• 한국생산제조학회지
• /
• 제23권1호
• /
• pp.27-31
• /
• 2014

This paper describes a tomographic imaging technique for evaluating the thickness reduction of a plate-like structure using a noncontact sensor network based on an electromagnetic acoustic transducer that generates shear horizontal plate waves. Because this technique is based on the effect of mode cutoff and time of flight of guided waves caused by a change in thickness, the tomographic image provides information on the presence of defects in the structure. To verify the performance of the method, artificial defects with various thickness reduction ratios were machined in an aluminum plate, and the tomographic imaging results are reported. The results show that the generated tomographic image displays the thickness reductions and can identify their locations. Therefore, the proposed technique has good potential as a tool for health monitoring of the integrity of plate-like structures.

• International Journal of Aeronautical and Space Sciences
• /
• 제7권2호
• /
• pp.26-32
• /
• 2006

This paper targets a direct and quantitative prediction of characteristics of unstable waves in a combustion chamber, which employs the governing equations derived in terms of amplification factors of flow variables. A freshly formulated nonlinear acoustic equation is obtained and the analysis of unsteady waves in a rocket engine is attempted. In the present formalism, perturbation method decomposes the variables into time-averaged part that can be obtained easily and accurately and time-varying part which is assumed to be harmonic. Excluding the use of conventional spatially sinusoidal eigenfunctions, a direct numerical solution of wave equation replaces the initial spatial distribution of standing waves and forms the nonlinear space-averaged terms. Amplification factor is also calculated independently by the time rate of changes of fluctuating variables, and is no longer an explicit function for compulsory representation. Employing only the numerical computation, major assumptions inevitably inherent, and in erroneous manner, in up to date analytical methods could be avoided. With two definitions of amplification factor, 1-D stable wave and 3-D unstable wave are examined, and clearly demonstrated the potentiality of a suggested theoretical-numerical method of combustion instability.

• Smart Structures and Systems
• /
• 제18권3호
• /
• pp.471-484
• /
• 2016

Optical fiber sensors have been proven that they have the potential to detect high-frequency ultrasonic signals, in structural health monitoring field which generally refers to acoustic emission signals from active structural damages and guided waves excited by ultrasonic actuators and propagating in waveguide. In this work, the sensing properties of optical fiber sensors based on Mach-Zehnder interferometer were investigated in the metal plate. Analytical formulas were conducted first to explore the parameters affecting its sensing performances. Due to the simple and definable frequency component, the Lamb wave excited by the piezoelectric wafer was employed to study the sensitivity of the proposed optical fiber sensors with respect to the frequency, rather than the acoustic emission signals. In the experiments, according to above investigations, spiral shape optical fiber sensors with different size were selected to increase their sensitivity. Lamb waves were excited by a circular piezoelectric wafer, while another piezoelectric wafer was used to compare their voltage responses. Furthermore, by changing the excitation frequency, the tuning frequency characteristic of the proposed optical fiber sensor was also investigated experimentally.

• Smart Structures and Systems
• /
• 제19권2호
• /
• pp.195-202
• /
• 2017

The aim of this paper is to develop a novel method to determine the severity of a damage in a thin plate. This paper presents a novel fault detection and diagnosis approach employing a new electromagnetic acoustic transducer, called EMAT, together with a complex signal processing method. The method consists in the recognition of a fault that exists within the structure, the fault location, i.e. the identification of the geometric position of damage, and the determining the significance of the damage, which indicates the importance or severity of the defect. The main scientific novelties presented in this paper is: to develop of a new type of electromagnetic acoustic transducer; to incorporate wavelet transforms for signal representation enhancements; to investigate multi-parametric analysis for noise identification and defect classification; to study attenuation curves properties for defect localization improvement; flaw sizing and location algorithm development.

• 대한전자공학회논문지SD
• /
• 제45권4호
• /
• pp.64-71
• /
• 2008

SAW(Surface Acoustic Waves)를 기반으로 passive RFID(Radio Frequency IDentification) tag 및 송수신 시스템을 제작하였다. Pulse position encoding 방식의 SAW ID 태그(tag)를 제작하여 amplitude on/off 방식의 SAW ID 태그에 비해 3배의 데이터 용량 증대 효과를 얻을 수 있었다. 또한, 수신 시스템을 heterodyne 방식과 direct conversion 방식으로 제작하였다. 측정 결과 direct conversion 방식으로 제작된 수신 시스템이 heterodyne 방식의 수신 시스템과 비교하여 isolation 특성이 10 dB 증가하였으며, 그 결과 무선 도달 거리가 증가했다.

