• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제15권3호
• /
• pp.159-165
• /
• 2015

The need for the recognition of music emotion has become apparent in many music information retrieval applications. In addition to the large pool of techniques that have already been developed in machine learning and data mining, various emerging applications have led to a wealth of newly proposed techniques. In the music information retrieval community, many studies and applications have concentrated on tag-based music recommendation. The limitation of music emotion tags is the ambiguity caused by a single music tag covering too many subcategories. To overcome this, multiple tags can be used simultaneously to specify music clips more precisely. In this paper, we propose a novel technique to rank the proper tag combinations based on the acoustic similarity of music clips.

• 대한전자공학회논문지SD
• /
• 제45권4호
• /
• pp.64-71
• /
• 2008

SAW(Surface Acoustic Waves)를 기반으로 passive RFID(Radio Frequency IDentification) tag 및 송수신 시스템을 제작하였다. Pulse position encoding 방식의 SAW ID 태그(tag)를 제작하여 amplitude on/off 방식의 SAW ID 태그에 비해 3배의 데이터 용량 증대 효과를 얻을 수 있었다. 또한, 수신 시스템을 heterodyne 방식과 direct conversion 방식으로 제작하였다. 측정 결과 direct conversion 방식으로 제작된 수신 시스템이 heterodyne 방식의 수신 시스템과 비교하여 isolation 특성이 10 dB 증가하였으며, 그 결과 무선 도달 거리가 증가했다.

• Journal of electromagnetic engineering and science
• /
• 제7권1호
• /
• pp.12-16
• /
• 2007

A UHF band wireless identification system based on passive surface acoustic wave(SAW) devices is presented in this paper. SAW ID tags were fabricated on Y-Z $LiNbO_3$ piezoelectric substrate with a good electro-mechanical coupling property. To reduce degradation of the antenna performance associated with the piezoelectric materials, an efficient design of the SAW RFID antenna is introduced. By measuring the parameters of the SAW ID tag, the performance of the antenna was tested by experimentation.

• 전기학회논문지
• /
• 제56권8호
• /
• pp.1430-1435
• /
• 2007

We developed a 440MHz surface acoustic wave (SAW) microsensor integrated with pressure-temperature sensors and ID tag. Two piezoelectric substrates were bonded, in which ${\sim}150\;{\mu}m$ cavity was structured. Four sides were completely sealed by JSR photoresist (PR). Pressure sensor was placed on the top substrate, whereas ill tag and temperature sensor were placed on the bottom substrate. Using network analyzer, the developed microsensor was wirelessly tested. Sharp reflection peaks with high S/N ratio, small signal attenuation, and small spurious peaks were observed. All the reflection peaks were well matched with the coupling of mode (COM) simulation results. With a 10mW RF power from the network analyzer, a ${\sim}1$ meter readout distance was observed. Eight sharp ON reflection peaks were observed for ID tag. Temperature sensor was characterized from $20^{\circ}C$ to $200^{\circ}C$. A large phase shift per unit temperature change was observed. The evaluated sensitivity was ${\sim}10^{\circ}/^{\circ}C$.

• 한국정보통신학회논문지
• /
• 제13권10호
• /
• pp.2088-2096
• /
• 2009

본 논문은 수중음향통신망을 위한 TDMA(Time Division Multiple Access) 기반의 비경쟁모드 방식의 MAC 프로토콜과 경쟁모드 방식의 MAC 프로토콜을 동시에 사용하는 하이브리드 MAC 프로토콜을 제안하고 있다. 제안된 MAC 프로토콜은 네트워크 전반적인 관리를 위한 비콘 패킷, 시간슬롯 사이의 충돌방지를 위한 Guard Period, 시간 태그(time tag)를 이용한 마스터 노드와의 전송지연 계산, 노드간 시간동기, 네트워크 진입 및 탈퇴, 노드간 통신방식 등의 기능을 제공한다. 수중음향통신망의 대표적 이동노드인 자율무인잠수정(AUV)을 대상으로 제안된 하이브리드 MAC프로토콜을 적용하였고, 제안된 MAC 프로토콜이 실제 수중음향통신망 환경에서 적용 가능함을 검증하였다.

