• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.193-194
• /
• 2017

In this research, the density value of the turbid solution is measured by using the principle of inexpensive but easy Hydrometer method for cement delivered to the actual raw concrete plant, By analyzing the correlation of powder aid, we will try to present a scheme that can be utilized as a method of acquisition acquisition inspection. As a result of the analysis, it was found that there was a large difference between the measured powders assisted with cement powder on the report, and the correlation with the actually measured powder aid Hydrometer density value was good. Therefore, using the method of Fig. 3, it was possible to know that the degree of powder quality of cement delivered to the raw concrete factory can be evaluated quickly and utilized at the time of argument inspection.

• Journal of Biosystems Engineering
• /
• v.14 no.3
• /
• pp.207-214
• /
• 1989

In this study, impact force and angular displacement of the pendulum were measured by the load cell and potentiometer. Mechanical behavior of rough rice under impact loading was able to analyze precisely and efficiently, because measured data were accumulated and handled by the automatic data acquisition system making use of microcomputer system. Impact force and angular displacement were measured with a resolutiln of 1/1500 seconds in time. Mechanical behavior such as force and energy at rupture point of Japonica type and Indica type rough rice were measured with this system. After impact loading, the damage of rough rice was examined with the microphotograph and an allowable impact force was measured. The results obtained in this study are summarized as follows. 1. Machanical behavior of rough rice under impact loading was analyzed precisely and efficiently because measured data were accumulated and handled by this data acquisition system. 2. Rupture force and rupture energy of rough rice were appeared to be the lowest value in the range of 16 to 18 % moisture content, and rupture force and rupture energy of Japonica type were higher than those of Indica type in each level of moisture content. 3. From the result of the damage examined after the impact loading, allowable impact force was the lowest in the range of 16 to 18 % moisture content, and the value of the allowable impact force of Japonica type was higher than that of Indica type in each level of moisture content.

• Journal of Korean Society for Quality Management
• /
• v.46 no.4
• /
• pp.821-842
• /
• 2018

Purpose: To derive key requirements and key technologies for weapon system acquisition business by using Qualify Function Deployment (QFD), and to reduce business cost by setting the target performance and key expense of weapon system. Methods: We propose a QFD methodology that can induce rational decision-making by translating analyst's subjective opinions into quantitative values when analyzing requirements at the initial stage of weapon system development project. Based on QFD methodology, QFD application model combining house of quality, value engineering, and analogy cost estimating technique is presented. Results: It was possible to analyze the specific requirements necessary for the development of the weapon system, to solve the communication problem of the participants, to set clear development direction and target. Conclusion: By applying the QFD application model at the early stage of the weapon system acquisition project, it is possible to reduce the business cost by establishing clear development direction and goal through the procedural analysis process.

• Korean Journal of Food Science and Technology
• /
• v.24 no.6
• /
• pp.524-527
• /
• 1992

To measure of important variables such as temperature, weight, and relative humidity in food processing process, computer-aided data acquisition system was composed of 16 bit microcomputer and PCL-711S interface board. Process variables in dehydration and storage of food were measured through sensors, converters, and computer system which were operated by the PC-LabDAS software for data acquisition, process control, and data analysis. The relationship between measured values of process variables and the output voltages of ADC showed more than 0.99 in $r^2$ value. Response time of sensors was enough fast to measure minute values changed in a moment.

• Journal of Magnetics
• /
• v.21 no.1
• /
• pp.148-152
• /
• 2016

The main goal was to evaluate effectiveness of a modified TSE sequence compared with DIR (double inversion recovery) sequence in acquisition of fast flow brain vessel images using signal void effect. 32 healthy volunteers (10 men and 22 women; mean age of 31 years; ranging between 28-43 years) who underwent black blood DIR sequence (group A) and the modified TSE sequence (group B) were enrolled in our study. Signal to Noise Ratio (SNR) and Contrast to Noise Ratio (CNR) of the internal carotid arteries' lumen were compared in T1 and T2 weighted images for both group A and B. The images obtained from group B showed lower SNR values in internal carotid artery than the group A in both of the T1 and T2 weighted images (11.49% and 13.66% respectively). While the CNR values were higher in the group B than the group A in both of the T1 and T2 weighted images (8.69% and 7.55 % respectively). The qualitative score of all categories were not significantly different between the two groups. Furthermore approximately 49% of the total scan time was reduced from group B. Our study is to shorten the scanning time and minimize the inconveniences of the patients in acquisition of the black blood images of brain by using the signal void effect in the modified TSE technique while keeping the diagnostic value of the test.

