• Membrane Journal
• /
• v.27 no.1
• /
• pp.68-76
• /
• 2017

Flat membrane with $0.4{\mu}m$ pore size was prepared with PVdF (polyvinylidene fluoride) nanofiber, which has the advantages such as excellent strength, chemical resistance, non-toxicity, and incombustibility. The spiral wound module was manufactured with the flat membrane and a woven paper. Hybrid water treatment process was composed of the PVdF nanofibers spiral wound microfiltration and granular activated carbon (GAC) adsorption column. Effect of GAC packing mass was investigated by comparing the case of recycling or discharging the treated water using the synthetic solution of kaolin and humic acid. After each filtration experiment, water back-washing was performed, and recovery rate and filtration resistances were calculated. Also, effect of GAC adsorption was compared by measuring turbidity and $UV_{254}$ absorbance. As a result, there was no effect of GAC packing mass on turbidity treatment rate; however, the treatment rate of $UV_{254}$ absorbance was 0.7~3.6% for recycling the treated water, and increased to 3.2-5.7% for discharging the treated water. In the case of recycling the treated water, reversible filtration resistance ($R_r$) and irreversible filtration resistance ($R_{ir}$) trended to decrease as increasing GAC packing mass; however, total fitration resistance ($R_t$) was almost constant, and recovery rate of water back-washing trended to increase a little.

• Journal of Adhesion and Interface
• /
• v.12 no.4
• /
• pp.111-116
• /
• 2011

The characteristics of natural resin, sap of the lacquer tree were examined as an adhesive for the ceramic conservation since it has such outstanding properties like corrosion resistance against acid and alkali, heat-resistance, waterproof, antiseptic and protection against insects. In order to utilize raw lacquer as an adhesive not under the hardening conditions of lacquer like high humidity (RH 75 to 85%) and high temperature (120 to $170^{\circ}C$), but under normal condition, isinglass and animal glue were added to raw lacquer at certain ratio. In addition, the viscosity and the drying time were measured and their possibilities of application were also investigated through measurement of tensile and adhesive strength. As a result of experiment, it was possible to dry at room temperature and RH $50{\pm}5%$ to mix with raw lacquer and glue, and the drying time of sample with animal glue was faster than that of isinglass. Furthermore, the adhesion of sample with glue was increased more than raw lacquer. It seems to be possible to use the environmental friendly traditional adhesive for the ceramic conservation and restoration, if there are studies or examinations of safety of applications on objects and weathering resistance.

• Food Science and Preservation
• /
• v.24 no.8
• /
• pp.1053-1059
• /
• 2017

Burdock powder (BP) has shown diverse functional activities; thus, it seems a good way to increase its consumption by incorporating BP into suitable food products such as cookies. Studies were carried out on cookies prepared by incorporating BP (2%, 4%, 6%, and 8%) into wheat flour. The cookie dough and cookies were evaluated for their physical, chemical, and sensory characteristics. The pH and density of cookie doughs ranged from 6.70-6.85 and 1.19-1.21, respectively, with no remarkable differences. Moisture content and spread factor of cookies appeared to increase with higher content of BP in the formulation but did not show significant differences (p>0.05). For color values of cookie surface, $L^*$, $a^*$, and $b^*$-values significantly decreased as a result of BP substitution (p<0.05). The cookies became crispier as indicated by the reduction in the breaking strength value from 26.71 to 17.83 N. 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-bis-3-ethylbenzthiazoline-6-sulphonic acid (ABTS) radical scavenging activities were significantly increased (p<0.05) with higher substitution of BP, and they were well correlated. Hedonic sensory results indicated that cookies supplemented with 2% BP received the most favorable acceptance scores for all sensory attributes evaluated. Overall, cookies with BP could be developed with improved physicochemical qualities as well as consumer acceptability.

