• 제목/요약/키워드: Acoustic Emission

검색결과 1,110건 처리시간 0.048초

수리자극에 의한 지열저류층에서의 유도지진과 단층대의 변형에 관한 입자기반 개별요소법 모델링 연구 (Particle Based Discrete Element Modeling of Hydraulic Stimulation of Geothermal Reservoirs, Induced Seismicity and Fault Zone Deformation)

  • 윤정석;아미르 하킴하쉐미;아노 짱;귄터 찜머만
    • 터널과지하공간
    • /
    • 제23권6호
    • /
    • pp.493-505
    • /
    • 2013
  • 본 수치해석논문에서는 절리와 단층대를 포함한 지열저류층에 수리자극을 가할 시 수반되는 유도지진과 단층대의 변형을 개별요소법을 사용하여 모델링하였다. 수채해석기법은 2차원 입자유동코드를 기반으로 하며 수리역학적 상호작용기법과 미소파괴음의 모멘트텐서 역산알고리즘이 결합되었다. 수치해석의 주요결과로는 시공간적으로 변하는 유도지진의 분포와 규모 그리고 단층대의 변형(파괴 및 전단변위)과 주입유체압력의 시공간적 분포와의 상관관계이다. 첫 번째 수치해석으로부터 절리가 분포하는 지열저류층에서의 수리자극에 의한 유도지진의 분포는 주입유체의 점성에 상당한 영향을 받는 것으로 나타났다. 주입유체의 점성이 낮은 경우 (1 cP), 유도지진의 발생범위가 큰 것으로 나타났으며, 주입 후 발생하는 유도지진의 개수와 규모 또한 높게 나타났다. 단층대가 존재하는 지열저류층의 수리자극 모델링의 결과, 주입정의 위치가 단층대와 가까운 경우 작은 주입수 압력분포(<0.1 MPa)로도 단층대의 파괴와 전단변형을 일으킬 수 있는 것으로 나타났다. 본 논문에서 소개한 수치해석기법은 수리자극을 통한 지열저류층 개발 시 유도지진의 분포와 규모를 실제 유체주입작업전에 예측할 수 있게 함으로써 지열에너지개발 분야에서 유용하게 사용될 수 있을 것으로 기대한다.

황등화강암을 이용한 암석의 손상기준 결정방법 연구 (The Optimal Method to Determine Damage Threshold of Rock using Hwangdeung Granite)

  • 장보안;지훈;장현식
    • 지질공학
    • /
    • 제20권1호
    • /
    • pp.89-100
    • /
    • 2010
  • 암석의 손상상태를 평가하기위한 여러 방법들이 제안되어 있으나, 일부의 방법은 명확한 손상기준을 제시하기도 하지만 일부의 방법은 매우 모호하여 분석자의 주관에 따라 값이 달라지기도 한다. 그러므로 이 연구에서는 황등화강암을 대상으로 현재까지 제안된 모든 손상기준 결정방법을 적용하여, 각 방법의 적용성, 오차 및 최적의 손상기준결정 방법 등을 연구하였다. 또한 암석의 균열발달 및 파괴특성의 규명에 가장 중요한 손상기준인 균열개시응력과 균열손상응력을 FSR 및 장기 정하중 시험을 이용하여 검정하였다. 황등화강암의 균열닫힘응력과 균열개시응력은 각각 57.5 MPa, 77.6 MPa이며 균열체적변형률에서 측정하는 것이 가장 정확한 것으로 판단된다. 2차 균열개시응력은 90.6 MPa로 측정되었으며, 미소파괴음 계수 및 계수율이 균열개시응력의 측정에 가장 효과적인 것으로 판단된다. 균열결합응력 측정은 체적강성곡선, 미소파괴음 계수 및 미소파괴음 계수율이 가장 효과적인 방법으로 판단되며, 균열결합응력은 110.3 MPa이다. 균열손상응력은 체적강성곡선 및 미소파괴음 계수율에서 가장 명확히 측정되며, 약 127.5 MPa이다. 일축압축강도에 대한 비로서 나타낸 균열개시응력은 0.47로 FSR 값 0.46과 매우 유사하며, 균열손상응력은 0.77로 장기 정하중 시험을 통하여 측정된 장기 강도비 0.75~0.8과 거의 일치하여 균열개시응력 및 균열손상응력 값이 정확함을 검정하였다.