• 수산해양기술연구
• /
• 제25권2호
• /
• pp.54-60
• /
• 1989

한국연안어장에서 어군의 행동특성을 정확하게 파악할 수 있는 기초재료를 제공하고져 초음파표식을 제작하여 그 표식의 성능과 축양조내에서와 정치망어장내에서의 단체어(공식어:방어)의 행동특성을 분석, 검토한 결과, 제작한 40KHz 초음파표식과 VEMCO사의 50KHz 초음파표식은 무지향특성으로 각각 200m, 500m거리에서 추적이 가능하였다. 축양조내에서는 방류초기에는 불규칙적인 행동을 하였으나 시간이 경과함에 따라 안정된 속도로 행동함으로서 정치망내에서의 행동특성을 관측하는데 유용할 것으로 기대된다. 정치망어장에서 방류하여 추적한 결과, 어장내에서의 이동경로, 유영속도 등을 정확하게 측정할 수 있어 어군의 어도를 정확하게 파악할 수 있음을 확인할 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제18권8호
• /
• pp.690-695
• /
• 2005

We have investigated on the development of 2-2 mode piezocomposites that have better piezoelectric activity and lower acoustic impedance than those of conventional piezoceramics. In this study, we have investigated the electrical properties and acoustic impedance of 2-2 mode piezocomposite which were fabricated using the dice-and-fill technique for the different volume fractions of PZT The volume shrinkage of polymer is an important factor in 2-2 mode piezocomposites fabrication. The thickness mode electromechanical coupling factor($\kappa_t$) of PZT was compared with that of piezocomposites. It was shown that the 2-2 mode piezocomposites were much better than the PZT only. The acoustic impedance of 2-2 mode piezocomposites decreased linearly when PZT volume fraction was decreased.

• 수산해양기술연구
• /
• 제46권3호
• /
• pp.232-238
• /
• 2010

The moving ranges and behavior of four wild abalones, Haliotis discus hannai, were measured by an acoustic telemetry technique. The shape of the sea bottom of the experimental area was surveyed by a bathymetry system and three self-recording type acoustic receivers were used for monitoring the behavior and measuring the movement range. The abalones (WA1-WA4) attached acoustic tags were released and measured the movement during ten months. Three abalones (WA1, WA3 and WA4) were successively detected around the released point during the experiment and were moved to the V2 area where water depth is deeper than the V1 area. The change of inhabitation depth was also detected from the depth sensor of WA4. As the result, abalones were moved to deeper water area accordance with the decrease of the water temperature. The moved ranges of abalones were approximately 200 - 400m from the release point.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.95-96
• /
• 2011

본 논문은 표면탄성파(Surface Acoustic Wave)의 특성을 이용하여 반사되어 돌아오는 피크 신호를 통해 개체를 식별하며 온도 변화에 따른 위상의 변화를 갖는 ID 태그 및 온도 센서의 제작공정과 네트워크 분석기를 이용한 측정에 대해 소개한다. 표면탄성파 마이크로센서는 IDT(interdigital trancducer)와 ID 번호를 갖는 리플렉터, 온도 변화에 따른 위상 변위를 관찰하기 위한 리플렉터로 구성된다. 제작된 두 개의 소자는 49(0110001), 113(1110001)의 ID 번호를 가지고 있으며, 1 us에서 기준신호를 관찰할 수 있도록 한 개의 리플렉터를 추가적으로 포함한다. 또한 온도 변화에 따른 전파 속도의 변화로 인해 발생 하는 위상 변화를 관찰하기 위한 리플렉터를 포함한다. $41^{\circ}$YX $LiNbO_3$ 압전기판, AZ1512 감광제, 알루미늄을 이용하여 제작 되었고 네트워크 분석기를 통해 출력된 신호로 ID 번호를 식별하고 $30^{\circ}C$에서 $120^{\circ}C$까지의 온도 변화에 따른 위상 변화를 측정하였다.

• Journal of Computing Science and Engineering
• /
• 제6권1호
• /
• pp.40-50
• /
• 2012

Increase in the number of older people due to demographic changes poses great challenges to the social healthcare systems both in the Western and as well as in the Eastern countries. Support for older people by formal care givers leads to enormous temporal and personal efforts. Therefore, one of the most important goals is to increase the efficiency and effectiveness of today's care. This can be achieved by the use of assistive technologies. These technologies are able to increase the safety of patients or to reduce the time needed for tasks that do not relate to direct interaction between the care giver and the patient. Motivated by this goal, this contribution focuses on applications of acoustic technologies to support users and care givers in ambient assisted living (AAL) scenarios. Acoustic sensors are small, unobtrusive and can be added to already existing care or living environments easily. The information gathered by the acoustic sensors can be analyzed to calculate the position of the user by localization and the context by detection and classification of acoustic events in the captured acoustic signal. By doing this, possibly dangerous situations like falls, screams or an increased amount of coughs can be detected and appropriate actions can be initialized by an intelligent autonomous system for the acoustic monitoring of older persons. The proposed system is able to reduce the false alarm rate compared to other existing and commercially available approaches that basically rely only on the acoustic level. This is due to the fact that it explicitly distinguishes between the various acoustic events and provides information on the type of emergency that has taken place. Furthermore, the position of the acoustic event can be determined as contextual information by the system that uses only the acoustic signal. By this, the position of the user is known even if she or he does not wear a localization device such as a radio-frequency identification (RFID) tag.