• 한국지반공학회논문집
• /
• 제36권8호
• /
• pp.27-34
• /
• 2020

터널시공 현장에서는 콘크리트와 숏크리트 및 각종 그라우팅 공법의 사용으로 다량의 알칼리성 폐수가 발생되고 있으며 하천오염을 방지하기 위해 중성화 처리를 해서 방류해야 한다. 현재는 이를 황산과 같은 강산으로 중화 처리하고 있으나 취급상의 위험이 내재 되어있다. 그 대안으로 이산화탄소(CO₂) 사용이 부각되었고 다양한 실내실험 연구가 진행되어 그 가능성이 입증되고 있다. 하지만 아직 CO₂의 현장 적용연구가 절대 부족하고 특히 건설현장에서는 실내 실험 결과와는 다른 특성을 보이고 있기 때문에 현장 적용이 어려운 실정이다. 이에 본 연구에서는 현장 실험을 통하여 실제 현장 적용 가능성을 검증하고자 한다.

• 한국건축시공학회지
• /
• 제12권5호
• /
• pp.490-502
• /
• 2012

The use of recycled aggregate, even for low-performance concrete, has been very limited because recycled aggregate, which contains a large amount of old mortar, is very low in quality. To produce a high-quality recycled aggregate, removing the paste that adheres to the recycled aggregate is very important. We have conducted research on a complex abrasion method, which removes the component of cement paste from recycled fine aggregate by using both a low-speed wet abrasion crusher as a mechanical process and neutralization as chemical processes, and well as research on the optimal manufacturing condition of recycled fine aggregates. Subsequently, we evaluated the quality of recycled fine aggregate manufactured using these methods, and tested the specimen made by this aggregate. As a result, it was found that recycled fine aggregates produced by considering the aforementioned optimal abrasion condition with the use of sulfuric acid as reactant showed excellent quality, recording a dry density of 2.4 and an absorption ratio of 2.94. Furthermore, it was discovered that gypsum, which is a reaction product occurring in the process, did not significantly affect the quality of aggregates. Furthermore, the test of mortar using this aggregate, when gypsum was included as a reaction product, showed no obvious retarding effect. However, the test sample containing gypsum recorded a long-term strength of 25.7MPa, whereas the test sample that did not contain gypsum posted a long-term strength of 29.4MPa. Thus, it is thought to be necessary to conduct additional research into the soundness and durability because it showed a clear reduction of strength.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.259-263
• /
• 2001

There are several steps such as slicing, lapping, chemical etching and mechanical polishing in the silicon wafer production process. The chemical etching step is necessary to remove damaged layer caused In the slicing and lapping steps. The typical etching liquor is the acid mixture comprising nitric acid, acetic acid and hydrofluoric acid. At present, the waste acid is treated by a neutralization method with a high alkali cost and balky solid residue. A solvent extraction method is applicable to separate and recover each acid. Acetic acid is first separated from the waste liquor using 2-ethlyhexyl alcohols as an extractant. Then, nitric acid is recovered using TBP(Tri-butyl phosphate) as an extractant. Finally hydrofluoric acid is separated with the TBP solvent extraction. The expected recovered acids in this process are 2㏖/l acetic acid, 6㏖/1 nitric acid and 6㏖/l hydrofluoric acid. The yields of this process are almost 100% for acetic acid and nitric acid. On the other hand, it is important to recover and reuse the metal values contained in various industrial wastes in a viewpoint of environmental preservation. Most of industrial products are made through the processes to separate impurities in raw materials, solid and liquid wastes being necessarily discharged as industrial wastes. Chemical methods such as solvent extraction, ion exchange and membrane, and physical methods such as heavy media separation, magnetic separation and electrostatic separation are considered as the methods for separation and recovery of the metal values from the wastes. Some examples of the application of solvent extraction to the treatment of wastes such as Ni-Co alloy scrap, Sm-Co alloy scrap, fly ash and flue dust, and liquid wastes such as plating solution, the rinse solution, etching solution and pickling solution are introduced.

• 한국연초학회지
• /
• 제16권2호
• /
• pp.191-197
• /
• 1994

Relationships between surface structure and adsorption properties of smoke components were investigated in surface-modified and un-modified activated carbon filter cigarettes. Commercially available activated carbon was treated with nitric acid and hydrogen peroxide as oxidant, and their pore volume, surface structure, BET surface area, pore type and size were studied. BET surface area and pore volume were decreased by nitric acid treatment, but median pore diameter was 8.1 $\AA$, which showed better development of pore compared with that of un-modified activated carbon, 6.9 $\AA$. In case of hydrogen peroxide treatment, BET surface area and pore volume were increased. Their pore was found to be a slit type based on V-t plot analysis. Neutralization capacities for bases of different strength (NaHCO3, Na2CO3, NaOEt and NaOH) showed that the majority of the acidic surface groups are of weak acidity. Modification of the activated carbon surface led to a slight change in adsorption properties when analyzing the smoke of triple-filter cigarette with surface-modified activated carbon.

