• Journal of the Society of Naval Architects of Korea
• /
• v.56 no.5
• /
• pp.464-471
• /
• 2019

The acoustic power is a major acoustical characteristic of an underwater vehicle and could be measured in a reverberant water tank. In order to obtain accurate measurement results, the acoustic field formed by the sound source should be investigated quantitatively in the reverberant water tank. In this research, the acoustic field of a reverberant water tank containing an underwater sound source has been analyzed by using an acoustic radiosity method one of the numerical analysis methods suitable for the acoustic analysis of the highly diffused space. The source level of the underwater sound source and acoustical properties of the water tank input to the numerical analysis have been estimated by applying the reverberant tank plot method through a preliminary experiment result. The comparison of the numerical analysis result with that of the experiment has verified the accuracy of the acoustic radiosity method.

• The Journal of the Acoustical Society of Korea
• /
• v.2 no.1
• /
• pp.11-19
• /
• 1983

An irregulary formed chamber was designed and constructed to recognize the direct sound radiated from the sound source and the reflected sound from the walls of the chamber. The sound signal used was tone burst in the frequency response characteristics with the signal detection after transient effect. The direct wave, transient phenomena and the primary reflected sound could be asiily distinguished each other by measurements of the arrival time of the time difference. And also noise could be easily distinguished by the same method. The result obtained can be used in industries for automatic measurement of the sound pressure reponse characteristics with respect to frequencies.

• The Journal of the Acoustical Society of Korea
• /
• v.5 no.2
• /
• pp.39-47
• /
• 1986

흡음 계수는 흡음재의 흡음 특성을 제시해 주는 기본적 물리량이다. 본 연구에서는 일반적으로 흡음재로 사용되는 흡음재의 흡음 특성을 알기 위해 두께 18mm, 직경 105mm인 10종의 흡음재를 택하 여 흡음재의 흡음 계수를 구하였다. 이를 위해 impedance tube를 제작하여 관내에 흡음재를 넣은 후 관 내에 만들어진 정상파의 최대 음압과 최소음압의 비, 정상파비를 이용하여 흡음 계수를 구했다. 그 결과 흡음재의 흡음 특성은 진동수, 흡음재으 lwowlf, 두께 및 다공성에 크게 의존해 스폰지, 유리 섬유 등의 흡음 효과가 좋게 나타났으며 특히 같은 두께의 동일 흡음재일지라도 흡음재 뒷면의 공기층을 적절리 조절함으로써 특정 진동수 근처에서의 흡음 효과를 증대시킬 수 있었다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.365-368
• /
• 2002

수중에서와 같이 전자기파의 사용이 곤란한 환경에서 정보의 전달 방법으로 초음파를 사용하는 것이 일반적이다. 그러나 기존의 방법은 음파의 전파 경로 상에 있어서 잡음, 온도, 음속 등의 환경에 많은 영향을 받기 때문에 정확한 정보의 전달이 곤란한 경우가 있다. 본 연구에서는 전기적 용량으로 특성을 제어할 수 있는 2층 구조 압전 트랜스듀서에 있어서 전기적 용량 변화에 따른 공진 모드간의 효율 비의 변화를 이용하여 전파 경로 상의 환경 변화에 독립적인 원격 물리 계측법을 제안하고 그 가능성을 확인하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.221-224
• /
• 2002

VoIP 음성 통신 시스템에서 통화를 할 때, 네트워크 상황이 나빠짐에 따라 시간 지연, 패킷 손실, 지터 등의 QoS 파라미터에 의한 영향이 발생하므로 통화 품질이 떨어지게 된다 통화 품질을 개선하기 위해서는 통화 품질과 QoS 파라미터와의 관계를 명확히 파악하고 그에 대한 개선 방법을 연구해야 한다. 따라서 본 논문에서는 통화 품질과 QoS 파라미터와의 상관관계를 회귀 분석을 통해 도출해 내었다. 제시된 음질 평가 기준은 QoS 파라미터만을 가지고 음질을 예측하기 때문에 계산량이 매우 적으며, 음질 평가 수행 중에 음성 통신 시스템에 거의 영향을 미치지 않는다는 장점을 가지고 있다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.337-340
• /
• 2000

