• Journal of the Korean Home Economics Association
• /
• v.11 no.3
• /
• pp.285-298
• /
• 1973

The colorfastness of dying persipiration and laundry on summer clothing must be considered, because it has special relation to the human body. The colors of fibers as cotton, p/c, acryl, polyester and nylon which have been widely used for blouse and T-Shirt of Knitted wear are R-P, Y-G, BI-B and print. Studies were carried out with persipirometer, for the natural fiber of cotton the chemical one of nylon, with additional stuff involved, which polluted. The experiment was conducted to colorfastness with acid solution and alkaline solution to see the alteration of color and staining of man-made persiperation. The results obtained from this experiment can be summerized as follows. 1. The order of color alteration isnylon < p/c < coton < polyester < acryl, and the nylon shows the lowest colorfastness, which is 3 class, and the acrly shows the highest colorfateness, which is 5 class. The staining of multifiber test of cotton fabric is nylon < p/c < polyester < cotton < acryl. The staining of multifiber of nylon fabric is nylon polyester < p/c < cotton < acryl. 2. In acid solution and alkaline solution, the alteration of color and staining makes almost no difference, but concerning staining of cotton, the acid solution is lower than the case of alteration solution only. 3. In the pollution on cotton and nylon, the latter is more easily polluted than the former regardless of fabrics. Especially in case of polluted nylon, ti shows the lowest color fastness (2 class), which causes a problem of the dying process and dye stuffs. 4. No difference of color alteration shows among them, but R-P and print show low color fastness (2 class), especially printed nylon shows the lowest value (1 class).

• Journal of the Korea Convergence Society
• /
• v.9 no.4
• /
• pp.93-98
• /
• 2018

This study was wanted to confirm ability for UV blocking according to its material. The lenses materials were Acryl, CR-39, NK-55, and MR-8. It was grouped: Group A consisting of anti-scratch hard coated lenses and anti-refractive multi coated lenses, Group B added UV blocking coating on the group A, and Group C consisting of only UV blocking lenses. The results measured UV transmittance, On the UV-A wavelength, Group A showed the UV transmittance of 7.726%, 0.043%, 0.007%, and 0.007% respectively. Group B showed 0.038%, 0.037%, 0.007%, and 0.007%, respectively. The UV-blocking performance of CR-39 has been greatly improved. Group C has shown the best UV blocking function; only 0.005% and 0.004% of UV transmittances.(1.60 and 1.67 index of refraction respectively). For the low power of lenses and sunglasses, the CR-39 lens is the most used. Therefore, to UV blocking from the lens, new materials or UV absorbers or UV coating technology and development of Converged Technologies are required.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.449-452
• /
• 2008

Reinforced concrete structure with supplementary relation is a distinguished material. But in this structure, crack is generated by many factors and caused decadence of durability, safety, function, and so on. Hence structure is in need of repair. Preexistence injection of chemical grouting for using repair of crack not enough performance. In this study, Setting time test of Acryl Gel was carried out According to a Catalyzer quantity. The result of test showed that gel time of Acryl Gel decreased with the increased of catalyzer quantity. The result of this study could be used as the basic data for the repair of crack using Acryl Gel.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.10
• /
• pp.1651-1655
• /
• 2007

Rod-like polymerizable LC molecules having two different reactive groups, i.e. acryl and diacetylene groups were prepared. 4-Hydroxyphenyldiacetylenes were synthesized by the coupling reaction of 1-bromoalkynes with 4-ethynylphenol and then reacted with 4-(6-acryloyloxyalkyloxy)benzoic acid to give polymerizable LC molecules 4a-d. The mesomorphic properties of compounds 4a-d were investigated by differential scanning calorimetry, polarized optical microscopy and X-ray diffractometry. Compounds 4a-c exhibited smectic and nematic phases, but compound 4d having a longest alkyl tail among the series formed only a smectic phase. Photopolymerizability of acryl and diacetylene groups was investigated by IR spectroscopy. An anisotropic polymer film could be prepared by selective polymerization of acryl groups with 365 nm UV light in the presence of a photoinitiator (2,2-dimethoxy-2-phenylacetophenone). The subsequent reaction of diacetylene groups with 254 nm UV light disrupted the anisotropic structure, suggesting that these LC molecules could be used for imaging on the film.

• Journal of the Korea Furniture Society
• /
• v.10 no.1
• /
• pp.65-71
• /
• 1999

The bending performance of sloped finger-jointed Rhus verniciflua were tested in order to improve the strength properties of finger-joint. Sloped finger-cut pieces were jointed with three kinds of adhesives (polyvinyl acetate, polyvinyl-acryl acetate and oilic resin). The slope ratios of finger joints were 0, 1.0, 1.5, and 2.0. The MOE, MOR and deflection to maximum load in bending of sloped finger-joints and solid wood specimen were measured. The results were : 1) The efficiencies of MOE to finger and sloped finger-joints to the solid wood were almost same in the three kinds of adhesives(polyvinyl acetate, polyvinyl-acryl acetate and oilic urethane resin) and there were some effect of slope on the MOE in a sloped finger-joint for three kinds of resin adhesives. 2) There was the effect of slope on the MOR in sloped finger-joints in every kind of adhesive. The efficiencies of MOR in slope ratios of 0 and 2.0 ranged 65-79%, respectively. There was also a slight effect of the kinds of adhesives on the MOR. However, the efficiencies of deflection to the urethane resin adhesive were much less than those of polyvinyl acetate, polyvinyl-acryl acetate resin adhesives except the slope ratio of 0. 3) It might be impossible to estimate the bending stregth of sloped finger-jointed Rhus verniciflua by using MOE. The correlation coefficient(0.192) between MOE was very low and not significant at 5% level.