응력확대계수와 음향방출 변수를 이용한 피로균열 거동 연구 (Study on the Fatigue Crack Behavior by the Stress Intensity Factor and AE Parameters)

  • 윤동진;정중채;박휘립;김기복;이승석
    • 비파괴검사학회지
    • /
    • 제20권5호
    • /
    • pp.412-423
    • /
    • 2000
  • 응력확대계수와 음향방출 발생 관계를 이용해 균열 길이 및 균열 검출 능력을 평가할 수 있는 새로운 접근 방법을 파괴역학적인 관점에서 제시하였다. 이를 위해 강 교량 부재인 SWS 490B 강의 피로 균열 활동도를 음향방출 시험을 통해 관찰하였다. 표준 CT 시편에 대한 피로균열 진전 시 AE 특성을 관찰하는 실험을 진행하였으며, 기존의 AE 파라미터 분석은 물론 응력확대계수와 AE 발생거동 사이의 관계를 논의하였다. CT 시편 실험 결과에서 균열 성장 길이, AE 최대진폭, AE 에너지, AE hit 발생율 등과 같은 특정 변수들은 응력확대계수 값이 증가함에 따라 이들 값도 증가하는 경향을 나타내었다. 또한 피로사이클 수에 따른 AE 에너지의 변화는 균열진전에 대한 활동성을 평가하는데 사용되는 효과적인 변수중의 하나임을 보여 주었으며, AE 에너지 분석은 균열 활동도와 AE 변수 사이의 관계를 평가하는데 사용될 수 있을 것으로 판단된다.

  • PDF

취성파괴수준과 파괴개시시점에 관한 진삼축 모형실험연구 (True Triaxial Physical Model Experiment on Brittle Failure Grade and Failure Initiation Stress)

  • 천대성;박찬;박철환;전석원
    • 터널과지하공간
    • /
    • 제17권2호
    • /
    • pp.128-138
    • /
    • 2007
  • 상대적으로 저심도에 건설되는 암반구조물의 경우 단층이나 절리 등 암반 내 존재하는 불연속면이 굴착 후 생성된 경계면과의 교차에 의해 구조적인 형태의 파괴가 지배적으로 발생하나, 고심도에 건설되는 경우 높은 현지응력과 굴착에 따른 유도응력으로 인해 공동 경계면에서 스폴링이나 슬래빙과 같은 취성파괴가 발생할 수 있다. 취성파괴는 암반구조물의 안정성을 약화시키는 주된 원인으로, 고심도 영역에서 암반구조물의 안정성을 확보하기 위하여 응력조건에 따라 발생하는 취성파괴의 개시시점, 파괴수준 및 파괴범위 등과 같은 파괴특성이 규명되어야 한다. 본 연구에서는 고심도의 암반구조물에서 발생할 수 있는 취성파괴의 파괴수준 및 개시시점과 재하응력사이의 관계를 정량적으로 평가하고자 진삼축 응력조건을 구현할 수 있는 모형실험장치를 설계, 제작하여 여러 응력조건에서 모형실험을 수행하였다. 공동주변에서 발생한 파괴수준을 육안관찰과 미소파괴음 발생양상에 의해 3단계로 구분하고, 진삼축 응력조건에 따라 제시하였다. 그 결과 파괴수준은 공동단면에 작용하는 재하응력$(S_v,\;S_{H2})$ 뿐 아니라 공동 축에 평행한 재하응력 $S_{H1}$에 영향을 받으며, $S_{H1}$$S_{H2}$의 크기가 증가할수록 동일한 $S_v$에서 파괴수준은 감소하였다. 파괴개시점 역시 $S_{H1}$$S_{H2}$의 증가에 따라 파괴개시를 위한 응력수준은 증가하였으며, 다중회귀분석을 통해 파괴개시시점과 진삼축 응력조건의 관계식을 도출하였다.

