• 말소리와 음성과학
• /
• 제9권4호
• /
• pp.59-67
• /
• 2017

Regardless of their intention, listeners tend to assess speakers' personalities based on the sounds of the speech they hear. Assessment criteria, however, have not been fully investigated to indicate whether there is any relationship between the acoustic cue of produced speech sounds and perceived personality impression. If properly investigated, the potential relationship between these two will provide crucial insights on the aspects of human communications and further on human-computer interaction. Since human communications have distinctive characteristics of simultaneity and complexity, this investigation would be the identification of minimum essential factors among the sounds of speech and perceived personality impression. The purpose of this study, therefore, is to identify significant associations between the speech sounds and perceived personality impression of speaker by the listeners. Twenty eight subjects participated in the experiment and eight acoustic parameters were extracted by using Praat from the recorded sounds of the speech. The subjects also completed the Neo-five Factor Inventory test so that their personality traits could be measured. The results of the experiment show that four major factors(duration average, pitch difference value, pitch average and intensity average) play crucial roles in defining the significant relationship.

• 한국소음진동공학회논문집
• /
• 제20권11호
• /
• pp.1001-1008
• /
• 2010

The architectural, facility makes the housing environment more pleasant, while too much noise coming from machinery room is detrimental to the workers physically and mentally. Therefore, more sound insulation and sound proof policies are increasingly required. However, as the annoyance caused by facility noise is influenced by various human listening characteristics as well as physical characteristics such as sound pressure level, it requires subjective evaluation characteristics through acoustic-psychological approach. For this purpose, the facility noise in the machinery room was actually measured and analyzed in the field to understand physical characteristics, and the correlation between physical evaluation value and psychological response value through listening test. Further, this study aims at presenting the data to set the standards of 'Just noticeable difference' of the facility noise together with reasonable evaluation with psychological reaction, through the grading of facility noise using trend formula. In the result, 13 stages of physical properties were forecasted for each evaluation method, together with 'Just noticeable difference' using the grading of architectural facility noise.

• 말소리와 음성과학
• /
• 제1권3호
• /
• pp.19-28
• /
• 2009

This paper reports experimental findings about the duration feature of the acoustic components of English stops in Korean speakers' voicing perception. In our experiment, 35 participants discriminated between recorded stimuli and digitally transformed stimuli with different duration features from the original stimuli. 72 sets of paired stimuli are generated to test the effects of the duration feature in various phonetic contexts. The result of our experiment is a complicated cross-tabulation with 540 cells defined by five categorical independent variables plus one response variable. To find a meaningful generalization out of this complex frequency table, we ran logit log-linear regression analyses. Surprisingly, we have found that there is no single effect of the duration feature in all phonetic contexts on Korean speakers' perception of the voicing contrasts of English stops. Instead, the logit log-linear analyses reveal that there are interaction effects among phonetic contexts (=C), the places of articulation of stops (=P), and the voicing contrast (=V), and among duration (=T), phonetic contexts, and the places of articulation. To put it in mathematical terms, the distribution of the data can be explained by a simple log-linear equation, logF=${\mu}+{\lambda}CPV+{\lambda}TCP$.

• 한국소음진동공학회논문집
• /
• 제12권9호
• /
• pp.694-701
• /
• 2002

In this paper, through the study on locations of structural transducers for active control of the radiated sound from the vibrating plate, the active structural acoustic control (ASAC) system is proposed. And, for the evaluation of the proposed location, the experiment of the active structural acoustic control is implemented using the multi-channel filtered-x LMS algorithm and an additional filter (Acoustic Prediction Filter) to estimate the radiated sound using the acceleration signals of the plate. The structural transducers are piezoceramic actuator (PZT) and accelerometer. PZT is used as an actuator to reduce the vibration and the radiated sound. To maximize the control performance, each PZT actuator is located at the position that has the largest control sensitivity of the plate bending moment in the direction of x and y coordinates and the optimal PZT location is validated experimentally. Also, to find the acoustic prediction filter accurately, two accelerometers are located at the positions that have the largest radiation efficiencies of the plate, and the proposed locations are validated by simulation using the Rayleigh integral. The multi-channel filtered-x LMS algorithm is introduced to control a complex 2-D structural vibration mode. Finding the locations of structural transducers for active structural acoustic control of the radiated sound, the active structural acoustic control (ASAC) system can be presented and validated by experiments using a real time control system.

