide -styrene(AA-ST) copolymer showed the lowest interfacial surface tension among the tested copolymers at the same concentration. Since the interfacial surface tension decreases with increasing the compatibility of copolymer with LC phase the AA-ST copolymer has the best compatibility with LC molecules. It is believed that molecules adsorbing easily on the surface of LC droplets allows the LC emulsion system to be more stable.

• Journal of the Optical Society of Korea
• /
• v.11 no.4
• /
• pp.183-191
• /
• 2007

The highest diffraction efficiency(DE) value after illumination and post-curing of photopolymer films were obtained at the $SeO_2$/Acrylamide(AA) Ratios of AA 3.0 g, $SeO_2$ 1.0g and the DE's were stable values of over 90%. By the addition of $SeO_2$, the maximum DE at the initial stage of illumination was reached at 300 seconds, which suggests $SeO_2$ slows down the photopolymerization of AA, which enhances the maximum DE value by giving more migration time. DE variation curve for the optimum composition during extended-time illumination of 9,000 seconds resembles a sine curve due to the combination of the monomer diffusion and the photopolymerization, and the photopolymer film expanded by about 8% after photopolymerization due to monomer migration.

• Textile Coloration and Finishing
• /
• v.12 no.1
• /
• pp.61-67
• /
• 2000

This study was carried out to develope antimicrobial artificial suede by coating with water soluble polyurethane resin and the copolymer of N,N'-dialkyl-N,N'-dialkyl ammonium chloride (DADAAC) and acrylamide as a antimicrobial additve. The copolymer of DADAAC and acrylamide was synthesized by free radical initiation and intra-intermolecular propagation, and the prepared copolymers had sufficient compatibility with water soluble polyurethane resin. The MIC values of the prepared copolymers and antimicrobial characteristics of the artificial suede coated by polyurethane were evaluated. With the increase in the proportion of DADAAC, which is antimicrobially active part in the DADAAC/acrylamide copolymers, the MIC value becomes lower. The MIC value of DADAAC-AA (1 : 1) copolymer is below 30 ppm against S. aureus, and below 90 ppm against K pneumoniae. The artificial suede coated by water soluble polyurethane resin with 1.0% owl concentration of DADAAC/acrylamide copolymer has good antimicrobial fastness as to show colony reduction of above 90% and 80% against S. aureus and K. pneumoniae respectively in the shake flask test after 10 times of washing, and above 95% and 85% after 10 times of dry-cleaning. The elastic recovery of coated suede fabric is not affected up to 1.0% owf concentration of DADAAC-AA copolymer in the polyurethane coating.

• Journal of Environmental Health Sciences
• /
• v.42 no.4
• /
• pp.235-245
• /
• 2016

Objectives: This study estimated the adult Korean daily intake of acrylamide (AA) and investigated its relationship with demographic, lifestyle and dietary habits by using urinary concentrations of N-acetyl-S-(2-carbamoylethyl)-cysteine (AAMA). Methods: Human data (n=1870) was collected in a nationwide cross-sectional biomonitoring program representing the population (18-69 years) residing in South Korea. Urinary AAMA was analyzed with a LC-MS/MS system. Daily intakes of AA were estimated using mass daily AAMA, which was calculated through urinary AAMA concentration and daily creatinine excretion. Statistical analysis was performed with SAS procedures for calculating geometric means, confidence intervals and the exponentiated beta coefficient of multiple linear regressions. Results: Daily intake of AA was estimated at $0.475{\mu}g/kg$ body weight (BW) per day (95% confidence interval (CI): 0.447-0.503). In the case of current smokers, AA intake was $0.957{\mu}g/kg$ BW per day (95% CI: 0.847-1.067), which was significantly higher than that of former smokers and never smoked (p<0.0001). The strong affecting factors were age (95% CI: 0.68-1.14; p=0.0180), education level (95% CI: 1.05-1.42; p=0.0163), body mass index (BMI) (95% CI: 1.00-1.82; p<0.0001), and smoking status (95% CI: 0.97-3.05; p<0.0001). Korean dietary habits increasing AA intake were coffee (p=0.0005), cup noodles (p=0.0010) and canned foods (p=0.0005). Meanwhile, foods decreasing AA intake were fresh fruit (p=0.0076), cooked beef (p=0.0335) and cooked pork (p=0.0147). Conclusion: The Korean daily intake of AA in adults was estimated to be similar with those found in developed countries. The factors increasing daily AA intake were coffee, cup noodles and canned foods, and decreasing factors were fresh fruit, cooked beef and cooked pork.

• Textile Coloration and Finishing
• /
• v.10 no.6
• /
• pp.49-54
• /
• 1998

The antimicrobial activities of the copolymer of N,N'-dimethyl-N,N'-diallyl ammonium chloride (DMDAAC) and acrylamide(AA) were investigated. A series of copolymers with various ratios of DMDAAC and AA were prepared by free radical initiation via an intra-intermolecular propagation mechanism, ie, cyclopolymerization, and the antimicrobial activities of the prepared copolymers were measured by minimum inhibitory concentration(MIC) test. The copolymers were, then, methylolated under basic condition for reactivity with hydroxyl group of cellulose. Both antimicrobial activity and fastness to laundering of the cotton fabrics finished using the methylolated copolymers were evaluated. From the results it was shown that the copolymers with different ratios of DMDAAC and AA have MIC values in the range of 1∼100ppm. As the ratio of AA in the copolymers increases, the anitmicrobial activity decreases. The fastness of the cotton fabric finished by the methyolated copolymers to 10 repeated launderings in anionic commercial detergent is good enough to show colony reduction above 90％ regardless of DMDAAC and AA ratios.