주성분 회귀분석 및 인공신경망을 이용한 AE변수와 응력확대계수와의 상관관계 해석 (Analysis on Correlation between AE Parameters and Stress Intensity Factor using Principal Component Regression and Artificial Neural Network)

  • 김기복;윤동진;정중채;박휘립;이승석
    • 비파괴검사학회지
    • /
    • 제21권1호
    • /
    • pp.80-90
    • /
    • 2001
  • AE 신호와 재료의 기계적 물성과의 관계를 정량적으로 제시할 수 있는 방법을 개발하였다. 재료의 여러 가지 기계적 성질들 중 피로균열 거동에 관련된 응력확대계수를 중심으로 AE 신호와 같은 다변량 데이터의 처리에 많이 사용되고 있는 주성분 회귀분석과 비선형적 문제 해결에 적합한 신경회로망 기법을 이용하였다. 이를 위하여 강교량 부재인 SWS490B 강에 대한 피로균열전파 실험을 수행하였으며 표준 CT 시편에 대한 피로균열진전 시 발생하는 AE 신호의 각 변수와 응력확대계수와의 관계를 고찰하였다. 통계분석 방법인 변수선택법을 적용한 결과 AE 카운트(RC), 에너지(EN), 신호지속시간(ED)의 각각에 대한 유의성이 높은 것으로 나타났으나 전반적으로 전체 AE 변수를 모두 이용할 경우 통계적 유의성이 높은 것으로 나타났다. 부재의 반복하중 시 발생하는 피로균열진전을 정량적으로 도출할 수 있는 응력확대계수 추정모델을 개발하고 평가하였다. 미지 시료에 대하여 개발된 모델의 응력확대계수 예측 성능을 분석한 결과 주성분 회귀모델과 인공신경망 모델 모두 우수한 예측성능을 나타내었으나 전반적으로 인공신경망 모델이 주성분 회귀모델보다 다소 양호한 것으로 분석되었다.

  • PDF

Analysis of the crack propagation rules and regional damage characteristics of rock specimens

  • Li, Yangyang;Xu, Yadong;Zhang, Shichuan;Fan, Jing;Du, Guobin;Su, Lu;Fu, Guangsheng
    • Geomechanics and Engineering
    • /
    • 제24권3호
    • /
    • pp.215-226
    • /
    • 2021
  • To study the evolution mechanism of cracks in rocks with multiple defects, rock-like samples with multiple defects, such as strip-shaped through-going cracks and cavity groups, are used, and the crack propagation law and changes in AE (acoustic emission) and strain of cavity groups under different inclination angles are studied. According to the test results, an increase in the cavity group inclination angle can facilitate the initial damage degree of the rock and weaken the crack initiation stress; the initial crack initiation direction is approximately 90°, and the extension angle is approximately 75~90° from the strip-shaped through-going cracks; thus, the relationship between crack development and cavity group initiation strengthens. The specific performance is as follows: when the initiation angle is 30°, the cracks between the cavities in the cavity group develop relatively independently along the parallel direction of the external load; when the angle is 75°, the cracks between the cavities in the cavity group can interpenetrate, and slip can occur along the inclination of the cavity group under the action of the shear mechanism rupture. With the increase in the inclination angle of the cavity group, the AE energy fluctuation frequency at the peak stress increases, and the stress drop is obvious. The larger the cavity group inclination angle is, the more obvious the energy accumulation and the more severe the rock damage; when the cavity group angle is 30° or 75°, the peak strain of the local area below the strip-shaped through-going fracture plane is approximately three times that when the cavity group angle is 45° and 60°, indicating that cracks are easily generated in the local area monitored by the strain gauge at this angle, and the further development of the cracks weakens the strength of the rock, thereby increasing the probability of major engineering quality damage. The research results will have important reference value for hazard prevention in underground engineering projects through rock with natural and artificial defects, including tunnels and air-raid shelters.