• 재활복지공학회논문지
• /
• 제11권2호
• /
• pp.133-141
• /
• 2017

하이브리드 음향센서 (hybrid acoustic sensor)는 음압 기반의 음향센서 (ECM)와 진동 기반의 가속도 센서(acceleration sensor)가 접목된 구조이다. 이는 음향센서의 저주파 대역 감도와 가속도 센서의 고주파 대역 감도를 결합하여 저주파에서 고주파 대역까지 광범위하게 음향을 포집할 수 있다. 본 논문에서는 하이브리드 음향센서에 사용되는 가속도 센서를 제안하였다. 가속도 센서는 음향신호에 의해 발생되는 고막의 진동을 포집한다. 제안된 가속도 센서의 사이즈는 고막의 해부학적 구조와 음향센서인 ECM의 규격을 고려하여 직경 3.2 mm로 결정하였다. 그리고 하이브리드 음향센서가 고감도 광대역 특성을 가지도록 하기 위해서는 가속도 센서의 공진 주파수는 3.5 kHz 부근에서 생성되는 것을 목표로 하였다. 가속도 센서를 구성하는 진동막은 수학적 모델과 유한요소 해석을 통하여 기하학적 구조를 도출하였다. 이를 바탕으로 화학적 식각공정을 이용하여 진동막을 제작하였다. 그리고 제작된 진동막의 주파수 특성을 확인하기 위하여 외력에 의한 진동 측정 실험을 수행하였고, 실험 결과 진동막의 기계적 공진은 3.4 kHz에서 발생되었다. 그러므로 제안한 가속도 센서는 하이브리드 음향센서에 유용하게 활용될 수 있을 것으로 판단된다.

• 한국음향학회지
• /
• 제34권1호
• /
• pp.20-35
• /
• 2015

수중음향 전달채널의 임펄스 응답(Channel Impulse Response: CIR)은 음속구조(Sound Speed Profile: SSP)의 영향을 받으며, 채널 임펄스 응답의 변화는 수중음향통신 시스템의 성능에 중요한 영향을 미친다. 음속분포의 변화는 단기간 내에서도 나타날 수 있으며, 수중음향 모뎀 설계 시 반드시 고려되어야 한다. 이 논문은 2013년도에 제주도 동방해역에서 수행된 JACE13에서 취득된 데이터를 기반으로 음선전달 수치해석을 통해 단기간 동안 시간에 따라 변화하는 음속구조가 음향 신호 전달에 미치는 영향을 통계적으로 분석한 결과를 제시한다. 분석결과 송 수신기 수심별로 채널 임펄스 응답의 변화가 다양하게 나타나며, 송 수신기 수심이 깊을수록 음속구조의 변동에 따른 음향신호 전달 양상의 변화는 작아지고, 신호 준위가 높게 나타난다. 이 연구에서의 다양한 거리, 송, 수신기 수심에 따라 얻어진 채널 임펄스 응답 추정 결과는 수온약층에서의 하방굴절로 인한 연속된 해저면 반사와 작은 해저면 반사손실이 장거리 신호 전파에 중요한 요인이 될 수 있음을 보여주며, 시변동성을 갖는 해양환경에서의 수중 음향 통신은 시간에 따라서 성능이 충분히 달라질 수 있다는 것을 보여준다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2009년도 동계학술발표회 논문집
• /
• pp.435-436
• /
• 2009

LNG 선박에 설치된 대용량 탱크의 누출을 검사하는 방법으로 $NH_3$를 사용하고 있다. 본 논문에서는 광음향효과를 이용하여 $NH_3$의 흡수선을 조사하였고, 이를 이용하여 $NH_3$의 농도를 측정하는 방법을 실험하였다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1984년도 추계학술발표회 논문집
• /
• pp.96-99
• /
• 1984

In this study, the underwater acoustic images were obtained by ultrasonicwave. The experiment was performed in the anechoic watertank, using a passive sonar array for one and two sound source respectively by X-Y scanning technique. The receiving array was consist of 8 disc type transducers with 1.5cm diameter at 25KHz resonance frequency. The scanned data were processed by the FORTRAN IV algorithm for the reconstruction of image, and the image had some noise due to the surface reflected waves. As the result, it was found that the acoustic imaging by electrical deflection and dynamic focusing technique is applicable to SONAR with the suppression of surface reflected wave.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.114-118
• /
• 1996

Evaluation of cutting condition is one of the most important aspect to improve productivity and quality. In this study, the wear and cutting characteristics(cutting force, acoustic emission signal and surface roughness) of ceramic cutting tool for hardened die material(SKD11) were investigated by experiment. Flank wear on relief face of tool was occurred more dominant than crater wear on rake face. Experiments were performed under the various cutting condition.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.317.2-317
• /
• 2002

Transmission loss of KHST passenger vehicle was calculated using measured acoustic data: In order to verify the transmission loss results for KHST case, similar experiment was carried out in laboratory condition, which result was compared those by geometric acoustic method. The computational results shows good agreement with the transmission loss magnitude from experiments. This paper also mentions items to obtain more accurate transmission loss values, i. e. how to assure reverberant field condition, the selection of source speaker' location.