• 패션비즈니스
• /
• 제9권2호
• /
• pp.57-70
• /
• 2005

Chitosan pre-treatment of the fabrics prior to the dyeing processes has been reported to increase the uptake of natural dyestuffs. In this study, cotton, nylon, and PET fabric specimens were pre-treated with chitosan prior to the dyeing (Method 1), or the state of chitosan acid salt formation, coated on the yarn surface, was destroyed prior to the dyeing process by alkaline neutralization process (Method 2). In case of the acid salt formed cotton (Method 1), treated fabrics showed more yellowish color component of cochineal, while alkali-treated (Method 2) cotton showed more uptake of bluish color of cochineal.

• Journal of Microbiology and Biotechnology
• /
• 제16권10호
• /
• pp.1513-1517
• /
• 2006

One single lactic acid producing bacterium, isolated from kimchi, inhibited the growth and adherence of Helicobacter pylori to the human gastric epithelial cell line MKN-45. This isolate was identified as Lactobacillus plantarum and termed L. plantarum strain PL9011. The adherence of H pylori, in the presence of live or nonviable L. plantarum strain PL9011 (10-fold CFU), decreased to 14-20%. The spent culture supernatant of L. plantarum strain PL9011 resulted in the eradication of H pylori. This activity remained stable following neutralization and heat treatment, but not following pepsin treatment, thereby suggesting small peptides as the inhibitory factor. L. plantarum strain PL9011 did not produce any harmful metabolites or enzymes. The results obtained in this study suggest that the L. plantarum strain PL9011 may be a potential novel probiotic for the stomach.

• 한국응용과학기술학회지
• /
• 제30권3호
• /
• pp.504-517
• /
• 2013

The purpose of this study was to process extraction and separation for polyglucose porpyran from pophyra yezoensis as high yield. The acidic porphyran solution was extracted with 0.1~1N of ${\alpha},{\beta}$-dichloromaleic acid or ${\alpha}$-chloromaleic acid of 2% solution as organic acid instead of inorganic acid at $60^{\circ}C$ and then porphyran was collection of high yield to acidic solution and it was neutralization treated with 0.1N of $d-Ca(OH)_2$ solution and the mixture was conversion to porphyran salt form and treated with a shell powder of ouster and then added of ethanol as precipitator. It recovery porphyran contained of violet purple laver coloring matter was obtained as a crystalline and used for the next step without future purification to prepare of porphyran laver jam. so, The resulting porphyran and porphyran jam was characterized by it component and physical properties.

• 한국결정성장학회지
• /
• 제8권2호
• /
• pp.343-349
• /
• 1998

$TiCL_4$수용액의 탈수 반응에 있어 pH의 영향에 관하여 연구하였다. KOH와 HCl을 탈수 촉진 및 탈수 지연제로 사용하여 실험한 결과 다음과 같은 결론을 얻었다. $TiCL_4$ 수용액과 KOH와의 반응계에서 중화점은 pH 7.4이었으며 중화점 이전에서는 반응 생성물로 polymetatitanic acid의 중합체인 Ti-gel이 생성되고 중화점 이상에서는 재탈수 반응에 의하여 oligomer화가 일어난다. 또한 결정성 potasium titanate는 존재하지 않는다.

• 한국염색가공학회지
• /
• 제19권4호
• /
• pp.10-17
• /
• 2007

Chitosan(CS) and cellulose acetate(CA) composite films were prepared using formic acid as a cosolvent by casting, solvent evaporating and neutralization method. This study examines if the blending method, which uses formic acid as a cosolvent is efficient in improving the mechanical properties of CS film, especially wet strength and elongation. Formic acid is an effective cosolvent for the blend of CS and CA. Under wet condition, tensile strength and elongation of the composite films were obviously higher than those of the films made from pure CS. FTIR, DSC, and X-ray diffraction showed that the composite films exhibit a high level of compatibility and that strong interaction between the CS and CA was caused by intermolecular hydrogen bonding. The affinity series of composite film to transition metal ions are Cu(II) > Cd(II) > Cr(III). The adsorption of Cu((II) ion was shown to be highly pH sensitive.

• Carbon letters
• /
• 제9권1호
• /
• pp.8-16
• /
• 2008

Oxidized activated carbons were prepared by reacting steam-activated carbon developed from pecan shells with nitric acid of varying strength (15, 30, 45 and 60%). The textural properties and the chemistry of the surface of the non-oxidized and of the oxidized carbons were determined from nitrogen adsorption and base neutralization capacities. The uptake of Pb(II) and Cd(II) from aqueous solution by these carbons was determined by kinetic and equilibrium experiments as well as by the column method. Treatment with nitric acid brought about drastic decrease in surface area and remarkable increase in the pore size of the carbon with these changes depending on the strength of nitric acid. Nitric acid increased the surface acidity by developing new surface oxygen functional groups of acidic nature. $HNO_3$-oxidized carbons exhibited high adsorption capacities for Pb(II) and Cd(II). The adsorption of these ions increased with the decrease of the surface pH of the carbon and with the increase of the solution pH from 2.5 to 6 and 7. The amount adsorbed from lead and cadmium was also related to the amount of surface acidity, the pH of the point of zero charge and on some metal ion parameters. Cadmium and lead uptake by the investigated carbons followed pseudo-second order model and the equilibrium sorption data fitted Langmuir adsorption model.