The Future of NVH Research - A Challenge by New Powertrains

  • Genuit, Ing. K.
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2010년도 춘계학술대회 논문집
    • /
    • pp.48-48
    • /
    • 2010
  • Sound quality and NVH-issues(Noise, Vibration and Harshness) of vehicles has become very important for car manufacturers. It is interpreted as among the most relevant factors regarding perceived product quality, and is important in gaining market advantage. The general sound quality of vehicles was gradually improved over the years. However, today the development cycles in the automotive industry are constantly reduced to meet the customers' demands and to react quickly to market needs. In addition, new drive and fuel concepts, tightened ecological specifications, increase of vehicle classes and increasing diversification(increasing market for niche vehicles), etc. challenge the acoustic engineers trying to develop a pleasant, adequate, harmonious passenger cabin sound. Another aspect concerns the general pressure for reducing emission and fuel consumption, which lead to vehicle weight reductions through material changes also resulting in new noise and vibration conflicts. Furthermore, in the context of alternative powertrains and engine concepts, the new objective is to detect and implement the vehicle sound, tailored to suit the auditory expectations and needs of the target group. New questions must be answered: What are appropriate sounds for hybrid or electric vehicles? How are new vehicle sounds perceived and judged? How can customer-oriented, client-specific target sounds be determined? Which sounds are needed to fulfil the driving task, and so on? Thus, advanced methods and tools are necessary which cope with the increasing complexity of NVH-problems and conflicts and at the same time which cope with the growing expectations regarding the acoustical comfort. Moreover, it is exceedingly important to have already detailed and reliable information about NVH-issues in early design phases to guarantee high quality standards. This requires the use of sophisticated simulation techniques, which allow for the virtual construction and testing of subsystems and/or the whole car in early development stages. The virtual, testing is very important especially with respect to alternative drive concepts(hybrid cars, electric cars, hydrogen fuel cell cars), where complete new NVH-problems and challenges occur which have to be adequately managed right from the beginning. In this context, it is important to mention that the challenge is that all noise contributions from different sources lead to a harmonious, well-balanced overall sound. The optimization of single sources alone does not automatically result in an ideal overall vehicle sound. The paper highlights modern and innovative NVH measurement technologies as well as presents solutions of recent NVH tasks and challenges. Furthermore, future prospects and developments in the field of automotive acoustics are considered and discussed.

  • PDF

Simulation of the effect of inclusions length and angle on the failure behavior of concrete structure under 3D compressive test: Experimental test and numerical simulation