• Polymer(Korea)
• /
• v.37 no.4
• /
• pp.518-525
• /
• 2013

To improve the mechanical properties of polypropylene (PP) biocomposites reinforced with sulfuric acidtreated green algae (SGA), SGA/graphite nanoplatelets (GNP)/PP biocomposites were prepared and their properties were evaluated depending on the particle size and content of GNP. The flexural and impact strength of SGA/GNP/PP biocomposites decreased with the addition of GNP, whereas the flexrual and storage moduli were greatly improved with increasing GNP loading. SGA/GNP/PP biocomposites reinforced with GNP5 showed generally better mechanical properties compared to that reinforced with GNP15 mainly due to the improved dispersion of the smaller GNP. SGA/GNP/PP biocomposites reinforced with GNP5 showed a lower resistance to the thermal expansion because the relatively uniform dispersion of smaller GNP was responsible for the effective heat transfer to the polymer matrix. As a result, SGA/GNP/PP biocomposite was acceptable for the general purpose application due to the improved flexural resistance, storage moduli, and damping characteristics.

• Journal of Adhesion and Interface
• /
• v.11 no.3
• /
• pp.120-125
• /
• 2010

UV-curable acrylic Pressure-sensitive adhesives (Acrylic PSAs) are used in many different parts in the world. A wafer manufacture process which is based on semiconductor industry is one thing. We have used acrylic PSAs whose thickness is different from $20{\mu}m$ to $30{\mu}m$ in wafer manufacture process so far. But as wafers become more thinner, acrylic PSAs are supposed to satisfy the requirements such as proper adhesion performance. The main purpose of this research is studying proper adhesion performance and UV-curing behavior of UV-curable acrylic PSAs with very thin thickness and then determining optimized conditions to raise the efficiency of thin wafer production. Acrylic PSAs contain 2-Ethylhexyl Acrylate (2-EHA), Acrylic Acid (AA) and Butyl Acrylate (BA). Ethyl acetate (EtAc) is used as solvent. The acrylic PSAs are obtained using solvent polymerization. Thickness of UV-curable acrylic PSAs is different from $10{\sim}30{\mu}m$. By peel strength and probe tack, adhesion performance and UV curing behavior of acrylic PSA are concerned.

• Membrane Journal
• /
• v.19 no.4
• /
• pp.302-309
• /
• 2009

A block copolymer of polystyrene-b-poly (hydroxyl ethyl methacrylate), PS-b-PHEMA, was synthesized via atom transfer radical polymerization (ATRP) and crosslinked with 4,5-imidazole dicarboxylic acid (IDA) via esterification of the -OH groups of PHEMA in the block copolymer and the -COOH groups of IDA. Upon doping with $H_3PO_4$ to form imidazole-$H_3PO_4$ complexes, the proton conductivity of the membranes continuously increased as the content of $H_3PO_4$ increased. In addition, both the tensile strength and the elongation at break increased with IDA content. A proton conductivity of 0.01 S/cm at $100^{\circ}C$ was obtained for the PS-b-PHEMA/IDA/$H_3PO_4$ membrane with [HEMA]:[IDA]:[$H_3PO_4$] = 3:4:4 under anhydrous conditions. All of the PS-b-PHEMA/IDA/$H_3PO_4$ membranes were thermally stable up to $350^{\circ}C$, as revealed by thermal gravimetric analysis (TGA).

• Applied Biological Chemistry
• /
• v.39 no.5
• /
• pp.361-367
• /
• 1996

As a part of investigation for quality improvement of surimi gel from fish with a red muscle by addition of emulsion curd, we investigated the processing conditions of emulsion curd contained succinylated gelatin from conger eel skin as an emulsifier and emulsion curd-added surimi gel. Activity and stability of emulsion curd on standing at room temperature, chilled temperature and vibration were remarkably improved by the addition of 15 tunes of soybean oil and 5 times of water to succinylated gelatin from conger eel skin. The proximate composition of the emulsion curd was moisture 18%, protein 5%, lipid 76% and ash 0.5% and its appearance was white. Peroxide value and fatty acid composition of emulsion curd contained succinylated gelatin as an emulsifier were similar to these of soybean oil. By the addition of 6% of emulsion curd to mackerel surimi, gel strength, appearance and texture of the resulting surimi gel were improved, while its peroxide value and brown pigment revealed minor change. From the results of volatile basic nitrogen, viable cell counts and histamine content, the emulsion curd-added mackerel surimi gel can be safe In the sense of food sanitation.

