• Korean Journal of Environmental Biology
• /
• v.19 no.4
• /
• pp.232-238
• /
• 2001

Effects of atmospheric nitrogen deposition on terrestrial ecosystems were reviewed and discussed in this paper. The amount of nitrogen deposition has increased rapidly in Europe, North America and Korean due to industrialization, increase in fossil fuel combustion(automobiles in particular), and intensive agricultural activities. Nitrogen input through such deposition may enhance primary productivity at early stage, but it could cause nitrogen saturation and hence deterioration of forests of disturbance of systems in the long term. Mechanisms of the deterioration of forests by nitrogen deposition include nutrients imbalance, soil acidification, and immobilization of toxic ions. In addition, nitrogen deposition may impede the decomposition rates of soil organic matter, and induce eutrophication in aquatic ecosystems by enhanced leaching of nitrate. Finally, I propose several topics in relation to nitrogen deposition, which warrant further studies in Korea.

• 대한예방의학회:학술대회논문집
• /
• 1994.02a
• /
• pp.585-595
• /
• 1994

The region of the respiratory tract where inhaled particles deposit can have important implications for the causation of local or systemic toxic effects. For most aerosols of occupational importance, respiratory tract deposition can be predicted from the aerodynamic diameter of the particles. With the advent of cascade impactors, particularly those of personal sampler size, the determination of the aerodynamic diameters of aerosols has become more common. Some limitations of cascade impactor use are well recognized (e.g., particle bounce and substrate overloading) and are generally correctable. However, two important limitations of the instruments may not be receiving adequate attention: relative humidity effects on potentially hygroscopic aerosols and the collection characteristics of fibrous aerosols as compared to their actual deposition site potential. The results of this study, when compared to results of previous controlled laboratory trials, suggest that, while potentially hygroscopic lead aerosols from lead acid battery plant operations do not appear to be affected by changes in plant environmental humidity levels, the potential - exists for significant size changes upon inhalation. Secondly, fibers were detected in aerodynamic size ranges that would be associated with deep lung deposition; however, upon microscopic examination, these same fibers would actually be predicted to deposit in the upper airways. This study suggests that the physicalchemical properties and morphological features of an aerosol should be carefully considered by industrial hygienists before cascade impactors are used in attempts to predict the effects of inhaled aerosols.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.6
• /
• pp.850-855
• /
• 2007

Leptin is the adipocyte-specific product of the obese gene and plays a major role in food intake and energy metabolism. Leptin research was mainly focused on mammalian species, but understanding of leptin and its function in poultry is very poor. In this study, the duck leptin gene was amplified using the reverse transcription-polymerase chain reaction (RT-PCR) from duck liver RNA. The cDNA fragment was inserted into the pET-28a expression vector, and the resulting plasmid was expressed in Escherichia coli BL21 (DE3). Experimental mice were given an intraperitoneal injection of 10 mg/kg leptin dissolved in phosphate buffered saline (PBS), while the control mice were injected with PBS. The effect of leptin on food intake, body weight and fatty deposition in mice was detected. Sequence analysis revealed that duck leptin had a length of 438 nucleotides which encoded a peptide with 146 amino acid residues. The sequence shares highly homology to other animals. The coding sequence of duck leptin was 84 and 86% identical to human and pig leptin nucleotides sequence. Highest identity was with the rat coding sequence (95%). The identity of the amino acid sequence was 84, 82 and 96% respectively compared to that of the human, pig and rat. Results of SDS-PAGE analysis indicated that a fusion protein was specifically expressed in E. coli BL21 (DE3). The purified product was found to be biologically active during tests. Continuous administration of recombinant duck leptin inhibited food intake. Despite the decrease of food intake, leptin significantly induced body weight and fatty deposition. These changes were accompanied by a significant down-secretion of plasma glucose, cholesterol, triglyceride and insulin levels in mice. The observations provide evidence for an inhibitory effect of leptin in the regulation of food intake and for a potential role of duck leptin in the regulation of lipogenesis.

