• 한국자동차공학회논문집
• /
• 제8권6호
• /
• pp.247-258
• /
• 2000

It is thought that impact damages and hygrothermals can affect to CFRP (Carbon-fiber reinforced plastic) composite laminated due to the sensitivity on the composite laminated Therefore, this paper focuses on the fracture mechanisms experimentally based on a scanning acoustic microscope (SAM) when subjected to impact damages, i.e., foreign object damages(FOD), and also the influence of impact damages and hygrothermals on residual fatigue bending strength of CFRP laminates. Composite laminates used in the experiment are CF/EPOXY orthotropy laminated plates, which constist of two-interfaces [04/904]s. A steel ball launched by an air gun collides against CFRP laminates to generate impact damages. Bending fatigue tests are periodically interrupted for a nondestructive evaluation (NDE) measurement of the progrossive damages to built the fracture mechanism by impact damages, and three-point fatigue bending tests are carried out to investigate the influence of hygrothermals on the effect on the residual bending fatigue strength of CFRP laminates.

• 한국자동차공학회논문집
• /
• 제21권3호
• /
• pp.142-147
• /
• 2013

Over the past few years, intelligent tire is developed very actively for more accurate measurement of real-time tire forces generated during vehicle driving situation. Information on the force of intelligent tire could be used very usefully to chassis control systems of a vehicle. Intelligent tire is based on deformation of tire's inner surface from the waveform of a SAW, or Surface Acoustic Wave. The tire vertical force is estimated by using variance analysis of sensor signals. The estimated tire vertical force is compared with the tire vertical force generated during vehicle driving situation in real-time environment. The scope of this paper is a correlation study between the measured sensor signals and the tire vertical force generated during vehicle driving situation.

• 전기학회논문지
• /
• 제63권8호
• /
• pp.1039-1045
• /
• 2014

Acoustic noise from a transformer, recently, has drawing more and more attentions. One of the main source of the noise is thought to be magnetostriction of the electrical steel sheets which compose transformer core. This paper deals with the magnetostriction of a highly grain-oriented electrical steel sheet measured by using a vector single sheet tester and a three-axial strain gauge. The results show that direction and axis ratio as well as the magnitude of the applied magnetic flux density contribute much to magnetostriction.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.1346-1353
• /
• 1993

Recently , it has been popular for family use to sell a watermelon by the piece such as a half or a quarter. Therefore, it has been necessary to detect and sort out hollow or overripened watermelons before they are shipped. Previously, inspection and rejection of hollow or overripened watermelons were carried out by skilled inspectors with their experience and intuition based on the traditional slapping method. In recent years many inspectors have became older and are going to retire. Thus automatic quality measuring devices have to be developed. There are many reports on the measurement of internal quality for watermelons with non-destructive methods. However, there is no online device to detect and measure both hollow and ripeness of watermelons until now. We have developed the model MWA-9002 online device to detect hollow and measuring the ripeness of watermelons by acoustic impulse. The developed of this devices has enables accurate distinction and rejection at the same level of the skilled inspectors, and also has saved labor. Nowadays nine automatic watermelon sorting and packing facilities applied this device have installed in Japan.

• 한국음향학회지
• /
• 제10권3호
• /
• pp.13-18
• /
• 1991

본 연구에서는 취약한 고체의 표면에 존재하는 crack에 탄성표면파를 입사 시켰을 때 발생하는 반사계수를 측정하여 파괴응력을 해석하는 방법을 연구 분석하였다. Crack이 존재하는 취약한 고체에서의 파괴응력은 임계응력확대계수와 정규화된 최대응력확대계수의 함수로써 나타나며, 이 때 정규화된 최대응력확대계수는 탄성표면파의 반사계수를 측정하여 구할 수 있었다. 실험을 위하여 Pyrex glass원판 중앙에 깊이가 0.5mm~0.9mm인 crack을 제작하였고, SAW wedge transducer를 피치캐치(pitch-catch) 모드로 구성하여 반사계수를 측정하고 파괴응력값을 산출하였으며 UTM(Universal Testing Machine)으로 측정한 값과 비교 분석하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.252-257
• /
• 1988

