• 한국소음진동공학회논문집
• /
• 제17권3호
• /
• pp.201-206
• /
• 2007

It is important to consider the sound absorption characteristics of building interior decoration materials when we design a building and simulate acoustics in a room. The purpose of this study is to accumulate acoustic data on building interior decoration materials and give a basic data for improving the sound absorption performance by testing the sound absorption coefficients of 9 types of ceiling materials, 14 types of wall papers and 20 types of floor papers.

• 한국음향학회지
• /
• 제19권2호
• /
• pp.73-82
• /
• 2000

I사 회의장은 실의 용도에 따른 실내음향특성에 대한 고려없이 설계, 시공되어 잔향시간이 길고 명료도가 매우 낮아 실내음향특성의 개선이 요구되어 왔다. 본 연구에서는 I사 회의장의 실내음향특성의 개선을 위해 실험 및 기하음향법을 이용한 시뮬레이션(simulation)을 수행하였다. 시뮬레이션을 수행함으로써 개선 안에 대한 음향파라미터 예측이 가능해졌고, 이로써 I사 회의장의 실내음향특성을 개선하기 위한 방안을 수립하였다. 그리고, 시뮬레이션의 결과에 대한 검증을 위해 시뮬레이션 값들을 실험치와 비교 평가하였다. 또한, 개선공사 후 실내음향 특성을 성공적으로 개선시킴으로써 본 논문에서 제안한 해석방법의 타당성이 입증 되었다.

• 한국가구학회지
• /
• 제10권1호
• /
• pp.57-63
• /
• 1999

This study was carried out to analyze the relationship between basic physical properties and acoustical characteristics of imported violin wood and to offer the information on raw material procurement and incoming-material quality control to domestic violin makers which have purchased most raw materials from European exporting countries at high expense. Equilibrium moisture content of European spruce with lower specific gravity after the prolonged storage was rather higher than that of European maple with higher specific gravity. The specific gravity of spruce increased with decreasing annual ring width, however, that of narrower annual ring. Increasement in specific gravity enhanced the dynamic Young's modulus of both wood species, but influenced the vibration energy loss by internal friction differently between two species. For dynamic MOE, qurater-sawn spruce was higher than the flat-sawn, but maple showed the reverse directional characteristics. Consequently, it would be well for violin makers to establish the standard for materials and quality control system to assure the quality of their violin products.

• 한국소음진동공학회논문집
• /
• 제27권1호
• /
• pp.36-42
• /
• 2017

Helical gear excitation is transmitted to a gearbox through the shafts and bearings and the vibration of the gearbox radiates the noise in the air. Therefore gearbox modeling is essential to evaluate the gear noise. This work deals with vibration and acoustic analysis of a cylindrical shell-type gearbox with/without holes excited by helical gears and focuses on the development of the simple gearbox model. To do so, helical gears and bearing forces are calculated. Gearbox with/without holes is modeled by the aluminum end plates and PMMA cylindrical shell body. The vibration mode and the forced harmonic response were calculated by the commercial FE software and the end plate of the gearbox is more contributed to vibration than the body. Acoustic analysis was also conducted by the commercial acoustic software and a cylindrical shell type gearbox with/without holes has the similar vibro-acoustic characteristics.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.65-71
• /
• 2001

Absorbers such as porous materials and panels have limited absorption characteristics to some frequency bands. There is a need for absorbers with high absorption coefficients in a wide frequency ranges to make good response of room acoustics. This is almost impossible for a single absorption material. Composite absorption structure with cover, porous material. and air gap is known to have those wide frequency characteristics. In this basis. various composite absorption structures are measured and investigated as wide range absorption structures. Measurements are performed according to an international standard, ISO 354. Various surface types such as wooden slits, wood/steel perforated panels are selected as surface covers, and also various porous materials such as polyurethanes, polyesters, and glasswools are used inside the covers. Result shows that the area of void parts of surface materials is critical to high frequency absorptions, and thickness of air gaps are critical factor of the peak absorptions of low frequency bands.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.183-188
• /
• 2003

This study is to make the fundamentals of sound quality evaluation in regard of acoustical characteristics of passenger compartment. The deviation of frequency response function level within audible frequency is evaluated at receiving point in the research of room acoustics. In this study, frequency response function is the one between speaker and driver's ear positions. The positions of driver and audio speakers are optimized by analysis of acoustic mode of acoustic cavity. The main reflection planes are determined by analysis sound ray path diffused at optimized speaker positions. Finally, designer selects acoustical material by analysis of absorption effect of acoustical materials on the main reflection planes in order to avoid to distortion and fluctuation of frequency response function..

• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1096-1103
• /
• 1990

본 연구에서는 Fig.1과 같은 열린 경제(open boundary)를 갖는 일반적인 형태 의 3차원 풍동에 대한 공진 특성을 구하여 이를 실험과 비교한다.이런 풍동에 공진 진동수와 일치하는 규칙적인 가진을 주면, 유동 특성은 현저하게 변하게 된다. 일반 적으로, 이러한 임의의 형태를 갖는 풍동의 공진 진동수와 모드는 이론적인 방법으로 예측하기는 매우 힘들다. 이런 경우에 유한요소법은 매우 유용한 방법이다.

• 한국전산구조공학회논문집
• /
• 제22권1호
• /
• pp.89-103
• /
• 2009

이 연구에서는 얇은 판형구조물의 손상탐지에 널리 사용되어오는 램파에 시간반전(time reversal)개념의 적용성을 이론적으로 규명한다. 고전적 시간반전 음향학에 의하면, 센서에서의 출력신호를 시간영역에서 반전 후 재입사시켜 원래의 가진점으로 돌려보내면, 그 가진점에서 원래 입력신호가 복원된다. 그러나 램파에 시간반전과정을 적용하게 되면 램파 고유의 분산성과 판 경계에서의 파 반사로 인해 시간반전성이 복잡한 양상을 띠게 된다. 이러한 램파의 시간반전성을 보다 잘 이해하기 위해 이 연구에서는 램파의 시간반전과정을 이론적으로 규명한다. 특히, 램파의 내부모드분산, 다중모드분산, 그리고 판 경계면에서의 램파의 반사가 시간반전성에 미치는 영향을 정식화하였다 간단한 수치예제를 통해 이 연구에서 제시된 이론적 발견들의 타당성을 검증한다.

• 센서학회지
• /
• 제10권5호
• /
• pp.320-328
• /
• 2001

PVDF(Polyvinylidene fluoride) 압전막을 이용하여 $8{\times}8$의 요소를 갖는 2차원 배열 수중청음기를 설계 제작하고. 그것을 이용하여 수 MHz$\sim$수십 MHz 대역의 초음파 음장을 측정하는 방법 및 측정시스템을 구축하였다 수중청음기의 설계에 있어서는 배면체의 종류에 따른 주파수 응답특성을 Mason 등가회로에 의해 해석하였고, 압전체 요소의 크기 및 간격, 스캐닝 스탭에 따른 음장 측정 정도를 검토하였다 2.25MHz의 원형평면 트랜스듀서가 만드는 수중 음장을 제작한 수중청음기 및 측정시스템으로 측정한 결과, 비교적 정밀한 측정이 가능함을 알았다.

• 한국분무공학회지
• /
• 제10권3호
• /
• pp.29-37
• /
• 2005

The spray and acoustic characteristics of a gas/liquid swirl coaxial injector are studied experimentally. The self-pulsation is defined as a pressure and flow rate oscillations by a time-delayed feedback between liquid and gas phase. Self-pulsation has strong influences on atomization and mixing processes and accompanies painful screams. So. the spray and acoustic characteristics are investigated. Spray patterns are observed by shadow photography technique in order to determine the onset of self-pulsation. And self-pulsation boundary with Injection conditions and recess length is get. To measure the frequency of the spray oscillation. oscillation of the laser intensity which passes through spray is analyzed by Fast Fourier Transform. For acoustic tests, a PULSE System was used. Acoustic characteristics of a swirl coaxial injector are investigated according to the injection conditions. such as the pressure drop or the liquid and gas phase. and injector geometries. such as recess length and gap size between the inner and outer injector. Front the experimental results. the increase of recess length leads to the rapid increase of the sound pressure level. And as the pressure drop of the liquid phase increases. the frequency of the self?pulsation shifts to the higher frequency. The frequency of spray oscillations is the same as that of the acoustic fields by self-pulsation.