  • Mohammad Saeed, Amini;Vahab, Sarfarazi;Kaveh, Asgari;Xiao, Wang;Mojtaba Moheb, Hoori
    • Steel and Composite Structures
    • /
    • 제46권1호
    • /
    • pp.53-73
    • /
    • 2023
  • Man-made structure materials like concrete usually contain inclusions. These inclusions affect the mechanical properties of concrete. In this investigation, the influence of inclusion length and inclination angle on three-dimensional failure mechanism of concrete under uniaxial compression were performed using experimental test and numerical simulation. Approach of acoustic emission were jointly used to analyze the damage and fracture process. Besides, by combining the stress-strain behavior, quantitative determination of the thresholds of crack stress were done. concrete specimens with dimensions of 120 mm × 150 mm × 100 mm were provided. One and two holes filled by gypsum are incorporated in concrete samples. To build the inclusion, firstly cylinder steel tube was pre-inserting into the concrete and removing them after the initial hardening of the specimen. Secondly, the gypsum was poured into the holes. Tensile strengths of concrete and gypsum were 2.45 MPa and 1.5 MPa, respectively. The angle bertween inclusions and axial loadind ary from 0 to 90 with increases of 30. The length of inclusion vary from 25 mm to 100 mm with increases of 25 mm. Diameter of the hole was 20 mm. Entirely 20 various models were examined under uniaxial test. Simultaneous with experimental tests, numerical simulation (Particle flow code in two dimension) were carried out on the numerical models containing the inclusions. The numerical model were calibrated firstly by experimental outputs and then failure behavior of models containing inclusions have been investigated. The angle bertween inclusions and axial loadind vary from 0 to 90 with increases of 15. The length of inclusion vary from 25 mm to 100 mm with increases of 25 mm. Entirely 32 various models were examined under uniaxial test. Loading rate was 0.05 mm/sec. The results indicated that when inclusion has occupied 100% of sample thickness, two tensile cracks originated from boundaries of sample and spread parallel to the loading direction until being integrated together. When inclusion has occupied 75% of sample thickness, four tensile cracks originated from boundaries of sample and spread parallel to the loading direction until being integrated together. When inclusions have occupied 50% and 25% of sample thickness, four tensile cracks originated from boundaries of sample and spread parallel to the loading direction until being integrated together. Also the inclusion was failed by one tensile crack. The compressive strength of samples decease with the decreases of the inclusions length, and inclusion angle had some effects on that. Failure of concrete is mostly due to the tensile crack. The behavior of crack, was affected by the inclusion length and inclusion number.

THE CURRENT STATUS OF BIOMEDICAL ENGINEERING IN THE USA

  • Webster, John G.
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1992년도 춘계학술대회
    • /
    • pp.27-47
    • /
    • 1992
  • Engineers have developed new instruments that aid in diagnosis and therapy Ultrasonic imaging has provided a nondamaging method of imaging internal organs. A complex transducer emits ultrasonic waves at many angles and reconstructs a map of internal anatomy and also velocities of blood in vessels. Fast computed tomography permits reconstruction of the 3-dimensional anatomy and perfusion of the heart at 20-Hz rates. Positron emission tomography uses certain isotopes that produce positrons that react with electrons to simultaneously emit two gamma rays in opposite directions. It locates the region of origin by using a ring of discrete scintillation detectors, each in electronic coincidence with an opposing detector. In magnetic resonance imaging, the patient is placed in a very strong magnetic field. The precessing of the hydrogen atoms is perturbed by an interrogating field to yield two-dimensional images of soft tissue having exceptional clarity. As an alternative to radiology image processing, film archiving, and retrieval, picture archiving and communication systems (PACS) are being implemented. Images from computed radiography, magnetic resonance imaging (MRI), nuclear medicine, and ultrasound are digitized, transmitted, and stored in computers for retrieval at distributed work stations. In electrical impedance tomography, electrodes are placed around the thorax. 50-kHz current is injected between two electrodes and voltages are measured on all other electrodes. A computer processes the data to yield an image of the resistivity of a 2-dimensional slice of the thorax. During fetal monitoring, a corkscrew electrode is screwed into the fetal scalp to measure the fetal electrocardiogram. Correlations with uterine contractions yield information on the status of the fetus during delivery To measure cardiac output by thermodilution, cold saline is injected into the right atrium. A thermistor in the right pulmonary artery yields temperature measurements, from which we can calculate cardiac output. In impedance cardiography, we measure the changes in electrical impedance as the heart ejects blood into the arteries. Motion artifacts are large, so signal averaging is useful during monitoring. An intraarterial blood gas monitoring system permits monitoring in real time. Light is sent down optical fibers inserted into the radial artery, where it is absorbed by dyes, which reemit the light at a different wavelength. The emitted light travels up optical fibers where an external instrument determines O2, CO2, and pH. Therapeutic devices include the electrosurgical unit. A high-frequency electric arc is drawn between the knife and the tissue. The arc cuts and the heat coagulates, thus preventing blood loss. Hyperthermia has demonstrated antitumor effects in patients in whom all conventional modes of therapy have failed. Methods of raising tumor temperature include focused ultrasound, radio-frequency power through needles, or microwaves. When the heart stops pumping, we use the defibrillator to restore normal pumping. A brief, high-current pulse through the heart synchronizes all cardiac fibers to restore normal rhythm. When the cardiac rhythm is too slow, we implant the cardiac pacemaker. An electrode within the heart stimulates the cardiac muscle to contract at the normal rate. When the cardiac valves are narrowed or leak, we implant an artificial valve. Silicone rubber and Teflon are used for biocompatibility. Artificial hearts powered by pneumatic hoses have been implanted in humans. However, the quality of life gradually degrades, and death ensues. When kidney stones develop, lithotripsy is used. A spark creates a pressure wave, which is focused on the stone and fragments it. The pieces pass out normally. When kidneys fail, the blood is cleansed during hemodialysis. Urea passes through a porous membrane to a dialysate bath to lower its concentration in the blood. The blind are able to read by scanning the Optacon with their fingertips. A camera scans letters and converts them to an array of vibrating pins. The deaf are able to hear using a cochlear implant. A microphone detects sound and divides it into frequency bands. 22 electrodes within the cochlea stimulate the acoustic the acoustic nerve to provide sound patterns. For those who have lost muscle function in the limbs, researchers are implanting electrodes to stimulate the muscle. Sensors in the legs and arms feed back signals to a computer that coordinates the stimulators to provide limb motion. For those with high spinal cord injury, a puff and sip switch can control a computer and permit the disabled person operate the computer and communicate with the outside world.