• Elastomers and Composites
• /
• v.39 no.3
• /
• pp.209-216
• /
• 2004

Two types of polyurethane-acrylate polymer were synthesized by reaction of 2-hydroxyethyl methacrylate(HEMA), acrylamide(AA), and polyurethane prepolymer. Water-soluble cationic polyurethane/acrylate retention aids were prepared by using polyurethane-acrylate, benzyl chloride and distilled water. The retention, drainage and strength properties of the retention aids were investigated. The retention of cationic polyurethane/acrylate type retention aids maintained around 70 % regardless of nm. COD value of white water was much reduced by adding the retention aids to it. Drainage property was also improved by addition of the retention aids. In addition, specific compression strength of the paper was improved a little by addition of the retention aids. PU-HEMA type showed better performance than PU-AA in terms of compression strength of the paper.

• Polymer(Korea)
• /
• v.33 no.1
• /
• pp.45-51
• /
• 2009

Water soluble adhesive was polymerized from butyl acrylate (BA), methyl methacrylate (MMA) and one of various functional monomers such as acrylic acid (AA), 2-hydroxylethyl methacrylate (2-HEMA), glycidyl methacrylic acid (GMA) and acrylamide (AAm). The amount of the functional monomers was 1$\sim$5 wt%/monomer. In order to improve the adhesive power, a substrate was treated using atmospheric flat plasma method. The adhesive power was improved by the addition of the functional monomers with an order of AA> 2-HEMA> GMA> AAm. The holding power of the adhesives, which is related with the thermal properties of the adhesives, increased with the amount of the functional monomers. The effectiveness in improving the holding power has an order of AA > AAm > GMA > 2-HEMA. By treating a substrate with atmospheric flat plasma method, the adhesives containing each of AA, 2-HEMA, GMA and AAm showed the increases of the final adhesion strength by 9.1, 9.4, 9.4, and 1.8%, respectively. In conclusion, the mechanical properties such as adhesive power and holding power could be controlled by introducing.

• Macromolecular Research
• /
• v.14 no.3
• /
• pp.324-330
• /
• 2006

Four different molecularly imprinted polymers (MIPs) were prepared using resveratrol as the template, methacrylic acid (MAA) or acrylamide (AA) as functional monomers, 2,2-azobisisobutyronitrile (AIBN) as the initiator, and thermo- or photo-induced polymerization. The ability of the different polymers to rebind selectively not only the template but also other phenols was evaluated. In parallel, the influence of the different templates and functional monomers used during polymer syntheses on the performance of the obtained MIPs was also studied through different rebinding experiments. The binding ability and selectivity of the polymer were studied by static balance method and Scatchard analysis. It was concluded that AA-based polymer by photo-induced polymerization presents the best properties to be used as a selective absorbent for the extraction of resveratrol.

• Korean Chemical Engineering Research
• /
• v.52 no.6
• /
• pp.814-820
• /
• 2014

In this work, hydrate inhibition performance of water-soluble polymers including pyrrolidone, caprolactam, acrylamide types were evaluated using torque measurement and high pressure differential scanning calorimeter (HP ${\mu}$-DSC). The obtained experimental results suggest that the studied polymers represent the kinetic hydrate inhibition (KHI) performance. 0.5 wt% polyvinylcaprolactam (PVCap) solution shows the hydrate onset time of 34.4 min and subcooling temperature of 15.9 K, which is better KHI performance than that of pure water - hydrate onset time of 12.3 min and subcooling temperature of 6.0 K. 0.5 wt% polyvinylpyrrolidone (PVP) solution shows the hydrate onset time of 27.6 min and the subcooling temperature of 13.2 K while polyacrylamide-co-acrylic acid partial sodium salt (PAM-co-AA) solution shows less KHI performance than PVP solution at both 0.5 and 5.0 wt%. However, PAM-co-AA solution shows slow growth rate and low hydrate amount than PVCap. In addition to hydrate onset and growth condition, torque change with time was investigated as one of KHI evaluation methods. 0.5 wt% PVCap solution shows the lowest average torque of 6.4 N cm and 0.5 wt% PAM-co-AA solution shows the average torque of 7.2 N cm. For 0.5 wt% PVP solution, it increases 11.5 N cm and 5.0 wt% PAM-co-AA solution shows the maximum average torque of 13.4 N cm, which is similar to the average torque of pure water, 15.2 N cm. Judging from the experimental results obtained by both an autoclave and a HP ${\mu}$-DSC, the PVCap solution shows the best performance among the KHIs in terms of delaying hydrate nucleation. From these results, it can be concluded that the torque change with time is useful to identify the flow ability of tested solution, and the further research on the inhibition of hydrate formation can be approached in various aspects using a HP ${\mu}$-DSC.