• Journal of Korea Soil Environment Society
• /
• v.1 no.2
• /
• pp.15-21
• /
• 1996

Effects of acid deposition on the acidification of surface water over a short term period were studied during June~October, 1995. A reservoir located in Chunchon, Kangwondo was selected for this study because this reservoir had received little man-made pollutants. Geological survey within the study area was carried out and the pH of a small and shallow stream flowing from the mountain valley down to the reservoir was monitored. Rainfall was measured by using a rain gauge and the precipitation was collected by automatic precipitation sampler. During the study period, rain pH was in the range of 3.81~5.77 with an average of 4.8. The EC was in the range of 5~189$\mu$S/cm with an average of 10.6$\mu$S/cm. ionic composition of the rainfall showed that of the anions, deposition of ${SO_4}^{2-}$, was highest with 3,119.7 kg/$\textrm{km}^2$, and it was $NH^{4+}$ with 1,053.2kg/$\textrm{km}^2$ for cations. The surface water pHs were maintained neutral or weak basic representing little evidence of acidification regardless of the acidic rainfall pH. Every time of sampling, however, the pHs exhibited increasing tendency as elevation of measuring site of the stream became lowered, which indicated the impacts of acid-base reactions by acidic or basic substances during travel of water downstream. This result suggested the necessity of further research to determine the respective buffering capacity of soil and underlying rocks.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.194-197
• /
• 1997

The LB technique is one of the most powerful fabricating methods of organic ultra-thin film, which deposits a monolayer films in molecular level on the surface of the substrate. We have investigated the electrical characteristics of Myristic acid, Stearic acid and Arachidic acid LB films for horizontal direction to develop for the gas sensor. The optimum conditions for a film deposition were obtained by measurement of $\pi$-A isotherm. The status of the deposited film was confirmed by measurement of UV absorbance. We could distingished the difference of I-V characteristics for the fatty acid for the horizontal direction. The conductivity of fatty acid LB films for horizontal direction was 10$^{-7}$ ~ 10$^{-9}$ [S/cm] that mean like semiconductor.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.4 no.1
• /
• pp.31-42
• /
• 2000

The dry deposition velocities and fluxes of air pollutants such as SO2(g), O3(g), HNO3(g), sub-micron particulates, NO3(s), and SO42-(s) were estimated according to local meteorological elements in the atmospheric boundary layer. The model used for these calculations was the multiple layer resistance model developed by Hicks et al.1). The meteorological data were recorded on an hourly basis from July, 1990 to June, 1991 at the Austin Cary forest site, near Gainesville FL. Weekly integrated samples of ambient dry deposition species were collected at the site using triple-fiter packs. For the study period, the annual average dry deposition velocities at this site were estimated as 0.87$\pm$0.07 cm/s for SO2(g), 0.65$\pm$0.11 cm/s for O3(g), 1.20$\pm$0.14cm/s for HNO3(g), 0.0045$\pm$0.0006 cm/s for sub-micron particulates, and 0.089$\pm$0.014 cm/s for NO3-(s) and SO42-(s). The trends observed in the daily mean deposition velocities were largely seasonal, indicated by larger deposition velocities for the summer season and smaller deposition velocities for the winter season. The monthly and weekly averaged values for the deposition velocities did not show large differences over the year yet did show a tendency of increased deposition velocities in the summer and decreased values in the winter. The annual mean concentrations of the air pollutants obtained by the triple filter pack every 7 days were 3.63$\pm$1.92 $\mu\textrm{g}$/m3 for SO42-, 2.00$\pm$1.22 $\mu\textrm{g}$/m-3 for SO2, 1.30$\pm$0.59 $\mu\textrm{g}$/m-3 for HNO3, and 0.704$\pm$0.419 $\mu\textrm{g}$/m3 for NO3-, respectively. The air pollutant with the largest deposition flux was SO2 followed by HNO3, SO42-(S), and NO3-(S) in order of their magnitude. The sulfur dioxide and NO3- deposition fluxes were higher in the winter than in the summer, and the nitric acid and sulfate deposition fluxes were high during the spring and summer.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.1
• /
• pp.34-47
• /
• 2010

Long-range transport of air pollutants was simulated using Comprehensive Acid Deposition Model (CADM) and Yonsei University-Sulfuric Acid Deposition Model (YU-SADM). For the simulation, weather patterns that represent the four seasons were derived through a clustering analysis with 5-years of meteorological data. The simulation result showed that in spring, influenced by strong low pressure from China, air pollutants of moved to the Korean Peninsula. In summer, humid air moved into the Korean Peninsula across the Yellow Sea while the north pacific high pressure extended, making the concentration of air pollutants lower than that in the other seasons. In autumn, air pollutants were transported by the northwest wind caused by the movement of high pressure over the Yellow Sea, while in winter air pollutants were influenced by northwest winds from continental highs. The amount of air pollutants in each season showed that high amount of pollutants were transported in winter due to the strong northwest wind. The in-flows were 3 to 8 times higher than those of the other seasons, and out-flows were about as twice as high. The amount of wet deposition in summer and autumn increased significantly compared to the amount in the other seasons due to the increase of rainfall. Source-receptor relationship analysis for sulfur showed that 70 to 91 precent of the total deposition came from the self-contribution by the Korean Peninsula. In winter, contribution from China was about 25 percent of the total deposition which was higher amount than any other season.