  • PDF

유도초음파를 이용한 강관보강다단 그라우팅의 건전도 평가 (Integrity evaluation of grouting in umbrella arch methods by using guided ultrasonic waves)

  • 홍영호;유정동;변용훈;장현익;유병철;이종섭
    • 한국터널지하공간학회 논문집
    • /
    • 제15권3호
    • /
    • pp.187-199
    • /
    • 2013
  • 강관보강다단 그라우팅은 터널공사에 널리 적용되는 공법으로, 터널지반의 안정성 증대 및 차수효과를 얻을 수 있다. 본 연구의 목적은 유도초음파를 이용한 강관보강다단 그라우팅의 건전도 평가 기법을 제시하고, 현장 적용성을 평가하는 것이다. 강관의 그라우팅 충진률에 따른 주파수 변화를 파악하기 위해 실내실험 (자유구속조건 및 지중근입조건)을 수행하였으며, 건전도 평가시스템의 현장 적용성을 검증하기 위해 현장실험을 수행하였다. 강관의 두부를 해머로 타격하여 유도초음파가 발생되며, 발생된 유도초음파는 선단에서 반사되어 두부로 되돌아 온다. 반사된 유도초음파는 두부에 설치된 AE센서에 의해 수신된다. 강관보강다단 그라우팅의 건전도 평가 모델은 충진률 25 %, 50 %, 75 %, 100 %로 제작되었으며, 자유구속조건 및 지중근입조건의 실내실험으로 수행되었다. 신호처리를 위해 고속 푸리에 변환과 웨이브렛 변환을 수행하였다. 실내실험 결과, 유도초음파의 전파속도 변화는 크지 않았으나, 그라우팅 충진률에 따른 주 주파수의 변화가 뚜렷하게 나타났다. 강관보강다단 그라우팅의 충진률이 증가할수록 반사파의 주 주파수의 크기가 감소했다. 현장실험은 이미 설치된 강관보강다단 그라우팅에 대해 수행되었으며, 실내실험과 동일한 기법으로 분석하였다. 현장 조건의 실험체에서도 유도초음파의 반사파를 쉽게 수집할 수 있었으며, 이에 대한 주파수 영역에 대한 분석도 가능했다. 본 연구의 결과는 유도초음파를 이용한 주파수 분석 기법은 강관보강다단 그라우팅 건전도 평가에 효과적인 방법이 될 수 있음을 보여준다.