• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1559-1564
• /
• 2011

This study presents the development of a machine vision inspection system(MVIS) purposely for car seat frames as an alternative for human inspection. The proposed MVIS is designed to meet the demands, features and specifications of car seat frame manufacturing companies in striving for increased throughput of better quality. This computer-based MVIS is designed to perform quality measures by detecting holes, nuts and welding spots on every car seat frame in real time. In this study, the NI Vision Builder software for Automatic Inspection was used as a solution in configuring the aimed quality measurements. The techniques for visual inspection are optimized through qualitative analysis and simulation of human tolerance on inspecting car seat frames. Furthermore, this study exemplifies the incorporation of the optimized vision inspection environment to the pre-inspection and post-inspection subsystems. The system built on this proposed MVIS for car seat frames has successfully found the possible detections.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.4 no.2
• /
• pp.185-191
• /
• 2000

The safety problem of aged tunnels has been emphasized. For the effective maintenance, site inspection of tunnel structures and surrounding grounds are required periodically. Also, the determination of safety of tunnels is not a simple problem. So the role experienced engineer in the maintenance is very important and development of an expert system that can perform as the engineers, has been needed. In this study, from the results of numerical analysis in several case, new precision inspection rules which can substitute actual numerical analysis are determined by a commercial program FLAC and regression analysis under various parameters such as material property, lining thickness, overburden and laterial coefficients. They are added to the knowledge base to determine safety of tunnel lining. To verify the expert system, the results are compared with an existing tunnel diagnosis report. It can be concluded that the new rule are well represented the actual numerical analysis under various site conditions. Therefore it is expected that the systematic management for effective maintenance of tunnel structure will be possible.

• Journal of Aerospace System Engineering
• /
• v.15 no.1
• /
• pp.63-71
• /
• 2021

The South Korean Navy has operated Harpoon guided missiles through step-by-step acquisition after adopting them for the first time in 1978. As Harpoon guided missiles have been operated for a long time, it is necessary to make an active follow-up logistics support to guarantee their performance. Inspection of guided missiles is a basic activity to check the status of missiles. This study was conducted to check if the existing inspection interval of Harpoon guided missiles that have been operated for a long time was appropriate. Regarding research methods, based on the Navy's field operation materials, this study analyzed and presented inspection interval by section according to the period of operation, utilizing the Martinez's theory and a non-parametric MCF technique.

• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.305-307
• /
• 2004

One set of rotor coils is required per each large generator rotor assembly, Rotors consist of two directly opposing poles. Each pole requires from 5 to 9 coils. Each coil is made up of two halves identified on the connection end. These coil halves will be joined together by butt brazing process during subsequent rotor assembly. Each half coil is made up of typically 4 to 9 layers of copper conductors. Because of Generator rotor is rotated very high speed with 3,600RPM, the quality soundness of brazed joints is very important at each coil. But, it is very difficult to be optimized non-destructive evaluation, because c-coil has the long shape and evaluation is to be done assembled condition. In this paper introduce newly developed inspection process and acceptance standards for the ultrasonic inspection of " C" coil butt braze. This inspection system is a semi-automatic ultrasonic flaw detector with data acquisition and retention capable of assessing the relative lack of bond of brazed butt joints

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.11
• /
• pp.974-978
• /
• 2013

AVI (Automatic Vision Inspection) systems automatically detect defect features and measure their sizes via camera vision. AVI systems usually report different measurements on the same defect with some variations on position or rotation mainly because different images are provided. This is caused by possible variations from the image acquisition process including optical factors, nonuniform illumination, random noises, and so on. For this reason, conventional area based defect measuring methods have problems of robustness and consistency. In this paper, we propose a new defect size measuring method to overcome this problem, utilizing volume information that is completely ignored in the area based defect measuring method. The results show that our proposed method dramatically improves the robustness and consistency of defect size measurement.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.197-200
• /
• 2002

We newly developed the procedures of X-ray Cargo inspection system with acquisition of multi-channel data, analog to digital converter and post logic circuit which is controlled by the FPGA. The IEEE1149.1 standard defines a four-wire serial interface(a fifth wire is optional)to access complex integrated circuits(ICs) such as PLD. This paper describes that Boundary_Scan test method applied to our home made cargo inspection system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.6
• /
• pp.988-994
• /
• 2017

The risk of facilities in catenary is increasing because the railway section extension and high-speed train service. And visual check of workforce is not enough time to maintain the extensive railway facilities. Accordingly, The technical development trend of maintenance of railway facilities can be seen by automation and application of IT technology, especially the mechanization work and the information technology are spreading in the maintenance work of the train line solved by manpower. In this paper, we describe the method by obtaining the cantilever image using acquisition device and pole inspection system in high speed vehicle, to check the variation of the cantilever component using image processing.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.193-194
• /
• 2017

In this research, the density value of the turbid solution is measured by using the principle of inexpensive but easy Hydrometer method for cement delivered to the actual raw concrete plant, By analyzing the correlation of powder aid, we will try to present a scheme that can be utilized as a method of acquisition acquisition inspection. As a result of the analysis, it was found that there was a large difference between the measured powders assisted with cement powder on the report, and the correlation with the actually measured powder aid Hydrometer density value was good. Therefore, using the method of Fig. 3, it was possible to know that the degree of powder quality of cement delivered to the raw concrete factory can be evaluated quickly and utilized at the time of argument inspection.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05a
• /
• pp.108-112
• /
• 2010

Confocal Imaging System is an essential machine for a wide range of inspection wafer. For concurrent and fast acquiring the image data of four channels, the new image acquisition system used the protocol of camera-link standard with the full mode of configuration in interconnection with a frame grabber integrated in a computer, which is popularly used for many cameras, so the programming environment of image processing is optional such as Visual C++, Matlab. In addition, many conventional methods were coordinately used for contribution to build the high quality of images for precise processing analog signals of PhotoMutiplier Tubes(PMTs), accurate control of scanning device, sensitivity of PMTs, and laser source. The prototype of new image acquisition system, could meet the goal of development, it is used in LSCM for high content screening to investigation the processes of elements of living specimens at the same time by simultaneous grab image data on 4 PMTs channels.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.5
• /
• pp.13-18
• /
• 2018

In this research, regarding the type three blast furnace slag (BS) regulated by KS F 2563 and supplied to actual ready mixed concrete plant, the fineness on specification and actually measured fineness by Blain test were compared, and by applying the hydrometer method used for early prediction of concrete strength, the feasibility of the hydrometer method for acquisition inspection of BS was analyzed. Additionally, the influence of various fineness of BS on properties of cement mortar was also assessed. According to the experimental results of this research, correlation of fineness values between specification and actually measured data were not matched. In the case of the rapid evaluation method using hydrometer, a good relation was shown between the fineness data obtained from hydrometer and Blain test. furthermore, from the cement mortar properties test, there was a good relation was obtained between fineness data from rapid evaluation method by hydrometer and cement mortar properties, while there was no clear relation between fineness data from specification and cement mortar properties. Hence, as a qulity controlling method of BS fineness, a rapid evaluation method using hydrometer is suggested as a new method.