• 대한기계학회논문집A
• /
• 제24권5호
• /
• pp.1314-1322
• /
• 2000

The acoustic property of reactive type single expansion chamber can be analyzed by traditional plane wave theory. This theory can be applied in low frequency range and has good performance. But this theory can't include higher order modes, therefore another method is essential to analyze acoustic filter in high frequency range. Many researcher suggested the method that can concern higher order modes, and their methods are using mode matching technique. But there is no method that can be applied to the analysis of single expansion chamber with arbitrary inlet/outlet duct position and numbers of higher order modes of inlet/outlet duct and middle chamber. In this paper, the method which can analyze single expansion chamber with arbitrary inlet/outlet duct position and numbers of higher order modes of inlet/outlet duct and middle chamber using fundamental mode matching technique, was suggested and the predictions by this method was compared with those by the finite element method, and the influence of inlet/outlet location to acoustic performance of single expansion chamber is investigated and explained by higher order mode effects.

• 한국소음진동공학회논문집
• /
• 제12권6호
• /
• pp.431-436
• /
• 2002

The interior sound pressure level of the Korean high-speed train(KHST) is predicted by geometrical acoustic method. For the Purpose of assuring the prediction of Interior noise of KHST by the geometrical acoustic scheme, calculated sound level values of the Korean train express(KTX) by Identical geometrical method are compared with measured values of KTX prototype vehicle by experiment. Contribution of individual sound source of KHST vehicle Into the interior response positions is calculated and sound sources are classified in influential order. Hence, it is reasonable approach to reduce sound power of most contributing noise source first. Sensitivity of the interior response position's sound pressure level (SPL) with respect to train wall sections' transmission loss are carried on and acoustically sensitive spot is identified, for example window area for passenger cabin case. Those contribution and sensitivity analysis results are suggested to design quieter train efficiently.

• 한국음향학회지
• /
• 제20권4호
• /
• pp.5-11
• /
• 2001

무반향 수조의 내벽 흡음재로 사용되는 무반향 타일을 쐐기형으로 제작하여 쐐기의 꼭지각 변화에 따른 음향학적인 특성을 고찰하였다. 실험에서 사용된 무반향 타일 평판 시료의 크기는 400mm x 385mm x 15.5 mm이며, 무반향 타일을 구성하는 쐐기의 길이는 27.5mm로 고정하였다. 음선추적법을 이용하여 무반향 타일 시료 평판에 부착될 흡음쐐기의 꼭지각을 각각30°와 60°로 설계 및 제작하였으며, 수중에서 쐐기가 부착되지 않은 평판형 무반향 타일과 흡음쐐기의 꼭지각이 30°와 60°인 무반향 타일에 음파를 수직 입사하여 반사손실을 측정하였다. 또한 쐐기의 유무와 무반향 타일을 구성하는 쐐기의 꼭지각 변화에 따른반사 및 흡음특성을 고찰하였다. 쐐기의 꼭지각이 30°일 때 60°보다 반사손실이 증가함을 이론을 통해 예측하였고, 실험을 통해 확인할 수 있었다. 본 실험의 결과로써 음선추적법을 이용하여 설계 및 제작한 무반향 타일의 흡음쐐기의 꼭지각이 30°인 무반향 타일의 흡음특성이 우수함을 확인할 수 있었다.

• 한국음향학회지
• /
• 제6권3호
• /
• pp.17-22
• /
• 1987

새로운 차음성능 측정방법인 표면인텐시티법을 이용하여 실제 건축물의 현장에서 각부위별 차음성능 평가하고. 이를 종래의 음압측정방법과 은향인텐시티법 및 이론계산에 의한 결과 치 와 비교 . 검토하였다. 표면인텐시티법에 의한 건물부위의 차음성능 측정결과치는 음향인 텐시티법 및 이론계산에 의한 결과치와 잘 일치하였으며, 표면 인텐시티법은 음향인텐시티 법과 더불어 종래의 음압측정방법에 비해 측정시 주위 암소음 및 flanking transmission의 영향을 적게 받는 것으로 나타났다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.526-531
• /
• 2011

A dash panel component, close to passengers, plays a very important role to protect heat and noise from a power train. Meanwhile, it is also a main path that transfers vibration energy and eventually radiates acoustic noise into the cavity. Therefore, it seems important to provide an optimal design scheme incorporating sound packages such as dash isolation pad and carpet, as well as structures. The present study is the extension of the previous investigation how design variables affect sound radiation, which was carried out using the simple plate and framed system. The system taken into account in this paper is a dash panel component of a sedan, which includes A pillar, front side member, dash panel and the corresponding sound packages. Design variables such as panel thickness and sound package layers are investigated how they are related for the better radiation performance (i.e. structure-borne) and sound transmission loss (i.e. air borne).