• Journal of Ecology and Environment
• /
• v.29 no.3
• /
• pp.305-321
• /
• 2006

Atmospheric Acid Deposition: Nitrogen Saturation of Forests: Volume weighted annual average wet deposition of nitroge at 33 sites in Korea during 1999-2004 ranged 7.28 to $21.05kgN{\cdot}ha^{-1}{\cdot}yr^{-1}$ with average $12.78kgN{\cdot}ha^{-1}{\cdot}yr^{-1}$, which values are similar level with nitrogen deposition of Europe and North America. The temperate forests that suffered long-term high atmospheric nitrogen deposition are gradually saturated with nitrogen. Such nitrogen saturated forest watersheds usually leach nitrate ion ($NO_3^-$) in stream water and soil solution. It may be likely that Korean forest ecosystems are saturated by much nitrogen deposition. In leaves with nitrogen saturation ratios of N/P, N/K and N/Mg are so enhanced that mineral nutrient system is disturbed, suffered easily frost damage and blight disease, reduced fine-root vitality and mycorrhizal activity. Consequently nitrogen saturated forests decrease primary productivity and finally become forest decline. Futhermore understory species are replaced the nitrophobous species by the nitrophilous one. In soil with nitrogen saturation uptake of methane ($CH_4$) is reduced and emission of nitrogen monoxide (NO) and nitrous oxide ($N_{2}O$) are increased, which gases are greenhouse gas accelerating global warming.

• Journal of the Korean Chemical Society
• /
• v.64 no.2
• /
• pp.67-73
• /
• 2020

The study aimed to investigate in vitro lipid deposition of oleic acid, oleic acid methyl ester and cholesterol on a daily disposable (1-day lenses) and 3-days lenses over 3 days and changes of optical characteristics is also investigated. Artificial tear solutions were prepared to simulate actual tear compositions. Two types of contact lenses (1-day lenses (Senofilcon A) and 3-days lenses (silicone tripolymer)) were soaked in the artificial tear solutions within an incubator at 37 ℃ with 150 rpm for 8, 16, 24 hours. Lipid deposition (oleic acid, oleic acid methyl ester and cholesterol) were measured using high performance liquid chromatography (HPLC) instrument. In addition, measurements of oxygen transmissibility, light transmittance and observation of lens surface were conducted. The amount of lipid deposition on the 1-day lenses were 127.55 ㎍/lens for Day 1, 302.96 ㎍/lens, for Day 2, and 353.30 ㎍/lens for Day 3. The 3-days lenses were 46.22 ㎍/lens for Day 1, 66.07 ㎍/lens for Day 2, and 67.45 ㎍/lens for Day 3. Oxygen transmissibility were 81×10^-9(cm/sec)(ml O₂/ml×mmHg)(Baseline) and 48×10^-9(cm/sec)(ml O₂/ml×mmHg) (Day 3) for the 1-day lenses, it were 13.23×10^-9(cm/sec)(ml O₂/ml×mmHg)(Baseline) and 9.6×10^-9(cm/sec)(ml O₂/ml×mmHg) (Day 3) for the 3-days lenses. Transmittance of each lenses were 97.21% (Baseline) and 94.25% (Day 3) for the 1-day lenses, 97.65% (Baseline) and 95.15% (Day 3) for the 3-days lenses. Observation of surface deposition indicated greatest deposition for the 3-days lenses type on Day 3. Lipid deposition for both lens types increased by day and was greater for the 1-day lenses type. Surface deposition appeared to differ as it was greatest for the 3 days lens type, which may suggest other deposits such as protein may be present.

• Carbon letters
• /
• v.14 no.2
• /
• pp.99-104
• /
• 2013

We investigated the effects of parametric synthesis conditions of catalysts such as sintering temperature, sorts of supports and compositions of catalysts on alignment and length-control of carbon nanotubes (CNTs) using catalyst powders. To obtain aligned CNTs, several parameters were changed such as amount of citric acid, calcination temperature of catalysts, and the sorts of supports using the combustion method as well as to prepare catalyst. CNTs with different lengths were synthesized as portions of molybdenum and iron using a chemical vapor deposition reactor. In this work, the mechanisms of alignment of CNTs and of the length-control of CNTs are discussed.