• Applied Chemistry for Engineering
• /
• v.16 no.1
• /
• pp.39-44
• /
• 2005

In this study, polyurethane-acryl emulsion resins were synthesized from HDI (hexamethylene diisocyanate), IPDI (isophorone diisocyanate), Polyol, 2-HEMA (2-hydroxy ethylmethacrylate), n-BA (n-butyl acrylate) and MMA (methylmethacrylate). The effects of polyol types on the properties of polyurethane-acryl emulsion resin, such as degree of strength and water resistance and on the manufacturing process were investigated. In addition, the results were compared with those of acrylic emulsion. The test results showed that polyester type polyol demonstrated stronger tensile strength and higher water resistance with time than did acrylic emulsion and polyether type polyol.

• Journal of the Korea Furniture Society
• /
• v.10 no.2
• /
• pp.73-78
• /
• 1999

This paper describes the relationship between the bending strength properties of sloped finger-jointed woods and the acoustic emissions(AEs) generated during the test. Rhus verniciflua pieces were cut in sloped-finger types and glued with three kinds of adhesives(polyvinyl acetate, polyvinyl-acryl acetate and oilic urethane resin). The slope ratios of finger joints were 0, 1.0, 1.5, and 2.0. The AE cumulative event count and cumulative count were measured during the bending test. The results were as follows: The lower the bending strength(load) was, the generation time of AE event count got and the higher the increasing rate of AE event count became in the sloped finger-jointed specimens bonded with polyvinyl acetate, polyvinyl-acryl acetate oilic urethane resin adhesives. Therefore, the slope from load-AE cumulative event count was very steep. The patterns of AE event count and count were very similar. The relationship between the MOR and the AE parameter from load and AE cumulatve event count in the early stage of the sloped finger-jointed specimens bonded with polyvinyl acetate, polyvinyl-acryl and oilic urethane resin adhesives was much greater than that between the MOE and the MOR. Therefore, the AE signals obtained during bending test are useful for estimating the strength of sloped finger-jointed Rhus verniciflua specimens.

• Elastomers and Composites
• /
• v.35 no.3
• /
• pp.196-204
• /
• 2000

SBR, polyurethane, acryl and epoxy latex were separately mixed with ethylene -vinylacetate emulsion(EVA) in the range of $0{\sim}50wt%$. For the mixtures, the various physical properties such as defoamerability, mechanical property, and water resistance were experimentally examined. The excellent defoamer was BYK-021 and the appropriate use of it was 0.3 phr for the total components. The shrinkage of compounds was influenced by the compatability of resins and the formation of voids. The mechanical properties was related to the cohesive force of resin particles, the coagulation of cement particles and the co-bonding of resin particles with cement particles. Mixing latex separately showed better properties then non-mixing in the shrinkage ratio, flexural strength, adhesive strength, and impact strength. The water resistance of composites mixed with cement was worse than that of EVA resin.

• Journal of radiological science and technology
• /
• v.21 no.2
• /
• pp.36-42
• /
• 1998

Treatment of a large diseased area with electron often requires the use of two or more adjoining fields. In such cases, not only electron beam divergence and lateral scattering but also fields overlapping and separation may lead to significant dose inhomogeneities(${\pm}20%$) at the region of junction of fields. In this study, we made Acrylic Electron Wedges to improve dose inhomogeneities(${\pm}5%$) in these junction areas and to apply it to clinical practices. All measurements were made using 6, 9, 12, 16, 20 MeV Electron beams from a linear accelerator for a $10{\times}10\;cm$ field at 100cm of SSD. Adding a 1 mm sheet of acryl gradually from 1 mm to 15 mm acquires central axis depth dose beam profile and isodose curves in water phantom. As a result, for all energies, the practical range was reduced by approximately the same distance according to the acryl insert, e.g. a 1 mm thick acryl insert reduces the practical range by approximately 1 mm. For every mm thickness of acryl inserted, the beam energy was reduced to approximately 0.2 MeV. These effects were almost Independent of beam energy and field size. The use of Acrylic Electron Wedges produced a small increase(less than 3%) in the surface dose and a small increase(less than 1%) in X-ray contamination. For acryl inserts, thickness of 3 mm or greater, the penumbra width increased nearly linear for all energies and isodose curves near the beam edge were nearly parallel with the incident beam direction at the point of penumbra width($35\;mm{\sim}40\;mm$). We decide heel thickness and angle of the wedge at this point. These data provide the information necessary to design Acrylic Electron Wedge which can be used to improve dose uniformity at electron field junctions and it will be effectively applied to clinical practices.

• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.315-320
• /
• 2012

Ultra violet (UV) curable pressure sensitive adhesives (PSA) were prepared by controlling both the structure of acryl copolymer and the functionality and content of multi-functional monomers. Acryl copolymer worked as the base polymer for giving the tackiness. Multi-functional monomers were used to vary the crosslinked structure and the degree of crosslink. Acryl copolymer showed the reduced peel strength after UV curing by decreasing the content of 2-ethylhexyl acrylate in the monomer composition. Both the peel strength of PSA and the content of residue found on silicon wafer decreased after UV curing by increasing the functionality of multi-functional monomers. UV curable PSA containing 20 phr six-functional monomer showed the higher peel strength before UV curing and the lower peel strength and the least residue on silicon wafer after UV curing.