입체음향 생성을 위한 기존의 방법은 크게 바이노럴 녹음기법과 머리전달함수(HRTF)를 이용한 바이노럴 합성 기법으로 나눌 수 있다. 기존 2채널 더미헤드를 이용한 바이노럴 녹음기법과 바이노럴 합성기법은 표준 더미헤드를 사용함으로써 청취자 머리와의 오차로 정면 음상 정위의 어려움, "Front-back confusion", 이동 음 음상 정위 어려움 등의 문제로 실제 녹음 현장에서는 거의 사용되지 않고 있다. 본 논문에서 제안한 3채널 더미헤드 기법은 이러한 문제점을 극복할 수 있고, 특히, HRTF 합성 시 기존의 HRTF의 문제점을 극복할 수 있는 새로운 HRTF를 구축할 수 있다. 따라서 바이노럴 합성 기법이 필요한 오락, 시뮬레이터, 음장 가청화 기술(Auralization) 프로그램 등 다양한 분야에서의 적용이 가능하다.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.2E
• /
• pp.18-23
• /
• 1999

This paper proposes a method of separately determining three intrinsic mechanical parameters of an unknown object in the framework of ultrasound inverse scattering tomography. Those parameters are the speed of sound, density, and absorption whose values are given as the solution of an inhomogeneous Helmholtz wave equation. The separate reconstruction method is mathematically formulated, the integral equations are discretized using the sinc basis functions, and the Newton-Raphson method is adopted as a numerical solver in a measurement configuration where the object is insonified by an incident plane wave over 360˚ and the scattered field is measured by detectors arranged in a rectangular fashion around it. Two distinct frequencies are used to separate each parameter of three Gaussian objects that are either located at the same position or separately from each other. Computer simulation results show that the separate reconstruction method is able to separately reconstruct the three mechanical parameters. The absorption parameter turns out to be a little difficult to reconstruct as compared with the other two parameters.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.3E
• /
• pp.3-11
• /
• 2000

A structural modification technique for reducing structure-borne noise of vehicles using a sensitivity analysis is suggested. To estimate the noises generated by the vibration response, a semi structure-acoustic coupling analysis was exploited. As a result of the coupling analysis, severe noise generating positions are identified whose vibrations should be cured through structural modifications. Formulation for the sensitivity analysis of those severe vibration responses with respect to the design changes is derived to enhance the vibration response. Special attention is given in this paper to the use of the experimentally measured vibration responses in the sensitivity analysis. As a result of the proposed method, the structural modifications can be peformed accurately by using experimental data instead of using the finite element method though the higher vibration modes are considered as long as the vibration measurement and acoustic mode calculations are accurate. Effectiveness of this method was examined using an example model by experiments.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.770-774
• /
• 1994

The volume of an acoustic source is important in determining various acoustic parameters. One of the suggested techniques is the internal pressure method incorporating a loudspeaker attached to a chamber wall and a microphone inserted into the cavity. Although the method is easy to handle with a very simple measurement setup, the coupling effects between the dynamic system of the loudspeaker and acoustic field, and the effects of higher order modes introduced by the discontinuities in the acoustic field, and the effects of higher order modes introduced by the discontinuities in the acoustic field should be considered for precise result. In this study, higher order modes due to the discontinuities of loudspeaker and microphone boundaries are included and the electro-acoustic coupling effects are compensated for by using the results of two cylinders with different lengths. The volume velocity of a loudspeaker thus obtained agrees very with that measured by laser sensor.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.1
• /
• pp.73-83
• /
• 2021

Wind power energy harvesting has a big potential as a future clean energy resource, but accompanies infrasonic noises. The infrasound is difficult to shield and can induce various negative physiological effects. In this study, the Wind Turbine Syndrome (WTS) caused by the infrasonic noises are introduced, and the technical aspects for the measurement and management of the infrasonic noises from wind power plants are discussed.