This paper discribes an improved technique for locating partial discharge sites within operating transformers by ultrasonic method which utilizes the different travel times of the electrical and ultrasonic signals produced by partial discharges to determine the location of the sources. The technique was to develope the measurement system based on the enhancement of the acoustic emission signals using signal square, circuit to improve the detectable sensitivity and reliability. Also an ultrasonic pulse generator was designed and made to transmit periodically pulses equivalent to pratial discharges and to check the good performance of the system, echo effects and self-diagnosis. Through the laboratory work, it was confirmed that the system and the generator can be used satisfactorily for diagnosing power transformers and for studying echo effects and self-diagnosis of the system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1441-1443
• /
• 1998

In this work, the effects of space charge was analyzed in removal efficiency of pollutant using dielectric barrier discharges. In order to investigate effects of space charge, two dielectrics(XLPE and TR-XLPE) was chosen which are different in space charge distribution. The simultaneously measurement of space charge and discharge current was carried out in XLPE and TR-XLPE with air gap by Pulsed-Electro-Acoustic Method in ac. Also, the removal efficiency is measured by classical ozone generator(von Siemens 1875). From the experimental results, we knew that the space charge distribution affects the discharge patterns. The more space charge is in surface, the quickly discharge initiates and the magnitude of discharge is increased when polarity changes. And these affect the removal efficiency of pollutant.

• 마이크로전자및패키징학회지
• /
• 제6권3호
• /
• pp.1-7
• /
• 1999

본 연구에서는 900MHz대역 수신기용으로 선행 개발되어진 RF 칩세트를 장착한 RF 특성평가 보드를 개발하였으며, 환경평가시험을 수행하였다. 선행 개발되어진 RF-IC 칩에는 저잡음증폭기, 하향변조 주파수혼합기, AGC Amp, SW-CAP 필터 등을 포함하고 있으며, 이에 따른 정합회로와 RF/IF SAW 필터, 듀플렉서 필터 및 전원공급회로를 RF 특성평가보드에 첨가하여 제작하였다. 공급전원은 2.7에서 3.6V이며, RF 보드의 소모전류는 42mA로 나타났으며, 동작 주파수는 RF 입력이 925~960MHz으로 제작, 측정되었다. 측정결과 일반적인 900MHz용 디지털 이동통신단말기의 RF 수신특성과 유사하게 양호한 결과를 보였다.

• 말소리와 음성과학
• /
• 제5권4호
• /
• pp.137-143
• /
• 2013

Recent investigation of acoustic correlates of Korean stop manner contrasts has reported a diachronic transition in Korean stops: young Seoul speakers are relatively more dependent on the F0 characteristics of the stops than on the VOT characteristics in aspirated and lenis stop distinction. This finding has been examined against tonal dialects of Korean and the results suggested that the speakers of tonal dialects are not sharing the transition. These results also suggested that F0 function for segmental stop classification interferes with the function for lexical tone classification in their tonal speech. The current study investigated these findings in terms of perception. Perceptual behavior of Seoul and Busan speakers of Korean was examined in a comparative manner through the measurement of perceptual cue weight of F0 and VOT in particular. The results from regression and correlation analyses revealed that Busan speakers are closer to older Seoul speakers than to younger Seoul speakers in that the cue weight for VOT and F0 were comparable in the aspirated-lenis stop distinction. This result was in contrast to the perceptual behavior of younger Seoul speakers who showed clear dominance of F0 over VOT for the same distinction. These findings provided perceptual evidence of the dual function of F0 for segmental and lexical distinctions in tonal dialects of Korean.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.254-257
• /
• 2004

An electromagnetic acoustic transducers (EMAT) can usually generate or detect an ultrasonic wave into specimens across a small gap. Especially stiffness of composites depends on layup sequence of CFRP(carbon fiber reinforced plastics) laminates because the layup of composite laminates influences there properties. It is very important to evaluate the layup errors in prepreg laminates. A nondestructive technique can therefore serve as a useful measurement for detecting layup errors. It was shown experimentally that this shear waves for detecting the presence of the errors is very sensitive. It is found that high probability shows between tests and the model developed in characterizing cured layups of the laminates. Also a C-scan method was used for detecting layup of the laminates because of extracting fiber orientation information from the ultrasonic reflection caused by structural imperfections in the laminates. Therefore, it was found that interface C-scan images show the fiber orientation information by using two-dimensional fast Fourier transform(2-D FFT).