• Journal of Ocean Engineering and Technology
• /
• v.33 no.5
• /
• pp.421-426
• /
• 2019

The directivity of an underwater sound source should be measured in an acoustically open field such as a calm sea or lake, or an anechoic water tank facility. However, technical difficulties arise when practically implementing this in open fields. Signal processing-based techniques such as a sound intensity method and near-field acoustic holography have been adopted to overcome the problem, but these are inefficient in terms of acquisition and maintenance costs. This study established a simple directivity estimation technique with data acquisition, filtering, and analysis tools. A numerical simulation based on an acoustic radiosity method showed that the technique is practicable for sound source directivity estimation in a diffused reverberant acoustic field like a reverberant water tank.

• The Journal of the Acoustical Society of Korea
• /
• v.3 no.1
• /
• pp.3-8
• /
• 1984

By one dimensional acoustic transmission from ground to air, the author has derived the level of sound caused by earthquakes. He has also tried to assign proper values of ground acceleration to the modified mercalli intensity scale and thence earthquake sound level to the intensity scale has been deduced as L\sub M/ = 79.6+6.0M, dB, where M is the earthquake magnitude in the modified Mercalli intensity scale.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.224-227
• /
• 2007

This paper introduces the results of acoustic loads test conducted on the upper stage assembly of KSLV-I, which is the first Korea space launch vehicle. A launch vehicle and its payloads are subjected to severe acoustic pressure loading when they lift off and ascent during the transonic periods. Acoustic loadings are spreaded out broad frequncy-spectrum up to 10,000Hz. Acoustic loads are a primary source of structural random vibration of the upper stage and payloads. Therefore, in order to verify the structural integrity of the upper stage assembly of KSLV-I and the survivability of its components under severe random vibration environment, acoustic loads test is conducted in the high intensity acoustic chamber with 142dB (overall SPL). The results show the structural design and component random vibration specifications well meet with the environmental requirements.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.12
• /
• pp.622-626
• /
• 2001

HID(high intensity discharge)lamps are high pressure mercury lamp, high pressure sodium lamp and metalhalide lamp. metalhalide lamp among these lamps has considered to be one of the most effective artificial light sources and this lamp has good efficiency, good color rendition and good focusing capability, But the shortcorning of metalhalide lamp is known as acoustic resonance phenomena in the discharge tube when lighted by electronic ballast and then acoustic resonance cause various problems such as the arc instability, light output fluctuations. In this paper, to reduce the acoustic resonence phenomena, the electronic ballast was designed by three methods for high frequency operation wish frequency-modulated sinusodial waves in acoustic resonance frequency band. These frequency-modulated methods are resonance frequency and resonance frequency, resonance frequency and non-resonance frequency non-resonance frequency and non-resonance frequency Experiment results could't show the Presence of acoustic resonance visually and it proved that the resonance-generating conditions can be avoided by continuously changing the two operating frequencies in acoustic resonance band (20.59kHz∼94.2kHz).

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.881-885
• /
• 2002

This paper presents the performance and the algorithm of a 1/3-octave band spectrum control system. The system is developed to provide various spectrums in a high intensity acoustic chamber. The required spectrum, which usually comes from launch vehicle company, starts from 25Hz band and ends 10kHz band. Automatic spectrum control system is preferred since the system requires short settling time to guarantee the safety of test objects and to reduce the amount of operating gas. The developed system adapted a PCI data-acquisition/signal-generation board installed in a personal computer to implement whole control logic. The control software used three cascade digital Butterworth filters using software. The filers are designed following ANSI S1.11 standard to implement 1/3 octave band filter bank. The graphical user interface of the system guides the user to follow standard operation procedure. The averaged control spectrum showed less than 0.05 dB in every running 1/3-octave band.

• Journal of Environmental Science International
• /
• v.18 no.11
• /
• pp.1299-1307
• /
• 2009

In order to measure in-situ suspended particle size, volume concentration of suspended particulate matter and current speed, mooring observation was performed at the Gwangyang Bay by using of an optical instrument, 'LISST-100' and an acoustic instrument, 'ADV'(St. S1). And the sediment flux was obtained based on the concentration of suspended particulate matter and current speeds measured at three lines of Gwangyang Bay during ebb and flood tide of August 2006. To investigate the spatial variation of suspended particulate matter, profiling observations were measured difference echo intensity and beam attenuation coefficient by using of ADCP and Transmissometer (Line A, B, C). The suspended sediment flux rate at the mouth of Gwangyang Bay was observed to be higher during asymmetrical than symmetrical of current speeds. The flux of suspended particulate matter concentration and current speeds were transported to southeastern direction of surface layer and northwestern direction of bottom layer at the western area at line A of Gwangyang Bay. Small suspended particles have been found to increase attenuation and transmission more efficiently than similar large particles using acoustic intensity (ADV/ADCP) or optical transmit coefficient (LISST-100/Transmissometer). The application and problems as using optical or acoustic instruments will be detected for use in time varying calibrations to account for non-negligible changes in complex environments in situ particle dynamics are poorly understood.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.911-916
• /
• 2001

