• 산업기술연구
• /
• 제9권
• /
• pp.43-49
• /
• 1989

In this study, 3-point bending test for the mode I state and 4-point shear test for the mode II state were adopted to verify the crack initiation load level through comparing the test results of the acoustic emission and the ASTM testing criteria, using Jecheon granite, as the rock sample. The major result obtained in this study is that the crack initiation load levels obtained by using ASTM testing criteria and by measuring acoustic emissions showed analogous, roughly. However in case of demanding high safety, the crack initiation load level needs to be underestimated to the level that the crack begins to deform nonlinearly.

• 대한음성학회지:말소리
• /
• 제60호
• /
• pp.145-164
• /
• 2006

This paper proposes class histogram equalization (CHEQ) to compensate noisy acoustic features for robust speech recognition. CHEQ aims to compensate for the acoustic mismatch between training and test speech recognition environments as well as to reduce the limitations of the conventional histogram equalization (HEQ). In contrast to HEQ, CHEQ adopts multiple class-specific distribution functions for training and test environments and equalizes the features by using their class-specific training and test distributions. According to the class-information extraction methods, CHEQ is further classified into two forms such as hard-CHEQ based on vector quantization and soft-CHEQ using the Gaussian mixture model. Experiments on the Aurora 2 database confirmed the effectiveness of CHEQ by producing a relative word error reduction of 61.17% over the baseline met-cepstral features and that of 19.62% over the conventional HEQ.

• 한국항공우주학회지
• /
• 제34권10호
• /
• pp.32-39
• /
• 2006

노즐 조립체에 대한 구조건전성을 평가하기 위한 구조강도시험에 음향방출 기법을 적용하였다. 이들 결과는 스트레인 및 변위 측정 결과와 비교 분석 되었으며, AE 기법의 신뢰도를 향상시키기 위하여 X-ray를 이용한 NDT 기법이 각 시험 전과 후에 실시되었다. 노즐 조립체에 대한 구조건전성 평가 시험에서 스트레인 및 변위 결과로는 구조물의 국부적인 균열 생성 현상을 정확하게 규명하기 곤란하였으나, AE 기법을 이용함으로써 균열들의 생성위치 및 하중을 정확하게 평가할 수 있었다. 이 시험을 통하여, 사출판과 노즐 조립체 사이에 존재한 간섭현상으로 인한 예기치 않은 하중에서 노즐 조립체의 복합재 내에 새로운 균열이 생성될 수 있음이 확인되었으며, 이들 균열은 구조물의 급격한 기능 상실의 원인이 될 수 있는 것으로 파악되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제17권4호
• /
• pp.38-48
• /
• 1993

A study on friction welding of stainless steel bar(SUS431) to chrome molybdenum steel bar(SCM21) was accomplished experimentally through analysis for relations among friction welding conditions, tension test, hardness test, microstructure test and acoustic emission test. The results obtained are summarized as follows ; 1. Through friction welding of SUS431 bar to SCM21 bar, the optimum welding condition by considering on strength and toughness was found to be the range of heating time of 3-5 sec when the number of rotating speed of 2000rpm, heating pressure of 10kg/$mm^2$, and upsetting time of 4 sec. 2. Quantitative ralationship was identified between heating time($T_1$, sec) and tensile strength (${\sigma},\;kgf/mm^2$) of the friction welded joint and the relation equation is $\sigma$=52.62$T_1{^{0.06}}$. 3. Through AE test, quantitative relationship was confirmed between heating time($T_1$, sec) and total AE(N, counts) during welding, and the relation is computed as follows ; N=30413.6$e^{0.06T1}$. 4. It was confirmed that the quantitative ralationship exists between the tensile strength of the welded joints and AE cumulative counts. And the relation is computed as the following ; ${\sigma}$=16.37(ln N)- 116.4. 5. When ONZ=36500-41500 counts by $OT_1Z$=3~5sec, it was identified by experiment that the range of welded joint tensile strength is 55.6-57.7kgf/$mm^2$/ whose joint efficiency is more than 100%, and it was experimentally confirmed that the real-time nondestructive quality(strength) evaluation for the friction welded joints could be possible by acoustic emission technique.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2008년도 공동학술대회
• /
• pp.41-46
• /
• 2008

국가하천을 대상으로 정밀외관조사에 의해 선정된20개 배수통문에 대하여 지표 물리탐사법외에 수리학적인 원리를 이용한 연통시험이나 초음파주사검층과 같은 공내시험법을 적용하여 배면의 공동상태를 보다 정확하게 파악하고자 하였다. 타음조사나 GPR 탐사, 3차원 전기비저항탐사 및 초음파주사검층은 일부 성공적인 결과를 얻을 수 있었으나 현장특성에 따라 적용이 용이하지 않은 경우가 발생하였다. 반면 연통시험의 경우에는 통문하부 공동의 유무 및 연통상태를 성공적으로 감지할 수 있었다. 그러나 연통시험은 공동의 규모나 형태에 대한 정량적인 정보를 제공하는데 근본적인 한계를 가지고 있으므로 보다 정확한 조사를 위해서는 현장특성에 맞는 다양한 조사법이 적용되어 종합적인 해석이 이루어야져야 할 것이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3383-3388
• /
• 2007

To compare the sensor performance of AE leak diagnosis system which can measure valve leak conditions, AE activities such as RMS voltage level, AE signal trend, leak rate degree according to AE database, FFT spectrum were measured on valve of the simulated test system for power plant. AE activities were recorded and analyzed from various operating conditions including different temperature, pressure difference, valve size and fluid using both piezoelectric acoustic emission sensor and Pb-Free acoustic emission sensor. The results of this study are utilized to select the type of sensors, the frequency band for filtering and thereby to improve the signal-to-noise ratio for diagnosis or monitoring of valves in operation. As the final result of application study above, portable type leak diagnosis system by AE was developed. The outcome of the study can be definitely applied as a means of the diagnosis or monitoring system for energy saving and prevention of accident for power plant valve.