• The Korean Journal of Archival Studies
• /
• no.42
• /
• pp.185-211
• /
• 2014

This paper is a discussion on the archival appraisal system that operates to document big events of the society or major public policies. The writer brought up three suggestions; the first is to develop documentation strategy to select archives at the same time it is created. This means that what matters is the scenes contained in the archives, and therefore they must reflect as wide social context as possible, which the writer considered as being caused by the change of thinking on the value of archives. The second is to develop tools to acquire archives that satisfy such strategy. The third is the sustainability of such documentation strategy and archival acquisition methods. Regarding this point, the writer discussed the problems of current national archival system of Korea.

• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.222-228
• /
• 2023

This study aimed to analyze the applicability of the improved median filter in positron emission tomography (PET)/magnetic resonance (MR) fusion images based on parallel imaging using generalized autocalibrating partially parallel acquisition (GRAPPA). In this study, a PET/MR fusion imaging system based on a 3.0T magnetic field and ¹⁸F radioisotope were used. An improved median filter that can set a mask of the median value more efficiently than before was modeled and applied to the acquired image. As quantitative evaluation parameters of the noise level, the contrast to noise ratio (CNR) and coefficient of variation (COV) were calculated. Additionally, no-reference-based evaluation parameters were used to analyze the overall image quality. We confirmed that the CNR and COV values of the PET/MR fusion images to which the improved median filter was applied improved by approximately 3.32 and 2.19 times on average, respectively, compared to the noisy image. In addition, the no-reference-based evaluation results showed a similar trend for the noise-level results. In conclusion, we demonstrated that it can be supplemented by using an improved median filter, which suggests the problem of image quality degradation of PET/MR fusion images that shortens scan time using GRAPPA.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.4
• /
• pp.29-41
• /
• 2014

The Korean government has purchased land properties alongside any significant water bodies before setting up the buffers to secure water qualities. Since the annual budgets are limited, however, there has always been the issue of which land parcels ought to be given the priority. Therefore, this study aims to develop efficient mechanism for land acquisition priorities in stream corridors that would ultimately be vegetated for riparian buffer zones. The criteria of land acquisition priority were driven through literary review along with experts' advice. The relative weights of their value and priorities for each criterion were computed using the Analytical Hierarchy Process(AHP) method. Major findings of the study are as follows: 1. The decision-making structural model for land acquisition priority focuses mainly on the reduction of non-point source pollutants(NSPs). This fact is highly associated with natural and physical conditions and land use types of surrounding areas. The criteria were classified into two categories-NSPs runoff areas and potential NSPs runoff areas. 2. Land acquisition priority weights derived for NSPs runoff areas and potential NSPs runoff areas were 0.862 and 0.138, respectively. This implicates that much higher priority should be given to the land parcels with NSPs runoff areas. 3. Weights and priorities of sub-criteria suggested from this study include: proximity to the streams(0.460), land cover(0.189), soil permeability(0.117), topographical slope(0.096), proximity to the roads(0.058), land-use types(0.036), visibility to the streams(0.032), and the land price(0.012). This order of importance suggests, as one can expect, that it is better to purchase land parcels that are adjacent to the streams. 4. A standard scoring system including the criteria and weights for land acquisition priority was developed which would likely to allow expedited decision making and easy quantification for priority evaluation due to the utilization of measurable spatial data. Further studies focusing on both point and non-point pollutants and GIS-based spatial analysis and mapping of land acquisition priority are needed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.394-400
• /
• 2018

Recently, it is expected to significantly increase the defense budget by acquiring large-scale weapons systems to enhance defensive capabilities. In order to secure funds needed to acquire such weapons systems, it is necessary to improve the efficiency of the defense budget. In addition, interest in economic factors affecting the domestic economy such as export opportunities and employment creation are increasing, as well as budget reduction of the defense acquisition business. In order to respond to these demands, this study conducted cost- benefit analysis and examined economic ripple effects in the implementation of defense procurement projects. However, research on economic analysis methodology considering characteristics of defense acquisition projects is still in its early stage. This study proposes a methodology to analyze the economic feasibility of defense acquisition projects and conducted a case study on the economic feasibility of the ${\bigcirc}{\bigcirc}$ guided missile project which is being prepared against local provocation. The proposed economic analysis method provides the cost-effectiveness analysis that has been performed in many weapon system acquisition projects in connection with the more general cost-benefit analysis method. This study contributes to the establishment of an improved theoretical methodology for weapon system acquisition projects.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.146-149
• /
• 2005

Thesedays, the reduction of hand-transmitted vibration of hand-held power tools is important issue for operators' welfare, In the study, frequency response function is measured and vibration total value is evaluated for solving the principle and effect of the BOSCH's vibration-proof handle. This handle functions as a dynamic damper and has the effect, 22% vibration total value reduction under idling condition using a system that consists of a PC with data acquisition system and LabVIEW program. The program in the system makes it possible to evaluate vibration total value according to ISO 5349. This handle offers a good example for figuring out the physical contradiction between the work efficiency and operators' health.