• The Korean Journal of Ecology
• /
• v.17 no.1
• /
• pp.69-78
• /
• 1994

The acidic deposition (wet) was collected at three different locations; representative industrial (Kun-Jang industrial areas), semiindustrial (Kunsan City) and nonindustrial (Daeya areas) region between March, 1991 and June, 1993. Samples were analyzed for major chemical components along with pH. Also the responses of Hypnum filunzaeforme to the acidic deposition adjusted to pH 4.6, 3.6 and 2.6 with 1:4 molar ratio of nitric to sulfuric acid were investigated. Seasonal variation of pH showed the lowest in early spring and the highest in summer. The annual mean concentrations of $S0_4^{2-},\;NO_3^{-}\;and\;NH_4^{+}$ were 2.94 (81.0%), 0.48 (13.2%) and 0.21 (5.78%) mg/l in industrial region and 0.61 (64.21%), 0.25 (26.3%) and 0.9 (9.5%) mg /I in nonindustrial region, respectively. $S0_4^{2-}$ contents of industrial region was 4 times higher than those of nonindustrial region. The ratio of $S0_4^{2-}\;to\;NO_3^{-}$ was 4.75~7.35 in industrial region and 0.69-6.36 in nonindustrial region. The acidic deposition near industrial region was associated with excess ions, expecially $S0_4^{2-}$. Nitrate reductase activity(NRA) of mosses was inhibited by acidic deposition in both regions. The time required for the maximum NRA induction by 2mM $KNO_3$ was shortened in mosses collected from industrial region. Photosynthesis of H. plumaejorme began to decrease with acidic deposition by pH below 4.6, and was completely inhibited at pH 2.6 in both regions. Water potential of mosses treated with acidic deposition was almost constant during 18 days, however after withholding the supply of acidic deposition, it was rapidly decreased.

• The Journal of the Petrological Society of Korea
• /
• v.14 no.3 s.41
• /
• pp.169-179
• /
• 2005

Acidic metavolcanic rocks distributed around the Chungju iron deposit show significantly high abundances of rare earth elements and high field strength elements. Relatively high ${\epsilon}_{Nd}$(0) values and lack of negative Nb anomaly suggest that assimilation of crustal material is not involved in their generation. They are plotted within the within-plate environment according the tectonic discrimination diagrams. Such geochemical characteristics are very similar to the acidic metavolcanic rocks of Munjuri Formation. They also show geochemical characteristics of Al-type magma of Eby (1992). All such diagnostic characters indicate differentiation of mantle-derived magma produced from the rift environment, related to the breakup of continent. In contrast to the alkali granites and the rare metal deposit both having age of c. 330 Ma, Sm-Nd isotopic data of the acidic metavolcanic rocks do not form well defined isochron. However, the alkali granites reveal low ${\epsilon}_{Nd}$(0) values, while the acidic metavolcanic rocks and the rare metal deposit both have significantly higher ${\epsilon}_{Nd}$(0) values. Considering such differences, we propose following generation hypothesis: The acidic metavolcanic rocks around Chungju iron deposit was erupted at 750 Ma as rest of the acidic metavolcanic rocks of Gyemyeongsan and Munjuri Formations. About 330 Ma ago, partial melting of existing Al-type igneous materials and some old crustal materials produced alkali granite. The rare metal deposit was also produced by redistribution of related materials within the acidic volcanics due to hydrothermal activities occurred at the same time. Sm-Nd isotopic systematics of the acidic metavolcanic rocks were disturbed during the regional metamorphic event at ca. 280 Ma.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.1
• /
• pp.57-63
• /
• 2015

