• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.317-318
• /
• 2008

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.02a
• /
• pp.66-67
• /
• 2007

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.59-60
• /
• 2009

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.323-324
• /
• 2008

• ETRI Journal
• /
• v.28 no.6
• /
• pp.770-776
• /
• 2006

This paper presents a hyperspectral imaging technique based on laser-induced fluorescence for non-invasive detection of tumorous tissue on mouse skin. Hyperspectral imaging sensors collect image data in a number of narrow, adjacent spectral bands. Such high-resolution measurement of spectral information reveals contiguous emission spectra at each image pixel useful for the characterization of constituent materials. The hyperspectral image data used in this study are fluorescence images of mouse skin consisting of 21 spectral bands in the visible spectrum of the wavelengths ranging from 440 nm to 640 nm. Fluorescence signal is measured with the use of laser excitation at 337 nm. An acousto-optic tunable filter (AOTF) is used to capture images at 10 nm intervals. All spectral band images are spatially registered with the reference band image at 490 nm to obtain exact pixel correspondences by compensating the spatial offsets caused by the refraction differences in AOTF at different wavelengths during the image capture procedure. The unique fluorescence spectral signatures demonstrate a good separation to differentiate malignant tumors from normal tissues for rapid detection of skin cancers without biopsy.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.11
• /
• pp.1697-1702
• /
• 2004

In this paper, we proposed the design and calibration method for the near infrared Acousto-Optic Tunable Filter (AOTF). The theory and design principles of AOTF for the visible light are well known since I.C.Chang has developed the parallel tangent condition for the non-collinear AOTF. Deflection angle, frequency-wavelength relation, spectral resolution, etc. were calculated based on the theory of AOTF. From this result, important parameters - incident and acoustic angle - to fabricate AOTF were decided. We measured the spectral resolution and the relation between electrical driving frequency and the Optical wavelength of diffracted light to calibrate the near infrared AOTF. About 40 ∼ 80 MHz electrical frequency was required to get 1200 ∼ 2200 nm near infrared light. Spectral resolution was less than 10 nm in the near infrared region.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.152-153
• /
• 2001

파장 가변형 광 필터와 파장 선택형 광 스위치는 파장분할다중 광통신 및 광 교환 시스템을 구현하는데 매우 중요한 소자들 중의 하나이다. 특히 음향광학효과를 이용한 파장 가변형 광 필터(AOTF ： Acousto-Optic Tunable Filter)는 150nm 이상의 넓은 파장 가변범위, 1.5nm이하의 좁은 통과대역폭, 수 $\mu\textrm{s}$ 정도의 비교적 빠른 스위칭 속도 그리고 여러 개의 파장 채널을 동시에 선택할 수 있는 장점들을 가지고 있지만, 한편으로 표면 음향파(SAW： Surface Acoustic Wave) 구동에 필요한 RF 파워와 부 모드 (sidelobe)가 비교적 크다는 단점 때문에 실용화에 많은 제약을 받아왔다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.154-155
• /
• 2001

파장가변 광 필터는 WDM 광전송 시스템에 필요로 하는 핵심 부품중의 하나이다. 특히 LiNbO$_3$의 음향광학효과를 이용하는 AOTF(Acousto-Optic Tunable Filter)는 150nm 이상의 파장 가변 범위, 1.5nm 이하의 파장 통과대역폭, 수 $\mu\textrm{s}$ 정도의 비교적 빠른 스위칭 속도, 그리고 여러 파장 채널을 동시에 선택할 수 있는 장점들을 보유하고 있음에도 불구하고 표면 음향파(SAW： SurFace Acoustic Wave) 구동에 필요한 RF 파워와 부 모드(sidelobe)가 비교적 크다는 단점 때문에 실용화에 많은 제약을 받아왔다. (중략)

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.8
• /
• pp.637-645
• /
• 1998

The characteristics of waveguide, electrode and packaging fabricated for acousto-optic tunable filters(AOTF) used for optical communications were analyzed. A $Ti:LiNbO_3$in-diffusing method was employed for the formation of the optical waveguide with a dimension of width $8{\mu}m$, length $30000-50000{\mu}m$ and varying the thickness. The diffusion was carried at $1050^{\circ}C$ for 8 hours to pattern the optical waveguide. The resulted waveguide exhibited a single mode at 1550nm optical wavelength. The width of IDT, with 10 SAM periods, was $5000{\mu}m$ . Impedances of the electrodes deposited with Au were analyzed using a network analyzer; $48.1\Omega$ at the center frequency of 193MHz for electrode thickness of $1500{\AA}$ and $50.7\Omega$ at the center frequency of 192MHz for $1600\AA$. And the characteristics of packaged AOTF was analyzed. When the electrical frequency 177.1MHz was applied to the device, the mode conversion efficiency was measured as 63% at the optical wavelength 1515nm.

• Korean Journal of Optics and Photonics
• /
• v.11 no.6
• /
• pp.423-428
• /
• 2000

We have demonstrated a -8 dB additional reduction in the intensity sidelobe of an apodized-interaction-strength guide-wave acousto-optic filter with a center passband of 1551.6 nm. Acoustic-intensity weighting was achieved by launching a surface acoustic wave (SAW) beam in a straight acoustic waveguide, and gradually transferring this SAW intensity to the active device, and back out, by evanescent-wave coupling across a 50 !lm barrier over a 19 rom interaction length. The intensity sidelobe was -4.27 dB for an unapodized filter with abmpt onset and cutoff of the interaction, but sidelobes were reduced to at most -12.68 dB for a SAW intensity with raised-cosine weighting. The RF driving power was 17.78 mW. A linear tuning rate of 8.86 nmIMHz and a spectral width of -1.7 nm were demonstrated. rated.