• 한국음향학회지
• /
• 제41권3호
• /
• pp.335-341
• /
• 2022

본 논문에서는 기존 자연어 처리 분야에서 뛰어난 성능을 보이는 트랜스포머를 하이브리드 음성인식에서의 음향모델로 사용하였다. 트랜스포머 음향모델은 attention 구조를 사용하여 시계열 데이터를 처리하며 연산량이 낮으면서 높은 성능을 보인다. 본 논문은 이러한 트랜스포머 AM에 기존 DNN-HMM 모델에서 사용하는 가중 유한 상태 전이기(weighted Finite-State Transducer, wFST) 기반 학습인 시퀀스 분류 학습의 네 가지 알고리즘을 각각 적용하여 성능을 높이는 방법을 제안한다. 또한 기존 Cross Entropy(CE)를 사용한 학습방식과 비교하여 5 %의 상대적 word error rate(WER) 감소율을 보였다.

• 한국정밀공학회지
• /
• 제11권2호
• /
• pp.32-40
• /
• 1994

In this study by using EMAT(electro magnetic acoustic transducer)the artificial slit is installed on 12B-SUS pipe test piece. By making 4 cycle SH-burst (EMA) incidence to 45 .deg. angle, the signal data of pulse, received from EMAT are translated into digital-signal-processing- method SSP(Split Spectrum Processing) and Deconvolution method. The main conclusions obtained are as follows; (1) the signal data received from EMAT are translated with digital signal proc- essing of SSP-method and Deconvolution-method and this method shows exellent results more than Ultrasonic testing method does; (2) noise can well be removed by SSP with signal data, and resolution and S/N ratio are advanced; (3) when used with Ultrasonic wave general stainless steel has proporties of multiscattering and reflection phenomena, but resolution is progressed by using Deconvolution method;and (4) as addition-averaging-processing mumber is increasing, the resolution and S/N ratio are improved and the satisfactory signal is obtained.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1199-1201
• /
• 1995

PZT powders were prepared by the molten salt synthesis method. The porous PZT was preapred from the mixture of PZT and PVA powders by BURPS(BURnout plastic Sphere) technique. The acoustic properties with various plastic sphere wt.% were studied. The acoustic impedance of porous PZT was smaller than that of single phase PZT ceramics. And the pulse-reponse of porous PZT maded transducer was significantly advanced to that of solid PZT maded transducer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.168-171
• /
• 2000

Underwater acoustic communications have made considerable advances in the past decade. The purpose of this paper is to achieve the underwater communication by ultrasonic sensors and to investigate conditions of good underwater acoustic communicators. As a result of this experiments, the ultrasonic sensors, MA40E7R/S, made by Nicera can be used as ultrasonic transducers for underwater communication using AM(Amplitude Modulation) signal and Transmission Loss is 17.328[dB] at 65[cm]. To make a good underwater communicator, proper diameter of disk PZT transduers is the one of most important factors, because radiation of acoustic wave depends on proper diameter of transduers and the transmission loss strongly depends on the spreading loss.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.385-388
• /
• 2001

The cutting performance of a machine depends on the ability of the design of the acoustic horn to facilitate an increase in tool-tip vibration, allowing a significant amount of material to be removed. In this paper, three kinds of acoustic horns were designed and FEM was used to estimate displacement magnifications of horn tips. An optimization procedure for the profile has been followed to obtain maximum magnification, for higher rate of material removal and safe working stresses for the horn material.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.303-306
• /
• 1999

In this study, the piezoelectric ceramics PZT powder was synthesized by Wet-Dry combination method. The flexible 1-3-0 type composites were fabricated with piezoceramic PZT and Eccogel polymer matrix embedded 3rd phase. This paper represents the acoustic properties with various 3rd phase wt.%. The acoustic impedance of 1-3-0 type composites was lower than that of single phase PZT ceramics. The pulse-echo response of transducer fabricated with 1-3-0 type composites was better than solid PZT transducer.

• 비파괴검사학회지
• /
• 제29권6호
• /
• pp.519-524
• /
• 2009

This work presents a simple technique to determine the Poisson's ratio of homogeneous solid material using a pair of low cost PVDF ultrasonic transducers. It is based on transducer's property of generating longitudinal and transversal waves depending on the excitation frequency. Mechanical tests were conducted to validate the proposed method, resulting in a good agreement between ultrasonic and mechanical techniques.

• 한국음향학회지
• /
• 제11권6호
• /
• pp.32-40
• /
• 1992

This study shows how the finite element method for the structural problems could be applied in the electromechanical impedance analysis of an in-air piezoelectric cylinder transducer and then compares the numerical results by the FEM with the measured results using the impedance analyzer. The results also show that the comparison between both results could be applied to examine the mechanical properties of the added unknown material to transducer such as an acoustic window.

• The Journal of the Acoustical Society of Korea
• /
• 제26권1E호
• /
• pp.14-20
• /
• 2007

The characteristics of a PZT transducer with a cylindrical rear surface were investigated theoretically and experimentally. The transducer was assumed as a set of finite rectangular ceramic elements for applying the staircase model to the theoretical analysis and the KLM equivalent circuit model was modified for analyzing its electric impedance and pulse-echo response. All results were compared with those of a conventional plane transducer which has a constant thickness of average value for the cylindrical arc. It was noted that the transducer with a cylindrical rear surface has several subsidiary resonant frequencies which are able to widen bandwidth.

• 비파괴검사학회지
• /
• 제24권5호
• /
• pp.518-524
• /
• 2004

V(z)곡선법을 이용한 코발트기 초내열합금강의 열화도 평가 유용성 유무를 고주파 초음파 탐촉자를 이용하여 실험적으로 검증하였다. 코발트기 초내열 합금이 고온에서 장시간 노출되었을 때 일어나는 미세조직의 변화를 모사하기 위해서 인공열화를 실시하였다. 여로하에 미치는 초음파 음속의 영향을 고찰하고자 10 MHz를 이용하여 펄스-에코법으로 종파의 음속을 측정하고 200 MHz를 사용하여 V(z)곡선법으로 누설탄성표면파의 음속을 측정하였다. 두 초음파의 음속은 열화시간에 따라서 감소하였다 더욱이, 저주파수 종파의 음속변화는 거의 없었지만, 고주파수 누설탄성표면파의 음속변화는 열화시간에 따라서 최대 4.7%의 변화를 나타내었다. 열화에 따른 경도의 변화와 누설탄성표면파의 음속 변화는 양호한 상관관계를 나타내었다. 따라서 열화도 평가에 고주파 탐촉자를 이용한 초음파 현미경의 V(z)곡선법이 유용함을 알 수 있었다.