Bioavailability of cadmium (Cd) and arsenic (As) can be different depending on soil pH. For this reason, main purpose of this research was to compare bioavailability of Cd and As in agricultural field under varied soil pH and different extractants. Bioavailable fraction of Cd and As in soil was extracted with $CaCl_2$, $NaNO_3$, DTPA, EDTA, and low molecular weight organic acids (LMWOAs). Soil samples and cultivated crops were collected at the range of soil pH 4.5-8.5 and correlation analysis was conducted between bioavailable fraction of Cd and As in soil and total concentration of Cd and As in crops. Results showed that concentration of Cd and As in acidic soil was ranged $0.002-0.462mg\;kg^{-1}$ and $0.041-4.903mg\;kg^{-1}$ respectively. In alkaline condition, concentration of Cd and As were ranged $0.006-0.351mg\;kg^{-1}$ and $0.039-2.807mg\;kg^{-1}$ respectively. Comparing bioavailable fraction of Cd and As in acidic and alkaline soil condition, higher concentration was measured in acidic condition. Similarly, higher average concentration of Cd and Asin crops was observed in acidic condition (0.398 and $0.751mg\;kg^{-1}$ respectively) than alkaline condition (0.248 and $0.264mg\;kg^{-1}$). Among different extractants, LMWOAs method showed higher correlation ($r^2=0.545$) for Cd in acidic condition indicating that LMWOAs method could be applied for evaluating bioavailability of Cd in acidic soil. However, no high correlation was observed for As in both acidic and alkaline condition. Overall, bioavailable fraction of Cd and As can be higher in acidic condition of soil than alkaline condition resulting higher uptake of Cd and As from soil to crops. Therefore, efficient best management practice (BMPs) for Cd and As in acidic soil should be conducted for minimizing uptake of Cd and As into crops.

• Corrosion Science and Technology
• /
• v.4 no.6
• /
• pp.242-249
• /
• 2005

A lot of parts in FGD (Flue Gas Desulfurization) systems of fossil-fuel power plants show the environments in which are highly changeable and extremely acidic corrosive medium according to time and locations, e.g. in duct works, coolers and re-heaters etc. These conditions are formed when system materials are immersed in fluid that flows on them or when exhausted gas is condensed into thin layered acidic medium to contact materials of the system walls and roofs. These environments make troublesome corrosion and air pollution problems that are occurred from the leakage of the condensed solution. To cathodically protect the metallic structures in extremely acidic fluid, the properties of the protective coatings on the metal surface were very important, and epoxy Novolac coating was applied in this work. On the base of acid immersion tests, hot sulfuric acid decreased the hardness of the coatings and reduced greatly the content of $Na_2O$, $Al_2O_3$, and $SiO_2$ among the main components of the coating. A special kind of CP(Cathodic Protection) system has been developed and tested in a real scale of the FGD facility. Applied coating for this CP system was peeled off and cracked in some parts of the facility. However, the exposed metal surface to extremely acidic fluid by the failure of the coatings was successfully protected by the new CP system.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.4
• /
• pp.61-65
• /
• 2007

In this research, we have developed a manufacturing process for seawater salt by horizontal spray drying technique using the deep ocean water and seaweed(sea tangle). Deep ocean water, strong acidic electrolyzed water and strong alkaline electrolyzed water were used as extraction solvent of seaweed. Sodium content in seaweed extract solution by strong alkaline electrolyzed water was 1.63(mg/g), which was 3.5 times lower than of seaweed extract by strong acidic electrolyzed water. Major mineral content(Na, K, Ca) in seawater salt by deep ocean water were higher than strong acidic electrolyzed water and strong alkaline electrolyzed water. On the contrary, Mg contents in seawater salt by deep ocean water were lower than strong acidic electrolyzed water and strong alkaline electrolyzed water. Based on the results of seawater salt production using seaweed, it is possible to make law-salt efficiently.

• Carbon letters
• /
• v.14 no.1
• /
• pp.34-39
• /
• 2013

Acrylonitrile (AN)-acrylamide (AM) copolymers were prepared by nitric acidic hydrolysis of homopolyacrylonitrile. The acrylamino group increased as a function of hydrolysis time, while crystallinity decreased. Differential scanning calorimetry and a thermal gravimetric analysis indicated that the acylamino introduced by acidic hydrolysis effectively enhanced the cyclization reaction at low temperature due to the change of the cyclization reaction mechanism. Char-yield of AN-AM copolymers also gradually increased with increasing hydrolysis time. The maximum char-yield was 49.48% when hydrolized at $23^{\circ}C$ in 65% nitric acid solution for 18 h, which was 30% higher than that of non-acidic hydrolysis of homopolyacrylonitrile. Simulation of the practical process also showed an increase of char yields, where the char yields were 55.43% and 62.60% for homopolyacrylonitrile and copolyacrylonitrile, respectively, with a hydrolysis time of 13 h.