• 말소리와 음성과학
• /
• 제3권4호
• /
• pp.109-115
• /
• 2011

The purposes of this study were to identify acoustic parameters of connected speech and to contribute to acoustic analysis of dysphonic voice about patient's natural speech voice as well as sustained phonation of vowels. Acoustic parameters of sentences included LTAS (long-term average spectrum) mean and spectral slope over frequence ranges such as 0-4kHz, 0-6kHz, 0-8kHz, 0-12.5kHz as well as HNR. Acoustic parameters of the vowel 'a' included jitter, RAP, shimmer, NHR, and HNR. Based on 'G' of GRBAS for the severity of dysphonia, two experienced raters judged and classified as four groups including controls, mild, moderate and severe dysphonic group. Connected speech was two sentences extracted from 'stroll' passage. Parameters of the vowel and LTAS mean of the sentences were measured by CSL. The spectral slope of the sentences and HNR of the vowel and the sentences were measured by Praat. Data were statistically analyzed by Spearman correlation and Kruskal-Wallis test using SPSS 12.0. The results of this study are as follows: First, jitter, RAP, shimmer and NHR were significantly different between the groups. Second, for several frequencies, LTAS mean and spectral slope of the sentences were significantly different between the groups. Third, the HNR of the sentences were significantly different between the groups. Forth, there was a presence of correlation between HNR and NHR of the vowel and HNR of the sentences. Accordingly, this study concluded that LTAS, spectral slope, and HNR were predictive parameters of connected speech voice for dysphonic voice.

• 에너지공학
• /
• 제12권3호
• /
• pp.207-215
• /
• 2003

음파 에너지가 인가된 상태에서 전기집진기의 성능 변수 변화에 따른 집진 효율 특성에 대한 실험적인 연구를 수행하였다. 실험을 위하여 주파수 2 kHz 및 음압 141 dB의 음파 에너지를 2단 전기집진기로 유입되는 함진 가스에 인가하였으며, 인가되는 고전압의 크기를 일정하게 유지하고 집진부에서의 가스유속의 변화를 실험 변수로 사용하였다. 실험의 결과, 음파에너지의 인가에 의하여 전기집진기의 집진 효율은 증가하였으며, 또한 집진효율의 증가 경향은 집진부에서의 가스 유속이 증가할수록 뚜렷하게 나타남을 보였다. 이 결과로부터 음파에너지는 전기집진기의 비집진 면적을 증가시키는 효과로 나타남을 알 수 있었다.

• 소성∙가공
• /
• 제29권1호
• /
• pp.20-26
• /
• 2020

In the design of the metal forming processes, various types of ductile fracture criteria are used to predict crack initiation and to fabricate metallic products without any defects. However, the quantitative measurement method for determination of crack initiation is insufficient. It is very difficult to detect crack initiation in ductile metals with excellent deformability because no significant load drop is observed due to crack generation. In this study, the applicability of acoustic emission sensors, which are commonly used in facility diagnostics, to measure crack initiation during the metal forming process was analyzed. Cylindrical notch specimens were designed using the finite element method to induce a premature crack on the surface of pre heat-treated steel (ESW90) material. In addition, specimens with various notch angles and heights were prepared and compression tests were carried out. During the compression tests, acoustic emission signal on the dies and images of the surface of the notch specimen were recorded using an optical camera in real time. The experimental results revealed that the acoustic emission sensor can be used to detect crack initiation in ductile metals due to severe plastic deformation.

• 한국음향학회지
• /
• 제24권2호
• /
• pp.111-116
• /
• 2005

본 연구는 주관적 음향평가를 통하여 콘서트 홀에서 선호되는 음향특성과 중요한 음향지표 조사에 그 목적이 있다. 호주의 두 콘서트 홀 (이하 Hall A와 Hall B로 가칭함)에서 더미헤드 (Dummy Head)로 녹음된 음악을 이용하여 음향평가를 위한 청감실험을 통해 실시하였다. 평가된 두 콘서트 홀의 음향선호도는 측정된 음향지표와의 상관도를 분석하여 실제 홀에서의 음향평가에 기여하는 음향지표를 조사하였다. 청감실험에서 피험자들은 Hall B가 Hall A에 비해 음향적으로 우수하다는 결과를 보여주었으며, Hall A의 낮은 음향선호도는 전문음악가와의 인터뷰조사결과와 유사하였다. 두 콘서트 홀의 음향평가에 가장 중요한 음향지표는 음압레벨로 밝혀졌다.