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.197-202
• /
• 2005

Current Optical Disk drive is dominating high share gradually in information storage device market through development of great skill. These technologies can achieve not only improvement of transmission speed but also elevation of recording/reproduction technology. However, these present state cause not only the increase of vibration in structural viewpoint but also problem of serious noise while the ODD becomes high speed/high performance. Specially, air-born noise is being bigger than structural-born noise as disk rotation speed increases gradually. The object of this research is that reduce the air-born noise in optical disk drive by reducing a quantity of flow by using a miniaturized muffler. The micro muffler is a miniaturized muffler. The muffler is used widely by solution to reduce air-born noise which is generated by flow. According to frequency band of the noise source, it can be applied by muffler of various forms. In this research, we examined the noise characteristics of the micro muffler and applied it by noise reduction solution of the ODD. It could get an excellent noise reduction in high frequency band by using the micro muffler than the opened case through the decrease of an inner flow. But it could not get a noise reduction in low frequency band through the decrease of an inner flow.

• 대한환경공학회지
• /
• 제35권8호
• /
• pp.592-597
• /
• 2013

방음패널의 차음특성은 재료의 면밀도와 소음의 주파수와 높은 상관관계가 있으므로 방음패널의 두께 및 재료의 선택에 있어 실제 도로소음의 특성을 반영하는 것은 매우 중요하다. 본 연구에서는 재료의 경량 및 시공측면에서 수요가 증가하고 있는 플라스틱 소재 중 방음패널로 활용 가능한 소재를 선정하여 도로교통 소음의 주파수에 따른 차음특성을 평가하였다. 대상 패널은 물리적 특성을 조사하여 효율성 및 경제성 평가를 통해 polypropylene (PP)과 high-density polyethylene (HDPE)를 선정하였고 현재 방음패널의 재료로 사용되고 있는 polycarbonate (PC)와 polymethyl methacrylate (PMMA)와의 재료 및 두께에 따른 차음특성을 비교하였다. 그 결과 방음패널의 차음특성은 재료의 면밀도에 비례하여 PC, PMMA, HDPE, 그리고 PP순으로 높은 투과손실치를 나타내었다. 두께별 차음특성의 경우, 방음패널 두께에 비례하여 투과손실이 증가하나 일치효과로 인해 투과손실이 감소하는 주파수가 낮아짐을 확인할 수 있었다. 결론적으로, 저감하고자 하는 소음의 주파수대역을 먼저 파악하고 방음패널의 재질과 두께에 따른 주파수별 차음특성을 파악하여 적용한다면 효과적으로 소음을 저감할 수 있을 것으로 판단된다.

• 한국철도학회논문집
• /
• 제4권1호
• /
• pp.9-15
• /
• 2001

It is required that the indoor-noise level of KHST (Korean High Speed Train) should be lower than 66 dB(A) at 300 km/h. In this study, the indoor-noise level of KHST has been predicted to determine the maximum allowable sound power levels of major noise sources. It is found that the indoor-noise requirements for KHST can be met by increasing the transmission losses of the floor and side-wall structures as well as by lowering the sound power levels of the major noise sources.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1335-1340
• /
• 2001

The information technology brought us many kinds of conveniences to our life, but it also caused social problems such as privacy interference, unexpected personal information leaks, and nose generation by telephonic talks, etc. In this paper, the microphone system of the cellular phone is developed to prevent these problems caused by progress of information technology. The developed system was designed to detect only acoustic signals from a human being in the presence of various kinds of background noises. A windscreen was designed by use of micro-channels to eliminate the popping noise by the wind from the mouth of a speaker and four microphone array and signal processing techniques are applied to reduce background noise. The impact of the developed system was evaluated by experimental tests. The results show that the system can improve the required functions considerably.

• 한국소음진동공학회논문집
• /
• 제22권1호
• /
• pp.22-28
• /
• 2012

While a dash panel component, close to passengers, plays a very important role to protect heat and noise from a power train, it is also a main path that transfers vibration energy and eventually radiates acoustic noise into the cavity. Therefore, it is important to provide optimal design schemes incorporating sound packages such as a dash isolation pad and a floor carpet, as well as structures. The present study is the extension of the previous investigation how design variables affect sound radiation, which was carried out using the simple plate and framed system. A novel FE-SEA hybrid simulation model is used for this study. The system taken into account is a dash panel component of a sedan vehicle, which includes front pillars, front side members, a dash panel and corresponding sound packages. Design variables such as panel thicknesses and sound packages are investigated how they are related to two main NVH indexes, sound radiation power(i.e. structure-borne) and sound transmission loss(i.e. air borne). In the viewpoint of obtaining better NVH performance, it is shown that these two indexes do not always result in same tendencies of improvement, which suggests that they should be dealt with independently and are also dependent on frequency regions.