• 에너지공학
• /
• 제12권1호
• /
• pp.29-34
• /
• 2003

압력파의 일종인 열음향파는 압축성유체를 급속히 가열 또는 냉각하는 경계면 근처에서 유체가 순간적으로 압축 및 팽창하는 경우에 발생하는 현상으로 자연대류가 일어나지 않는 우주공간에서는 매우 중요한 열전달 메커니즘이다. 본 연구에서는 공기로 채워진 공간에서 급속한 가열에 의하여 발생한 열음향파의 전달특성을 수치적인 방법에 의하여 평가하고자 유한체적법을 기반으로 비정상 지배방정식을 이산화하였으며, PISO알고리즘과 2계 상향기법을 적용하여 해석을 수행하였다. 안정적인 수치해는 50 $\times$ 800 개의 셀과 1 $\times$ $10^{-9}$ 시간간격을 적용하여 얻을 수 있었으며, 생성된 열음향파는 유체 속을 통과하면서 점성과 열소산에 의하여 점점 감쇠하여 가는 경향을 보였다. 생성된 압력파는 날카로운 전단과 점점 감소하여 길게 늘어지는 후단부를 갖는 형상을 보였다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2004년도 춘계학술발표대회 논문집 제23권 1호
• /
• pp.225-230
• /
• 2004

Leak noise is a good source to identify the exact location of a leak point of underground water pipelines. Water leak generates broadband noise from a leak location and can be propagated to both directions of water pipes. However, the necessity of long-range detect ion of this leak location makes to identify low-frequency acoustic waves rather than high frequency ones. Acoustic wave propagation coupled with surrounding boundaries including cast iron pipes is theoretical analyzed and the wave velocity was confirmed with experiment The leak locations were identified both by the acoustic emission (AE) method and the cross-correlation method. In a short-range distance, both the AE method and cross-correlation method are effective to detect leak position. However, the detect ion for a long-range distance required a lower frequency range accelerometers only because higher frequency waves were attenuated very quickly with the increase of propagation paths. Two algorithms for the cross-correlation function were suggested and a long-range detection has been achieved at real underground water pipelines longer than 300m.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제4권1호
• /
• pp.51-55
• /
• 2001

The characteristics of elastic waves emanating from crack initiation in 2024 and 5052 aluminum alloys subject to static and fatigue loading are investigated through laboratory experiments. The objective of the study is to determine difference in the properties of the signals generated from static and fatigue tests and also to examine if the sources of the waves could be identified from the temporal and spectral characteristics of the acoustic emission (AE) waveforms. The signals are recoded using non-resonant, flat, broadband transducers attached to the surface of the alloy specimens. The time dependence and power spectra of the signals recorded during the tests were examined and classified according to their special features. Three distinct types of signals were observed. The waveforms and their power spectra were found to be dependent on the material and the type of fracture associated with the signals. Analysis of the waveforms indicated that some signals could be attributed to plastic deformation associated with static tests. The potential application of the approach in health monitoring of aging aircraft structures using a network of surface mounted broadband sensors is discussed.

• 대한의용생체공학회:의공학회지
• /
• 제13권3호
• /
• pp.195-200
• /
• 1992

This paper deal with the acoustic cues of Pyoung-An Do dialect using linear prediction. Also, this paper descrbes a statistical comparison between standard tone speech data and Pyoung-An Do dia lects. The analysis done mainly focused on the distribution of formants and pitch periods accord to ac- cents variation. For the purpose of objective comparison, the experiments are performed by extracts for- mant LPC spectrum and pithch periods from average magnitude difference function waveforms. Summing up the results, In disyllable words (VCV pattern) , prepositioned vowels have longer phona lion time than postpositioned vowels and the intrin, iii phonation time is whore longer in the low vowels than in the high ones. The africative consonants show the mixed characteristics of the plosive and frlc ative consonants. The remarkable acoustic cues are the low frequency noise-like waves just before the 1st formants in the plosive consonants, the high frequency noise-like waves in the fricative consonants, and phonation time is not affected by the kinds of prepositioned or postpositioned vowels.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.946-956
• /
• 2008

Acoustic emission(AE) is low-energy seismic event associated with a sudden inelastic deformation such as the sudden movement of existing fractures, the generation of new fractures or the propagation of fractures. These events rapidly increase before major failure and happen within a given rock volume and radiate detectable seismic waves. Rock slopes are usually large in scale and there are many discontinuities in rock mass. AE waves are strongly attenuated when they propagate through joints. Thus we should resolve the attenuation problem to monitor large volume. In this study, we developed waveguide which is composed of two different materials, cement mortar and stainless steel rod. And several laboratory tests on developed waveguide are performed to obtain generalized AE parameters to predict the failure stage in rock slope. Comparing field data with experimental data in laboratory tests, failure stage of rock slope can be evaluated. To verify and optimize the developed monitoring method, we are now carrying out the field application at a rock slope.