• Journal of Korean Society of Forest Science
• /
• v.79 no.2
• /
• pp.109-114
• /
• 1990

The axillary buds of 15-year-old Tilia amurensis were cultured on Saito and Ide (IS), Murashige and Skoog (MS) media and woody plant medium (WPM) to establish an effective micropropagation method. Five levels of 6-benzylaminopurine (BAP) were tested. On IS medium and WPM addition of 1.0/l BAP enhanced shoot development and shoot elongation, whereas addition of 0.5/l BAP was effective on MS medium. A better results were obtained from WPM with 1.0/l BAP and MS with 0.1/l BAP. Developed shoots were subcultured on each basal media but with 0.2/l BAP, Multiple shoots were almost doubled in a month. Root formation could be enhanced at higher concentration of indole-3-butyric acid (IBA). Better rooting rate (83.3%) was achieved on a half-strength MS medium with 3.0 /l IBA. Regenerated plantlets were successfully transferred to soil. To investigate the clonal variation in shoot development and shoot elongation by axillary bud culturing, seven plus tree clones were tested, Clonal variation in tissue culturability among plus trees was recognized by the Duncan's multiple range test at the 5% level. Kang Won No. 12 showed the best response on WPM with 1.0/l BAP.

• Food Science and Preservation
• /
• v.19 no.6
• /
• pp.849-857
• /
• 2012

This study was conducted to determine the effects of the pretreatment and infrared drying methods on the physicochemical properties and antioxidant activities of dried peaches. The pretreatment methods were the 30 min treatment of NaCl, vitamin C, and soluble Ca (1:5 w/v immersion ratio), and leaving them untreated before infrared drying at $55^{\circ}C$ for 20 hr. The moisture content was lower in the pre-treated group and was significantly lowest in the 0.3% NaCl. The titratable acidity and soluble solid content and acid ratio (SS/TA) were high for the vitamin C and soluble Ca groups. The browning degree and cutting strength of the dried peach were lower in the pre-treated group. The total sugar content in the 0.3% NaCl group was significantly higher than those in the vitamin C and soluble Ca groups. The Ca contents were more effective in the soluble Ca treated group and increased with higher Ca concentration. The sensory evaluation results indicated that the organoleptic scores for the overall preference were higher in the 0.1% vitamin C treated group. The phenolic compounds and ABTS radical scavenging ability were high for the 0.1% vitamin C and 0.1% soluble Ca treated groups. These results suggest that pretreatment affected the qualities of the dried peaches, showing that infrared drying can be applied to the production of high quality dried peach products.

• Resources Recycling
• /
• v.28 no.4
• /
• pp.15-22
• /
• 2019

Coal combustion products are generated during coal combustion and can be grouped into fly ash and bottom ash depending on collection methods. Fly ash and bottom ash can be recycled for various purposes based on their characteristics. Australia is the fourth largest coal production country in the world and reuses coal ash as cement, concrete, mine filler, and agricultural soil amendment. When fly ash is used as a supplement for cement and concrete, strength of the cement and the durability of the concrete can be improved. Use of coal combustion product for mine backfill stabilizes underground mine voids and stores a large amount of coal ash in the voids. Because of alkalinity of coal combustion products, it can neutralize acid mine drainage when used for mine backfill. In addition, it can be used as an agricultural soil amendment to improve acidity and physical properties of the soil and to supply plant nutrients. Recycling of fly ash in Australia will be further expanded because of its low trace element contents that can be toxic to plants and low radioactive element contents existing within soil background concentrations. The characteristics of coal combustion products are related to the characteristics of the coal used for combustion, and since Korea imports coal from Australia, Korean coal combustion products also can be recycled for various purposes.