• Korean Journal of Pharmacognosy
• /
• v.50 no.4
• /
• pp.305-311
• /
• 2019

The purpose of this study was to examine the changes in seasonal bioactive components of 4 and 6 years old fresh ginseng (Panax ginseng) and to provide basic information on the development of functional food using fresh ginseng. Seasonal changes were investigated by ginseng saponin analysis using HPLC method and acidic polysaccharides by carbazole sulfuric acid method. Total saponins showed the highest content of fresh ginseng collected in May, followed by March, July, and September. Fresh ginseng collected in May showed 2.5 times (4 years old) - 3.0 times (6 years old) higher than fresh ginseng collected in September. Acidic polysaccharides showed high content of fresh ginseng collected in March and September, and low content of fresh ginseng collected in May and July. From these results, the fresh ginseng collected in May can develop high concentrations of saponin. On the other hand, fresh ginseng collected in March and September is thought to be able to develop high concentration products of acidic polysaccharides.

• Carbon letters
• /
• v.6 no.1
• /
• pp.25-30
• /
• 2005

The electrosorption of U(VI) from waste water was carried out by using an activated carbon fiber (ACF) felt electrode in a continuous electrosorption cell. In order to enhance the electrosorption capacity at a lower potential, the ACF was electrochemically modified in an acidic and a basic solution. Pore structure and functional groups of the electrochemically modified ACF were examined, and the effects of the modification conditions were studied for the adsorption of U(VI). Specific surface area of all the ACFs was decreased by this modification. The amount of the acidic functional groups decreased with a basic modification, while the amount increased a lot with an acidic modification. The electrosorption capacity of U(VI) decreased on the acid modified electrode due to the shielding effect of the acidic functional groups. The base modified electrode enhanced the capacity due to a reduction of the acidic functional groups. The electrosorption amount of U(VI) on the base modified electrode at .0.3 V corresponds to that of the as-received ACF electrode at .0.9 V. Such a good adsorption capacity was due to a reduction of the shielding effect and an increase of the hydroxyl ions in the electric double layer on the ACF surface by the application of negative potential.

• Journal of Ginseng Research
• /
• v.37 no.2
• /
• pp.219-226
• /
• 2013

This study was conducted to investigate the effect of extrusion conditions (moisture content 20% and 30%, screw speed 200 and 250 rpm, barrel temperature $115^{\circ}C$ and $130^{\circ}C$) on the acidic polysaccharide, ginsenoside contents and antioxidant properties of extruded Korean red ginseng (KRG). Extruded KRGs showed relatively higher amounts of acidic polysaccharide (6.80% to 9.34%) than non-extruded KRG (4.34%). Increased barrel temperature and screw speed significantly increased the content of acidic polysaccharide. The major ginsenosides (Rb1, Rb2, Rc, Rd, Re, Rf, Rg2s, Rg3s, Rh1, and Rg3r) of KRG increased through extrusion, while the ginsenoside (Rg1) decreased. The EX8 (moisture 30%, screw speed 250 rpm, and temperature $130^{\circ}C$) had more total phenolics and had a better scavenging effect on 2,2-diphenyl-1-picrylhydrazyl radicals than those of extruded KRG samples. The extrusion cooking showed a significant increase (6.8% to 20.9%) in reducing power. Increased barrel temperature significantly increased the values of reducing power, the highest value was 1.152 obtained from EX4 (feed moisture 20%, screw speed 250 rpm, and temperature $130^{\circ}C$). These results suggest that extrusion conditions can be optimized to retain the health promoting compounds in KRG products.

• Journal of Environmental Science International
• /
• v.11 no.3
• /
• pp.263-269
• /
• 2002

This study was conducted to know the removal characteristics of ammonia nitrogen by commercially available cation exchange resins. Eight acidic cation exchange resins were investigated in batch reactors. Among them, the most effective resin for ammonia removal in solution was PK228, which was a strong acidic resin of $Na^{+}$ type. PK228 was compared with activated carbon and natural zeolite. The effects of cation exchange capacity, ammonia concentration, resin amount, temperature and pH on ammonia removal by PK228 were investigated in batch reactor, and the effect of effluent velocity in continuous column reactor. Strong acidic resins of porous type were more effective than week acidic resins or gel type resins for ammonia removal in solution. PK228 was more effective than activated carbon and natural zeolite for ammonia removal in batch reactor. With increasing initial ammonia concentration, the amount of ammonia removed by PK228 increased, but the proportion of removed ammonia to initial ammonia concentration decreased. The effect or temperature on ammonia removal by PK228 was very slight. The ammonia removal to acidic solution was more effective than that at basic solution. With decreasing effluent velocity of solution through column, breakthrough point extended, and ammonia removal capacity increased.d.