Structural acoustic modification method based on the structural mobility analysis is applied to reduce the structure-borne noise radiated from hard disk drive system. Sound intensity techniques and ODS(Operational Deflection Shape) techniques are also used in order to provide the structural acoustic information for the mobility modification. The sound intensity is for the acoustic visualization of the noise source locations, and the ODS is for the visualization of the vibration pattern and its dynamic characteristics of the noise sources. Using visualization information of sound and vibration, local structural input mobility is reduced in the frequency band of interest by designing asymmetrical wave-stringer structure in the wave-number domain as well as frequency domain. The overall sound pressure level is reduced by 4dB and its controlled sound power radiated from the disk drive is proved to under 2.8Bel in idle-spinning mode and 3.1 Bel in random-seeking mode, which are the lowest noise levels in the hard disk drive industry.

• Speech Sciences
• /
• v.14 no.3
• /
• pp.93-109
• /
• 2007

It is reported that the orthognathic patients suffer from not only aesthetic problems but also resonance disorder and articulation disorder because of the abnormality of the oral cavity. This study was designed to investigate the resonance of nasality and the intelligibility of speech for acoustic characteristics of patients' speech before and after orthognatic surgery. 8 orthognathic patients participated in the study. The nasality of words containing Korean consonants, Korean consonants and frequency and intensity of the fricative /s/ were measured using Nasometer and CSL (Computerized Speech Lab). Results were as follows: First, the nasality of post orthognathic surgery patients decreased in spontaneous speech. There was a significant difference in the nasality for all words between pre and post orthognatic surgery patients. Second, the nasality of each Korean consonant phoneme of post orthognathic surgery patients decreased. There was also a significant difference of the nasality for each Korean consonant phoneme between pre and post orthognatic surgery patients. Third, the decreased nasality for Korean consonant phonemes showed in plosives, affricates, fricatives, liquids, and nasals after surgery. But the significant difference showed only in plosives and fricatives. Finally, frequency and intensity for the fricative /s/ of post orthognathic patients increased.

• Phonetics and Speech Sciences
• /
• v.15 no.3
• /
• pp.1-7
• /
• 2023

This study investigates how the phonological and phonetic information of vowels influences prosodic prominence among linguistically untrained listeners using public speech in American English. We first examined the speech material's phonetic realization of vowels (i.e., maximum F0, F0 range, phone rate [as a measure of duration considering the speech rate of the utterance], and mean intensity). Results showed that the high vowels /i/ and /u/ likely had the highest max F0, while the low vowels /æ/ and /ɑ/ tended to have the highest mean intensity. Both high and low vowels had similarly high phone rates. Next, we examined the effects of the vowels' phonological and phonetic information on listeners' perceptions of prosodic prominence. The results showed that vowels significantly affected the likelihood of perceived prominence independent of acoustic cues. The high and low vowels affected probability of perceived prominence less than the mid vowels /ɛ/ and /ʌ/, although the former two were more likely to be phonetically enhanced in the speech than the latter. Overall, these results suggest that perceptions of prosodic prominence in English are not directly influenced by signal-driven factors (i.e., vowels' acoustic information) but are mediated by expectation-driven factors (e.g., vowels' phonological information).

• Speech Sciences
• /
• v.8 no.1
• /
• pp.7-19
• /
• 2001

The acoustic parameters of nine Korean numbers were analyzed by Praat, a speech analysis software, and synthesized by SenSynPPC, a Klatt formant synthesizer. The overall intensity, pitch and formant values of the numbers were modified dynamically by a step of 1 dB, 1 Hz and 2.5% respectively. The study explored the sensitivity of listeners to changes in the three acoustic parameters. Twelve subjects (male and female) listened to 390 pairs of synthesized numbers and judged whether the given pair sounded the same or different. Results showed that subjects perceived the same sound quality within the range of 6.6 dB of intensity variation, 10.5 Hz of pitch variation and 5.9% of the first three formant variations. The male and female groups showed almost the same perceptual ranges. Also, an asymmetrical structure of high and low boundary was observed. The ranges may be applicable to the development of a speaker identification system while the method of synthesis modification may apply to its evaluation data.